HP HP2-T23 Online Practice Questions and Exam Preparation

HP HP2-T23 Online Questions & Answers

• Question 1:

  An HP P421/1GBFBWC controller with three hard disks is configured as RAID 5. What is the minimum requirement to upgrade the disk configuration to RAID 60? (Select two.)

  A. Five more hard disks
  B. Three more hard disks
  C. Smart Array Advanced Pack 2.0
  D. BBWC
  B. Three more hard disks
  C. Smart Array Advanced Pack 2.0

• Question 2:

  What is a function of the 3D Sea of Sensors on ProLiant Gen8 servers?

  A. They maintain a copy of the host server Integrated Management Log (IML).
  B. They record user actions such as powering the server on and off and making user configuration changes, and generate an audit log
  C. They power on fans and make other adjustments to reduce energy usage when temperatures get too high
  D. They reduce the number of fans required by 50% compared to previous ProLiant server models
  C. They power on fans and make other adjustments to reduce energy usage when temperatures get too high

• Question 3:

  What are some general requirements that must be met to update Virtual Connect firmware? (Select three.)

  A. The VC domains must not be in Maintenance Mode, so the firmware updates have direct access.
  B. The correct deployment order must be set.
  C. Multiple instances of the Virtual Connect Support Utility (VCSU) must be run, with multiple clients, to access an enclosure faster.
  D. The enclosure must not be part of a domain.
  E. The VC firmware must not be flashed before the configuration is backed up.
  B. The correct deployment order must be set.
  D. The enclosure must not be part of a domain.
  E. The VC firmware must not be flashed before the configuration is backed up.

• Question 4:

  Which statement describes the features of Service Pack for ProLiant (SPP)?

  A. SPP is a combination of the PSPs and the HP SmartUpdate Firmware DVD.
  B. SPP requires configuration through RBSU.
  C. SPP is the replacement for the Service and Diagnostics tools.
  D. SPP is supported only on servers running a Windows operating system.
  C. SPP is the replacement for the Service and Diagnostics tools.

• Question 5:

  What should a system administrator use to save an enclosure backup?

  A. HP One Button Disaster Recovery (OBDR)
  B. SmartStart Scripting Toolkit
  C. Amirrored drive
  D. Aconfiguration script
  D. Aconfiguration script

• Question 6:

  Which tools should you use to identify correctable memory errors on a ProLiant Gen8 server that has an operating system without HP management agents installed? (Select two)

  A. iLO
  B. System Management Home page
  C. Active Health System
  D. ACU
  E. ROM
  A. iLO
  C. Active Health System

• Question 7:

  Which HP tools should you use to determine that an SSD drive has degraded as a result of a large number of write operations? (Select three.)

  A. Array Configuration Utility (ACU)
  B. ROM Based Setup Utility (RBSU)
  C. SmartSSD Wear Gauge
  D. Option ROM Configuration for Arrays (ORCA) E. Array Diagnostic Utility (ADU)
  C. SmartSSD Wear Gauge
  D. Option ROM Configuration for Arrays (ORCA) E. Array Diagnostic Utility (ADU)

• Question 8:

  You are viewing the current driver and firmware status in the Version Control Agent (VCA) and notice that only one column of information is presented.

  What must you do to see the current status and the latest revision available?

  A. Reboot the server to use the new VCA version, because the server has recently installed updates.
  B. Upgrade the System Management Homepage (SMH) VCA to the latest version to reflect the changes needed to access the new revisions.
  C. Set up the central management server (CMS) to check for the latest Service Pack for ProLiant (SPP) and push it to the VCA.
  D. Configure the VCA to use the Version Control Repository Manager (VCRM).
  B. Upgrade the System Management Homepage (SMH) VCA to the latest version to reflect the changes needed to access the new revisions.

• Question 9:

  How can you verify that the system and option ROMs in a ProLiant server are the latest version?

  A. Review the information in the Insight Display
  B. Launch the Intelligent Management Center and view updates.
  C. Restart the server and review ORCA
  D. Restart the server and review POST.
  A. Review the information in the Insight Display

• Question 10:

  Which technologies are supported on a ProLiant Gen8 server blade when the appropriate mezzanine card is installed along with the FlexFabric interconnects? (Select two)

  A. iSCSI
  B. InfiniBand
  C. Accelerated Ethernet
  D. Adaptive Fibre Channel
  E. FCoE
  B. InfiniBand
  C. Accelerated Ethernet