Microsoft 70-743 Online Practice Questions and Exam Preparation

Microsoft 70-743 Online Questions & Answers

• Question 71:

  You have a Windows Server 2016 failover cluster that contains two servers named Server1 and Server2.

  The Cluster Service on Server1 fails.

  You need to identify the cause of the failure.

  What should you do?

  A. From Event Viewer, review the Application event log.
  B. From Event Viewer, review the System event log.
  C. From Windows PowerShell, run the Get-ClusterLog cmdlet.
  D. From Windows PowerShell, run the Get-ClusterNode cmdlet.
  B. From Event Viewer, review the System event log.

• Question 72:

  You have a server named Server1 that runs Windows Server 2016.

  On Server1, you use the Basic template to create a new Data Collector Set named CollectorSet1.

  You need to configure CollectorSet1 to generate performance alerts.

  What should you do before you start CollectorSet1?

  A. Modify the performance counter data collector of CollectorSet1.
  B. Add a new data collector to CollectorSet1.
  C. Modify the configuration data collector of CollectorSet1.
  D. Add a new task to CollectorSet1.
  A. Modify the performance counter data collector of CollectorSet1.

  ---

  https://technet.microsoft.com/en-us/library/cc722414(v=ws.11).aspx

• Question 73:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions,

  while others might not have a correct solution.

  After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  You have a server named Server1 that runs Windows Server 2016. Server1 is configured as a VPN server. Server1 is configured to allow domain users to establish VPN connections from 06:00 to 18:00, every day of the week.

  You need to ensure that domain users can establish VPN connections only between Monday and Friday.

  Solution: From Network Policy Server, you modify the Network Policies on Server1.

  Does this meet the goal?

  A. Yes
  B. No
  A. Yes

• Question 74:

  HOTSPOT

  You have a virtual machine named VM1 that runs Windows Server 2016. VM1 is a Remote Desktop Services (RDS) server.

  You need to ensure that only TCP port 3389 can be used to connect to VM1 over the network.

  Which command should you run on the Hyper-V host? To answer, select the appropriate options in the answer area.

  Hot Area:

  

  

  ---

  PS C:\> Add-VMNetworkAdapterExtendedAcl -VMName "TSQA01" -Action Allow -Direction Inbound LocalPort "3389" -Protocol "TCP" -Weight 10 -Stateful $True This command creates a stateful inbound ACL that allows a remote device to connect to the virtual machine on port 3389, which is the port for Remote Desktop Protocol. References: https://technet.microsoft.com/en-us/library/dn464289.aspx https://docs.microsoft.com/en-us/powershell/module/hyper-v/add-vmnetworkadapterextendedacl?view=win10ps

• Question 75:

  HOTSPOT

  You have a server named Server1 that runs Windows Server 2016. Server1 has the Web Application Proxy role service installed.

  You plan to deploy Remote Desktop Gateway (RD Gateway) services. Clients will connect to the RD Gateway services by using various types of devices including Windows, iOS and Android devices.

  You need to publish the RD Gateway services through the Web Application Proxy.

  Which command should you run? To answer, select the appropriate options in the answer area.

  Hot Area:

  

  

  ---

  References:

  https://docs.microsoft.com/en-us/powershell/module/webapplicationproxy/add-webapplicationproxyapplication? view=win10-ps

• Question 76:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions,

  while others might not have a correct solution.

  After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  Your network contains an Active Directory forest named contoso.com. The forest contains a child domain named eu.contoso.com.

  You plan to implement live migration between two Hyper-V hosts that run Windows Server 2016. The hosts are configured as shown in the following table.

  

  You need to ensure that you can perform a live migration of VM1 from Host1 to Host2.

  Solution: You move Host2 to the contoso.com domain.

  Does this meet the goal?

  A. Yes
  B. No
  A. Yes

  ---

  To set up non-clustered hosts for live migration, you'll need:

  A user account with permission to perform the various steps.

  The Hyper-V role installed on the source and destination servers.

  Source and destination computers that either belong to the same Active Directory domain, or belong to domains that trust each other.

  The Hyper-V management tools installed on a computer running Windows Server 2016 or Windows 10, unless the tools are installed on the source or destination server and you'll run the tools from the server.

  Reference:

  https://docs.microsoft.com/en-us/windows-server/virtualization/hyper-v/deploy/set-up-hosts-for-live-migration-without-failover-clustering

• Question 77:

  You have a Windows Server 2016 failover cluster that contains two servers named Server1 and Server2.

  The Cluster Service on Server1 fails.

  You need to identify the cause of the failure.

  What should you do?

  A. From Windows PowerShell, run the Get-ClusterNode cmdlet
  B. From Windows PowerShell, run the Get-ClusterLog cmdlet
  C. From Event Viewer, review the Application event log
  D. From Event Viewer, review the System event log
  D. From Event Viewer, review the System event log

  ---

  Reference: https://docs.microsoft.com/en-us/windows-server/failover-clustering/system-events

• Question 78:

  You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 hosts a virtual machine named VM1 that runs Windows Server 2016.

  On VM1, Dynamic Memory is disabled, MAC spoofing is enabled for the virtual network adapter, and checkpoints are disabled.

  You need to ensure that you can install the Hyper-V server role on VM1.

  What should you do?

  A. Shut down VM1, run the Set-VMProcessor cmdlet, and then start VM1.
  B. Disable Hyper-V integration services for VM1, and then restart VM1.
  C. Configure VM1 to use standard checkpoints.
  D. Shut down VM1, enable Dynamic Memory on VM1, and then start VM1.
  A. Shut down VM1, run the Set-VMProcessor cmdlet, and then start VM1.

  ---

  References: https://docs.microsoft.com/en-us/powershell/module/hyper-v/set-vmprocessor?view=win10-ps

• Question 79:

  HOTSPOT

  You have a Hyper-V host named Server1 that runs Windows Server 2016.

  You deploy a virtual machine named VM1 to Server1. VM1 runs Windows Server 2016.

  You need to ensure that you can install the Hyper-V server role on VM1.

  Which command should you run? To answer, select the appropriate options in the answer area.

  Hot Area:

  

  

• Question 80:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than onecorrect solution, while others might not have a correct solution.

  After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  Your network contains an Active Directory forest.

  You install Windows Server 2016 on 10 virtual machines.

  You need to deploy the Web Server (IIS) server role identically to the virtual machines.

  Solution: You create a software installation package, and then you publish the package to the virtual machines by using a Group Policy object (GPO).

  Does this meet the goal?

  A. Yes
  B. No
  B. No