EMC E20-375 Online Practice Questions and Exam Preparation

EMC E20-375 Online Questions & Answers

• Question 61:

  A conversion from RecoverPoint/SE to RecoverPoint/EX was just completed. What is the next required step?

  A. Remove RecoverPoint/SE license, then add RecoverPoint/EX license
  B. Add RecoverPoint/EX license directly, because the newly added license will replace the existing one
  C. Run a health check of RecoverPoint/EX
  D. Reconfigure the Consistency Groups
  A. Remove RecoverPoint/SE license, then add RecoverPoint/EX license

• Question 62:

  A customer wants to implement a two-node RecoverPoint solution with local replication. How many IP addresses are required for each cluster?

  A. 2
  B. 3
  C. 4
  D. 5
  D. 5

• Question 63:

  What must be installed on the VNX prior to deploying the RecoverPoint Write splitter?

  A. RecoverPoint Splitter Enabler only
  B. RecoverPoint Driver and RecoverPoint Splitter Enabler
  C. RecoverPoint License
  D. Unisphere Service Manager
  A. RecoverPoint Splitter Enabler only

• Question 64:

  Which Image Access Mode should be used when large portions of an image might be changed?

  A. Logged Access
  B. Virtual Access (without Roll)
  C. Snap Access
  D. Virtual Access (with Roll)
  A. Logged Access

• Question 65:

  You are using the Test a Copy wizard and have chosen virtual access to test your database upgrade. The image has been mounted to a test host. While testing the database upgrade, the host loses access to the image. What can you do to avoid this problem in the future?

  A. Add more journal capacity
  B. Add an RPA to the local RecoverPoint cluster
  C. Re-enable image access
  D. Mount the image to another host
  A. Add more journal capacity

• Question 66:

  What collection period is automatically set when `Collect System Information' is run from the `System Events' pane?

  A. From 10 min. before to 10 min. after the selected event
  B. From 30 min. before to 30 min. after the selected event
  C. From 60 min. before to 60 min. after the selected event
  D. The previous 24 hours
  A. From 10 min. before to 10 min. after the selected event

• Question 67:

  You ran Collect System Information from an RPA. However, you forgot where you specified to save the logs on the FTP server. What is the recommended way to retrieve the logs?

  A. Use http:// /info
  B. Re-run Collect System Information from the RPAs
  C. Re-run Collect System Information from the GUI
  D. Use ftp://
  A. Use http:// /info

• Question 68:

  Which IP diagnostic command is used to test the IP connectivity performance between RPAs when the 'Test Throughput' option is chosen in the RPA interface?

  A. iperf
  B. top
  C. ethtool
  D. netstat
  A. iperf

• Question 69:

  When is the Open Replicator RecoverPoint session created for each production volume in the Consistency Group (CG)?

  A. CG is enabled
  B. CG is created
  C. LUN is attached to the splitter
  D. LUN is added to an RSET
  A. CG is enabled

• Question 70:

  What Installation Manager menu selections would you make to view the VNX iSCSI ports?

  A. 3 - Diagnostics > 2 - SAN diagnostics > 2 - View RPA ports
  B. 3 - Diagnostics > 1 - IP diagnostics > 2 - View IP details
  C. 3 - Diagnostics > 2 - SAN diagnostics > 3 - View target LUNs
  D. 3 - Diagnostics > 1 - IP diagnostics > 6 - System connectivity
  A. 3 - Diagnostics > 2 - SAN diagnostics > 2 - View RPA ports