Huawei H12-811 Online Practice Questions and Exam Preparation

Huawei H12-811 Online Questions & Answers

• Question 761:

  In order for the STA to obtain the SSID related information on the AP, which of the following messages is used by the AP to proactively declare the wireless network SSID information? ()

  A. Join
  B. eacon
  C. Probe
  D. Discovery
  B. eacon

• Question 762:

  As shown in the figure, after the two routers are configured with 0SPF, the administrator configures the command on RTA. Is the following description correct? () (Multiple Choice Questions)

  

  A. RTA will continue to receive, analyze and process OSPF packets sent by RTB
  B. The neighbor relationship between the two routers will be down
  C. The neighbor relationship between the two routers will not be affected
  D. RTA will no longer send OSPF packets
  B. The neighbor relationship between the two routers will be down
  D. RTA will no longer send OSPF packets

• Question 763:

  Which of the following protocols consist of the PPP agreement? ()*

  A. NCP
  B. PPPOE
  C. Authentication protocol
  D. LCP
  A. NCP
  C. Authentication protocol
  D. LCP

• Question 764:

  In the network shown in the figure below, the switch uses VLANIF interfaces to connect with the router sub-interfaces. Which of the following configurations can achieve this requirement? () (Single-choice question)

  

  A. interface Vlanif10 Ip address10.0.12.1255.255.255.0 # Interface GigabitEthernet 0/0/2 Port link-type trunk Port trunk pvid 10 Port trunk allow-pass vlan 10 #
  B. interface Vlanif10 Ip address10.0.12.1255.255.255.0# Interface GigabitEthernet 0/0/2 Port link-type trunk Port trunk allow-pass vlan 10#
  C. interface Vlanif10 Ip address10.0.12.1255.255.255.0# Interface GigabitEthernet 0/0/267 Port link-type hybrid Port hybrid untag vlan 10 #
  D. interface Vlanif10 Ip address10.0.12.1255.255.255.0# Interface GigabitEthernet 0/0/2 Port link-type access Port default vlan 10
  B. interface Vlanif10 Ip address10.0.12.1255.255.255.0# Interface GigabitEthernet 0/0/2 Port link-type trunk Port trunk allow-pass vlan 10#

• Question 765:

  Which of the following statements is correct? ()

  A. The router works at the physical layer
  B. The switch works at the physical layer
  C. The switch works at the network layer
  D. The router works at the network layer
  D. The router works at the network layer

• Question 766:

  Which of the following IPv6 is a global unicast address ()

  A. 2001::12:1
  B. FF02:1
  C. FF:02:2E0:FCFF:FEEF:FEC
  D. FEE:FCFF:FEEF:FEC
  A. 2001::12:1

• Question 767:

  About the above configuration command is correct ()

  A. Modify the user's authority level to 3. And save the configuration
  B. Modify the limit level of the save command used by a user to 3
  C. Modify the permission level of the user view command to 3, and save the matching sinus
  D. Modify the permission level of the save command in the user view to 3
  D. Modify the permission level of the save command in the user view to 3

• Question 768:

  According to the following configuration, which statement is correct? () (Multiple Choice Questions)

  

  Int g0/0/1 Int g0/0/2 Port hybrid pvid vlan 20 Port hybrid pvid vlan 10 Port hybrid untagged vlan 10 20 Port hybrid untagged vlan 10 20

  A. Host A (PC3) can ping through host B (PC4) more
  B. The pvid of switch G0/0/1 port is 20
  C. The two link data frames do not contain vlan tag
  D. Host A (PC3) cannot ping host B (PC4)
  A. Host A (PC3) can ping through host B (PC4) more
  B. The pvid of switch G0/0/1 port is 20
  C. The two link data frames do not contain vlan tag

• Question 769:

  Which of the following are not layers in the TCP/IP model? (Choose all that apply.)

  A. Session layer
  B. Network layer
  C. Application layer
  D. Presentation layer
  E. Transport layer
  A. Session layer
  D. Presentation layer

• Question 770:

  On Huawei routers, what is the default value of the OSPF protocol internal routing priority? ()

  A. 20
  B. 10
  C. 30
  B. 10