EMC E20-361 Online Practice Questions and Exam Preparation

EMC E20-361 Online Questions & Answers

• Question 211:

  You want to create a CIFS server within a VDM loaded on server_2. The action fails. What is the reason?

  A. An existing CIFS server on the physical DM is already consuming all unused interfaces.
  B. There is no file system mounted on the VDM running on the physical Data Mover.
  C. The CIFS service is not started.
  D. The VDM is in a loaded state.
  A. An existing CIFS server on the physical DM is already consuming all unused interfaces.

• Question 212:

  There is a conflict between a locally established auditing policy of a Data Mover's CIFS server and the OUs GPO in a customers domain. Which policy will take precedence?

  A. Domain policy is used
  B. Locally configured policy
  C. Most restrictive policy
  D. Policy specified by the GPO
  C. Most restrictive policy

• Question 213:

  The file system fs01 must be mounted and exported on /mp1 as a CIFS share so only fs01 can be seen by users. To do this, a system administrator will need to

  _ mount fs01 to /mp1/fs01 _ export /mp1/fs01 as a CIFS share What other step will the system administrator need to take to present this share so users only see fs01?

  A. create the directory /mp1/fs01 from a Windows host
  B. move .etc and lost+found to another directory.
  C. mark .etc and lost+found as hidden.
  D. unmount fs01 from /mp1
  A. create the directory /mp1/fs01 from a Windows host

• Question 214:

  Upon issuing IPCONFIG, an IP address of 169.254.0.4 is returned for a Windows client. The IP address is NOT a valid address in the DHCP server's scope. What is the cause of this problem?

  A. The client could not reach the DHCP server and obtained the default addressing from a domain controller
  B. The gateway router detected the DHCP server was attempting to provide an IP address outside the client's subnet and provided the default client address instead
  C. The PC. was unable to reach a DHCP server and "auto-configuration" was enabled on the client
  D. The primary DHCP server was unavailable and the address was received from the secondary DHCP server
  C. The PC. was unable to reach a DHCP server and "auto-configuration" was enabled on the client

• Question 215:

  You enter the following command: nas_fs -create size=3M pool=clar_r5_economy What will be the result?

  A. The file system is created with a default file system name.
  B. The file system and a mountpoint are created.
  C. Only the mountpoint is created.
  D. The file system is not created.
  A. The file system is created with a default file system name.

• Question 216:

  By default, which protocols are used when transporting DNS-related traffic from a Data Mover?

  A. IP and TCP
  B. UDP and lCMP
  C. UDP and IP
  D. UDP and TCP
  C. UDP and IP

• Question 217:

  How is Kerberos used within the Active Directory?

  A. For user authentication
  B. For time synchronization
  C. Provides encryption of stored user passwords
  D. Provides Dynamic DNS updates
  A. For user authentication

• Question 218:

  Which Celerra NS component is supplied with power by the SPS?

  A. Control Station
  B. Data Mover
  C. First DAE2
  D. Second DAE2
  C. First DAE2

• Question 219:

  A customer is setting up a CIFS environment and has decided to run usermapper. Where is the default service located?

  A. Runs in a Virtual Data Mover environment
  B. Runs on a Control Station
  C. Runs on a Data Mover
  D. Runs on an external server
  C. Runs on a Data Mover

• Question 220:

  What is a way of mapping Windows SIDs to UIDs and GIDs?

  A. NDS
  B. NetBios
  C. NIS
  D. Usermapper
  D. Usermapper