HP HP2-T26 Online Practice Questions and Exam Preparation

HP HP2-T26 Online Questions & Answers

• Question 1:

  Click the area of the graphic where you view diagnostic test error information.

  Hot Area:

  

  

• Question 2:

  Click the area of the graphic where you view diagnostic test error information.

  

  

• Question 3:

  Click on the Ethernet pass-thru module in the graphic.

  Hot Area:

  

  

• Question 4:

  Click on an Onboard Administrator module in the graphic.

  Hot Area:

  

  

• Question 5:

  Click the area of the graphic where you view diagnostic test error information.

  Hot Area:

  

  

• Question 6:

  A customer is experiencing intermittent storage connectivity issues in their BladeSystem environment. After collecting the log files from the external storage system and the interconnects, you determine the problem is in the Onboard Administrator configuration.

  Which step should you take next in the troubleshooting process?

  A. Implement preventive measures.
  B. Initiate the replacement procedure of the midplane.
  C. Plan the repair procedure.
  D. Verify if the solution is covered by a carepack.
  C. Plan the repair procedure.

• Question 7:

  When you try and boot a previously installed operating system, a BL495c G6 Server Blade freezes. What is the first step you should take when troubleshooting this problem?

  A. Load and try to boot the latest SmartStart CD.
  B. Use iLO to access the Integrated Management Log (IML) of the failing server blade.
  C. Load and try to run the HP Insight Diagnostics Online Edition.
  D. Use iLO to access the enclosure Onboard Administrator.
  B. Use iLO to access the Integrated Management Log (IML) of the failing server blade.

• Question 8:

  What should be done after a repair has been validated?

  A. The IML log entry should be marked as repaired.
  B. The failed entry should be cleared from the IML.
  C. All IML entries should be cleared to make room for future entries.
  D. All outstanding IML entries should be marked repaired.
  B. The failed entry should be cleared from the IML.

• Question 9:

  A customer has an SB40c paired with a full height blade. The blade cannot access the SB40c storage. Which component in the blade may need to be replaced?

  A. QLogic or Emulex HBA mezzanine card
  B. InfiniBand mezzanine card
  C. P700 Smart Array mezzanine card
  D. PCI Express Mezzanine Pass-Thru
  D. PCI Express Mezzanine Pass-Thru

• Question 10:

  A server blade has a memory error. All the LEDs in all the banks are illuminated. What should you do first to address this issue?

  A. Simultaneously replace the memory in all the banks.
  B. Replace the system board that the memory is connected to.
  C. Replace the processor, which is causing a false memory error.
  D. Replace one memory bank at a time.
  D. Replace one memory bank at a time.