Huawei H13-629 Online Practice Questions and Exam Preparation

Huawei H13-629 Online Questions & Answers

• Question 181:

  Huawei Standard Edition N8500 has two nodes named Pubeth1 and Pubeth4. It opened the NFS service. NFS server accepts recovery after NFS guest. However, the client mount point can not be accessed into the directory for a long time without echo. What do you need to do to fix it?

  A. Restart the NFS server of the N8500
  B. Restart the client's NFS service
  C. Reseat the NFS client network cable
  D. Forcibly unmount the NFS client mount point and mount it again
  D. Forcibly unmount the NFS client mount point and mount it again

• Question 182:

  In Huawei OceanStor 9000, the client that processes the write request performs data fragmentation according to the protection level specified in the file, divides the data chip, writes the corresponding node on power-saving memory, and then calculates the parity of each node data pieces, and writes to each node's power-saving memory. After the node writes the power-save memory, the write operation is successful.

  A. True
  B. False
  B. False

• Question 183:

  In an 8500 Clustered NAS System there are several modules in the cluster communication architecture that work together to implement cluster communication such as resource agent, HAD, Gab, and LLT. Describe the correct mechanism for these. (Multiple choice.)

  A. Agent-Agent monitors the resources of each system and provides the status to each machine's HAD
  B. HAD Cluster service that monitors and manages the cluster's NAS
  C. Under the management of the master node of the cluster, Gab sends the communication information between the cluster members to the point communication
  D. LLT (Low-Latency Transport) sends information to all nodes in the cluster through a low-latency delivery protocol
  A. Agent-Agent monitors the resources of each system and provides the status to each machine's HAD
  B. HAD Cluster service that monitors and manages the cluster's NAS
  D. LLT (Low-Latency Transport) sends information to all nodes in the cluster through a low-latency delivery protocol

• Question 184:

  Which of the following is correct regarding FTP passive transmission mode:

  A. The server initiates the establishment of a data connection request
  B. The FTP client uses the pasv command to tell the FTP server its own IP and port number
  C. FTP server uses the pasv command to tell the FTP client's own IP and port number
  D. The target port number that initiated the data connection request may be 29999
  D. The target port number that initiated the data connection request may be 29999

• Question 185:

  Using Simpana for backup, you set this policy as follows: The retention period of data is 15 days and 2 periods, once every 10 days. How many days will data be retained after the failure?

  A. 15
  B. 20
  C. 25
  D. 30
  B. 20

• Question 186:

  Which command will modify vg01 into vg - app without affecting the HPUX 11.31 system volume group?

  A. can not sit down
  B. vgchange
  C. vgexport mkdir mknod vgimport
  D. vgremove mkdir mknod vgcreate
  C. vgexport mkdir mknod vgimport

• Question 187:

  Which of the following features is supported by OceanStor V3 Thin Lun? (Multiple choice)

  A. smart Erase
  B. smart Dedupe
  C. smart Compression
  D. Volume mirror
  B. smart Dedupe
  C. smart Compression

• Question 188:

  An Engineer installed a OceanStor 9000 for a customer (a total of 5 OceanStor 9000 C Node, front and rear ends are 10GE TOE networking, on-site installation TOE network card). Then connected the signal lines, power lines, and debugged the software. During the installation there were issues. Which of the following description of these issues are correct? (Multiple choice.)

  A. 5 devices TOE NIC A0, B1, and A0, B3 inserted into the PCIe slot will not affect the system. Deployment will not affect the network bandwidth, so it cannot be adjusted.
  B. The signal cables are long and need to be strapped to the cabinet or placed on the bottom tray.
  C. Label NODE 01 A0-0 The signal cable is inserted in the network port A0-1. The signal cable labeled NODE01 B3-1 is inserted in the network position B3-0, due to the same network card two network port peer, you can place the wrong line, you cannot adjust.
  D. CE6850 switch connected to two stacked copper cables, one of which is needed to post-cold more cold, because it does not affect the network interoperability. You can base this software debugging.
  B. The signal cables are long and need to be strapped to the cabinet or placed on the bottom tray.
  D. CE6850 switch connected to two stacked copper cables, one of which is needed to post-cold more cold, because it does not affect the network interoperability. You can base this software debugging.

• Question 189:

  When using OceanStor V3, you need to mount the file system snapshot to access the snapshot data.

  A. True
  B. False
  B. False

• Question 190:

  Simpana client failed to the perform backup task. When you view the task status, it reports the following error: libary mediaagent drive pool media

  []: Mount path is offlline advice: please check if the mount path is online and accessible "

  What can cause this?

  A. Client offline
  B. Media Server Offline
  C. The client can not resolve the media server host name
  D. backup media failure
  D. backup media failure