Huawei H12-224 Online Practice Questions and Exam Preparation

Huawei H12-224 Online Questions & Answers

• Question 461:

  STP elects ( )

  A. One bridge as the Root Bridge and another one as the Backup Root Bridge
  B. One bridge as the Root Bridge
  C. Two bridges as the Root Bridge
  D. One Designated Bridge
  B. One bridge as the Root Bridge

• Question 462:

  What is the maximum number of security zones supported by the Eudemon?

  A. 256
  B. 128
  C. 32
  D. 16
  D. 16

• Question 463:

  Which of the following statements regarding VLAN configuration are true? (Choose two.)

  A. You can enter the VLAN view and create a VLAN at the same time.
  B. Running undoVLANinvalidates the VLAN but the VLAN still exists. You do not need to recreate the VLAN to use it.
  C. You can configure a description string of VLAN. The length of the string is unlimited.
  D. If the VLAN ID is not entered when running the displayVLANcommand, all information about the VLAN will be displayed.
  A. You can enter the VLAN view and create a VLAN at the same time.
  D. If the VLAN ID is not entered when running the displayVLANcommand, all information about the VLAN will be displayed.

• Question 464:

  Which of the following routers have multicast routing entries even when there is no receiver on the network? (Choose two.)

  A. Source's DR
  B. Receiver router
  C. Intermediate router
  D. RP
  A. Source's DR
  D. RP

• Question 465:

  Which statements about DHCP snooping are true? (Choose three.)

  A. The DHCP snooping binding table contains dynamic binding entries and static binding entries.
  B. DHCP snooping distinguishes the trusted interface and untrusted interfaces and discards DHCP Reply messages from untrusted interfaces.
  C. The static binding table is manually configured on the inbound interface and the aging time can also be manually set.
  D. When DHCP snooping is used at Layer 2, the interface information can be obtained for the binding table even if the Option 82 function is not configured.
  A. The DHCP snooping binding table contains dynamic binding entries and static binding entries.
  B. DHCP snooping distinguishes the trusted interface and untrusted interfaces and discards DHCP Reply messages from untrusted interfaces.
  D. When DHCP snooping is used at Layer 2, the interface information can be obtained for the binding table even if the Option 82 function is not configured.

• Question 466:

  Which of the following statements regarding Agile Controller guest account application mode is false?

  A. Created by the administrator
  B. Created by employees with guest management rights
  C. Created by the receptionist
  D. Registered by guests
  C. Created by the receptionist

• Question 467:

  An OSPF neighbor relationship fails to be established and the display ospf error command output is as follows.

  

  Which of the following is the possible cause?

  A. Router IDs conflict.
  B. Area IDs are mismatched.
  C. Network masks are inconsistent.
  D. Authentication types are inconsistent.
  A. Router IDs conflict.

• Question 468:

  In a complex network environment containing finance, OA, production, and more service systems, which of the following items is the first concern for troubleshooting?

  A. IP address assignment
  B. Network device model
  C. Data flow direction of each service system
  D. Equipment room environment
  C. Data flow direction of each service system

• Question 469:

  Which of the following statements regarding RPs are true? (Choose three.)

  A. Different group addresses on a PIM-SM network corresponds to different RPs.
  B. An RP is the root of an RPT.
  C. An RP is elected out of BSRs.
  D. All routers on a PIM-SM network must automatically discover the location of RPs.
  A. Different group addresses on a PIM-SM network corresponds to different RPs.
  B. An RP is the root of an RPT.
  D. All routers on a PIM-SM network must automatically discover the location of RPs.

• Question 470:

  Which statements about the VLAN on S series switches are true? (Choose two.)

  A. The VLAN IDs on the switch range from 1 to 4090.
  B. The switch has a default VLAN.
  C. The priority value in the VLAN tag can be changed on the switch.
  D. A VLAN tag contains one byte.
  B. The switch has a default VLAN.
  C. The priority value in the VLAN tag can be changed on the switch.