CWNP CWDP-305 Online Practice Questions and Exam Preparation

CWNP CWDP-305 Online Questions & Answers

• Question 281:

  When installing a cloud-based AP, what is the most common process used? Response:

  A. Configure the AP as an autonomous AP and then, when it connects to the cloud, it will be reconfigured.
  B. Configure a profile for the AP in the cloud and then connect it for automatic configuration.
  C. Connect the AP to the network and configure it from the cloud assigning a configuration or policy set to the AP.
  D. Configure the AP with a local controller and then, when it connects to the cloud, it will be reconfigured.
  B. Configure a profile for the AP in the cloud and then connect it for automatic configuration.

• Question 282:

  A customer is acquiring a new VoWLAN system to replace their existing wired phone system. When reading about his system's requirements, you learned that is requires 25 db of SNR to work as expected. After surveying the environment, you discovered that the noise floor is -88 dBm. What should be the minimum RSSI value to meet the system's requirements?

  A. -70 dBm
  B. -67 dBm
  C. -65 dBm
  D. -63 dBm
  D. -63 dBm

• Question 283:

  What advantages are provided by per-user PSKs when compared with ESS-wide PSKs?(Choose all that apply.) Response:

  A. Per-user PSKs allow easier user-based access control with WPA/WPA2-Personal security.
  B. Per-user PSKs are easier to manage if a PSK is compromised or an employee leaves a company.
  C. Per-user PSKs are standardized and certified by the Wi-Fi Alliance.
  D. Per-user PSKs are more secure than ESS-wide PSKs because they support mutual authentication.
  B. Per-user PSKs are easier to manage if a PSK is compromised or an employee leaves a company.

• Question 284:

  A business traveler from North America is in Europe. The hotel only provides coverage in 2.4 GHz. The traveler connects to the hotel's SSID and notices an AP in the hotel room. However, the laptop reports a very low RSSI when connected. The traveler does not have the same problem when connecting in the lobby. What would be the most likely cause of the low RSSI in the hotel room?

  A. The AP in the room is using ZigBee instead of Wi-Fi.
  B. The AP in the room is transmitting on channel 13 and the traveler associated to a non- channel 13 AP located elsewhere.
  C. The switchport that the AP is connected to is only capable of transmitting at 10 Mbps.
  D. The AP in the room is using Bluetooth instead of Wi-Fi.
  B. The AP in the room is transmitting on channel 13 and the traveler associated to a non- channel 13 AP located elsewhere.

• Question 285:

  Which document provided to your customer should include all devices and parts that will be used during the deployment of their WLAN infrastructure?

  A. SoW (Statement of Work)
  B. BoM (Bill of Materials)
  C. Design report
  D. Project plan
  B. BoM (Bill of Materials)

• Question 286:

  What is the DSCP Per Hop Behavior equivalent classification of the 802.11 AC_VO priority level?

  A. AF31
  B. CS3
  C. VO
  D. EF
  D. EF

• Question 287:

  Which document provides detailed instructions for installation technicians on how to properly mount and configure access points (APs)?

  A. Hold Harmless
  B. Statement of Work
  C. Bill of Materials
  D. Physical installation guide
  D. Physical installation guide

• Question 288:

  What limitation exists when WMM is not enabled on an 802.11n WLAN? Response:

  A. The maximum channel-width will be 20MHz
  B. Only two ACs will be available
  C. EDCA values will change
  D. 802.11 QoS will not be available
  D. 802.11 QoS will not be available

• Question 289:

  You're about to deploy an Enterprise-class VoWLAN infrastructure. You need to ensure that QoS is properly configured throughout the network. What Access Category (AC) should voice frames/packets use?

  A. AC_VI
  B. AC_VO
  C. AC_BE
  D. AC_BK
  B. AC_VO

• Question 290:

  An organization has chosen to implement Wi-Fi 6E and operates in a regulatory domain allowing the use of all 6 GHz channels. Why can 40 MHz channels be used more easily in this network than one operating in the 5 GHz band?

  A. Because ACI works differently in 6 GHz than in 5 GHz
  B. Because many more channels are available
  C. Because Wi-Fi 6E supports 40 MHz as a primary channel and ignores 20 MHz primary channels
  D. Because 6 GHz Wi-Fi uses Single Channel Architecture instead of Multiple Channel Architecture
  B. Because many more channels are available