Huawei H31-211 Online Practice Questions and Exam Preparation

Huawei H31-211 Online Questions & Answers

• Question 181:

  Since the FR virtual circuit is connection-oriented and the different local DLCIs are connected to different peer devices, the local DLCI can be considered as the "frame relay address" of the peer device.

  A. True
  B. False
  A. True

• Question 182:

  Which of the following options is used to view the route that IP datagrams pass from one host to another?

  A. FTP
  B. Tracert
  C. ICMP
  D. Telnet
  B. Tracert

• Question 183:

  Assuming that there is an IP address of 190.5.6.1 and a subnet mask of 255.255.252.0, what is the network segment and subnet broadcast address of the IP address?

  A. 190.5.4.0 190.5.7.255
  B. 190.5.4.0 190.5.4.255
  C. 190.5.4.0 190.5.4.254
  D. 190.5.1.0 190.5.1.255
  A. 190.5.4.0 190.5.7.255

• Question 184:

  What are the characteristics of the OSPF routing protocol? (multiple choice)

  A. Using route number for path calculation
  B. No routing self-loop
  C. Route calculation can be done in different regions
  D. Suitable for routing between different Ass
  B. No routing self-loop
  C. Route calculation can be done in different regions

• Question 185:

  Which of the following devices work at the physical layer?

  A. Switch
  B. Hub
  C. Router
  D. Firewall
  B. Hub

• Question 186:

  If you need to log in to the device through Telnet or SSH, you need to configure a Telnet/SSH user.

  A. True
  B. False
  A. True

• Question 187:

  It is known that the mask of a network is 255.255.248.0, then what belongs to the same network segment?

  A. 10.110.16.1 and 10.110.25.1
  B. 10 .76 .129.21 and 10.76.137.1
  C. 10.52.57.34 and 10.52.62.2
  D. 10.33.23.2 and 10.33.31.1
  C. 10.52.57.34 and 10.52.62.2

• Question 188:

  In VRP, what are the following statements about RIP route aggregation?

  A. RIP V1 supports route aggregation by default. You can disable route aggregation when needed.
  B. RIP V2 supports off route aggregation.
  C. RIP V1 does not support CIDR
  D. RIP V2 supports subnet route aggregation
  B. RIP V2 supports off route aggregation.
  C. RIP V1 does not support CIDR
  D. RIP V2 supports subnet route aggregation

• Question 189:

  When the switch receives a data frame with a VLAN and there is no corresponding MAC record in the MAC entry, what happens to the switch?

  A. Discard
  B. Broadcast to all ports
  C. Broadcast within the VLAN identified by the data
  D. Not processed
  C. Broadcast within the VLAN identified by the data

• Question 190:

  Which of the following statements about VLANs are correct? (multiple choice)

  A. Users in different VLANs are not on one network segment.
  B. The number of VLANs that the switch can support is related to device performance.
  C. Users in different VLANs cannot communicate with each other.
  D. VLAN can effectively isolate broadcast packets.
  A. Users in different VLANs are not on one network segment.
  D. VLAN can effectively isolate broadcast packets.