HP HP0-J66 Online Practice Questions and Exam Preparation

HP HP0-J66 Online Questions & Answers

• Question 1:

  A customer is planning to migrate data from an HP EVA4400 to an HP 3PAR StoreServ 7000 Storage System. What should the customer use to migrate the data?

  A. Recovery Manager
  B. Online Import
  C. Peer Motion
  D. Remote Copy
  B. Online Import

  ---

  explanation:

  EVA to 3PAR Online Import manages the migration of data from a source EVA storage system to a destination 3PAR storage system. Using EVA to 3PAR Online Import, you can migrate EVA virtual disks and host configuration information to

  a 3PAR destination storage system without changing host configurations or interrupting data access.

  Incorrect:

  Not C: Peer Motion can be used for HP 3PAR not for HP EVA:

  HP 3PAR Peer Motion Software is the first non-disruptive, do-it-yourself data migration tool for enterprise block storage. With Peer Motion, HP 3PAR Storage System customers can load balance I/O workloads across systems at will, perform

  technology refresh seamlessly, cost- optimize asset lifecycle management, and lower technology refresh capital expenditure.

  Unlike traditional block migration approaches, Peer Motion enables customers to migrate storage volumes between any HP 3PAR Storage Systems online, non-disruptively, and without complex planning or dependency on extra tools. Peer

  Motion leverages HP 3PAR Thin Built InTM technology to power the simple and rapid inline conversion of inefficient, "fat" volumes on source arrays to more efficient, higher-utilization "thin" volumes on the destination 3PAR Storage System.

  Peer Motion Manager is an add-on application that orchestrates all stages of the data migration lifecycle to ensure data migration is simple and fool-proof.

• Question 2:

  A customer is looking for a new storage system that provides storage management security for their Windows-based environment. They are considering an HP StoreVirtual 4000.

  Which security function does this solution provide?

  A. Active Directory support
  B. Centralized Management Console (CMC) authentication
  C. proxy server exclusion
  D. quorum alarms
  A. Active Directory support

  ---

  explanation:

  Note:

  * Now available ?LeftHand OS version 10 software (formerly SAN/iQ) ?"one click" online upgrades, support for Windows 2012, Active Directory integration, proxy server support and quorum alerts.

• Question 3:

  A customer is migrating data to a storage array with 7 TB of storage capacity. They need 6 TB to be presented on this array for an existing database requirement.

  Which storage virtualization technology should this customer use to optimize the utilization of their available storage?

  A. block-level data compression
  B. primary storage deduplication
  C. virtual replication
  D. thin provisioning
  D. thin provisioning

  ---

  explanation:

  Thin provisioning promises higher capacity utilization rates and is a feature in most storage systems. But buyer beware--not all thin technologies are created equal. HP Converged Storage offers the most comprehensive and advanced set of thin technologies in the industry. With HP, your data center can be lean and efficient.

  With HP thin technologies, you can:

  *

  Start thin, so you can get the most from every dollar and disk. Easily utilize 80% or more of your purchased capacity with thin provisioning, which, unlike competitive offerings, does not require pre-planning or space reservations.

  *

  Cut storage capacity needs in half--guaranteed.1

  Changes IT refresh cycles by providing simple data mobility across clusters or generations of storage systems without downtime.

  *

  Expect high efficiency and high performance--not tradeoffs. With HP 3PAR StoreServ Storage, thin technologies are embedded in hardware, so you can run all of your workloads in a thin state and still have high performance.

  *

  Reclaim nearly 100% of unused space.

  HP's thin reclamation technology continually hunts down wasted space in fine-grained, 16k increments and returns that capacity to the system for use by other applications.

• Question 4:

  A small-business customer plans to implement an HP 3PAR StoreServ 7200.

  What must the customer consider regarding large, unexpected data growth?

  A. Additional controller nodes cannot be added to the HP StoreServ 7200.
  B. There are no HBA expansion slots in the HP StoreServ 7200.
  C. Adaptive Optimization suffers a performance impact with large data.
  D. The HP StoreServ 7200 configuration must have fewer than four drive chassis.
  A. Additional controller nodes cannot be added to the HP StoreServ 7200.

• Question 5:

  A customer provides their requirements for a storage solution.

  A consultant, using his experience and product knowledge, has designed a solution.

  He needs to verify that the storage design and licensing rules have been adhered to, and that the solution can be supported by HP. Which resource can provide this information?

  A. HP StorageWorks Sizing Tool
  B. HP ActiveAnswers
  C. HP Storage Solutions Design Guide
  D. HP SAN Design Validator
  A. HP StorageWorks Sizing Tool

  ---

  explanation:

  It is recommended that the HP StorageWorks Sizing Tool (http://www.hp.com/go/storageworks/sizer) is used to identify the product and WAN link requirements because the required bandwidth is complex.

• Question 6:

  A customer plans to implement an HP StoreVirtual 4000 Storage System.

  Which NICs can the customer use to enable adaptive load balancing after installation? (Select two.)

  A. three 10GbE
  B. one 10GbE
  C. one 1GbE
  D. two 10GbE
  E. two 1GbE
  F. three 1GbE
  D. two 10GbE
  E. two 1GbE

  ---

  explanation:

  

  Note:

  * Adaptive load balancing (ALB)

  Uses interfaces simultaneously for data transfer (receive and transmit load balancing). If one connection fails, the remaining connection continues without disruption to the storage nodes operation or iSCSI sessions. It offers the benefits of the

  increased transmission rates without additional switch configuration. Interfaces in an ALB bond may be connected to different switches and therefore supports switch failover.

• Question 7:

  What is the primary benefit of source-side deduplication compared to target-side deduplication?

  A. Source-side deduplication allows more data to be transferred over low-bandwidth links in the network.
  B. Source-side deduplication reduces the amount of data transferred between media servers and the D2D device.
  C. Source-side deduplication isolates data so that it can be more easily streamed to tape for offsite storage.
  D. Source-side deduplication allows more data to be stored on the D2D device.
  B. Source-side deduplication reduces the amount of data transferred between media servers and the D2D device.

  ---

  explanation:

  Reference: Dedupe 2.0: What HP Has In Store(Once)

• Question 8:

  A customer plans to migrate from a third-party legacy storage solution to an HP 3PAR StoreServ 7000. The customer needs to configure the storage system and the Service Processor.

  What is the minimum operating system version the customer needs to run the setup wizard?

  A. Windows Server 2003
  B. Red Hat Enterprise 6
  C. Windows Server 2012
  D. Windows Server 2008 R2
  D. Windows Server 2008 R2

  ---

  explanation:

  SmartStart Prerequisites

  

  Microsoft Windows 2008 R2 Server x64 Edition or 2012 is currently running in the system ?1.0 gigahertz or higher processor

  

  1 GB of installed RAM (2 GB recommended)

  

  CD-ROM or DVD-ROM drive

  

  1280 x 1024 or better screen resolution

  SmartStart Online Help is supported in the following browser versions:

  

  Microsoft Internet Explorer 8, 9 and 10

  

  Mozilla Firefox 14 through 21

  To launch HP 3PAR SmartStart:

  1.

  Insert the HP 3PAR SmartStart CD.

  2.

  Follow the onscreen instructions to complete the installation and launch the application. Continue on to "Launching the HP 3PAR Service Processor Setup Wizard" (page 53) and launch the setup wizard.

  Reference; HP 3PAR StoreServ 7000 Storage, Installation Guide

• Question 9:

  A customer is planning to migrate from an HP EVA to an HP 3PAR StoreServ 7000 Storage System The customer uses disk groups on the EVA for fine-grained database management.

  What can the customer use to achieve fine-grained database management on the HP 3PAR StoreServ 7000?

  A. logical volumes
  B. common provisioning groups
  C. disk groups
  D. virtual volumes
  B. common provisioning groups

  ---

  explanation:

  Terminology comparison between EVA and HP 3PAR StoreServ EVA P6000: Disk Group HP 3PAR StoreServ: Common Provisioning Group (CPG)

• Question 10:

  For how many days after installation is an Online Import license valid?

  A. 30
  B. 60
  C. 180
  D. 365
  C. 180

  ---

  explanation:

  There is a 180 day time based Peer motion shipped free, this license time starts at installation time, so if the license is enabled at the factory then it will start to tick down.

  The license will generate appropriate alerts once the 180 days is drawing close.

  Alternatively there is a permanent license too!