Huawei H19-371 Online Practice Questions and Exam Preparation

Huawei H19-371 Online Questions & Answers

• Question 161:

  Which communication protocols does SmartLi battery support?

  A. RS485
  B. CAN
  C. SNMP
  D. Modbus-TCP
  A. RS485
  B. CAN

• Question 162:

  Which of the following functions need corresponding hardware support? ().

  A. Power distribution links.
  B. Battery Management
  C. U bit self-identification
  D. Temperature cloud map
  B. Battery Management
  C. U bit self-identification
  D. Temperature cloud map

• Question 163:

  Configure the UPS system scheme, which of the following factors need to be considered in the calculation scheme ( )

  A. UPS type, capacity and parallel mode
  B. The brand and capacity of the battery
  C. Make and model of AC and DC cables
  D. Configuration of battery rack and battery switch box
  A. UPS type, capacity and parallel mode
  B. The brand and capacity of the battery
  C. Make and model of AC and DC cables
  D. Configuration of battery rack and battery switch box

• Question 164:

  Huawei's proprietary protocol BIN protocol is used for communication between the NetEco management system and the ECC800 collector ( ).

  A. True
  B. False
  A. True

• Question 165:

  Which of the following is true about the micro-module and fire protection system? ()

  A. When a fire alarm occurs in the channel, the computer room controller (ECC800) can send the signal to the building fire protection system
  B. ECC800 can control sunroof rollover
  C. The building fire protection system can send fire signal to the computer room controller (ECC800)
  D. ECC800 controller can be linked with building fire
  A. When a fire alarm occurs in the channel, the computer room controller (ECC800) can send the signal to the building fire protection system
  B. ECC800 can control sunroof rollover
  C. The building fire protection system can send fire signal to the computer room controller (ECC800)
  D. ECC800 controller can be linked with building fire

• Question 166:

  Which of the FusionModule800 require site survey? (

  A. The way of the pipe
  B. Mains to Module Cable Length
  C. Length between inside and outside machine
  D. Wiring method
  A. The way of the pipe
  B. Mains to Module Cable Length
  C. Length between inside and outside machine
  D. Wiring method

• Question 167:

  The operating temperature range of FusionModule800 is -40-45 degrees, and the operating temperature range of FusionModule500 is 0~45 degrees (

  A. True
  B. False
  B. False

• Question 168:

  In Fusionmodule2000, the linkage between the indoor and outdoor units of the air conditioner can control the speed of the fan and the speed of the compressor to reduce the power consumption of a single unit ()

  A. True
  B. False
  A. True

• Question 169:

  The NetEco management system adopts a large-capacity design architecture, which can support access to a large number of devices, and supports the use of a single X86 server to achieve access to () 10,000 test points. At the same time, the system operates smoothly, and the CPU utilization is not higher than () ?

  A. 50, 70
  B. 100, 70
  C. 50, 90
  D. 100, 90
  D. 100, 90

• Question 170:

  Are the FusionModule500andFusionModule800 air conditioners connected to the back end of the UPS?

  A. True
  B. False
  B. False