Microsoft 70-743 Online Practice Questions and Exam Preparation

Microsoft 70-743 Online Questions & Answers

• Question 231:

  Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2016.

  Each server has an operating system disk and four data disks. All of the disks are locally attached SATA disks. Each disk is a basic disk, is initialized as an MBR disk, and has a single NTFS volume.

  You plan to implement Storage Spaces Direct by using the data disks on Server1 and Server2.

  You need to prepare the data disks for the Storage Spaces Direct implementation.

  What should you do?

  A. Format the volumes on the data disks as exFAT.
  B. Initialize the data disks as GPT disks and create a ReFS volume on each disk.
  C. Convert the data disks to dynamic disks.
  D. Delete the volumes from the data disks.
  D. Delete the volumes from the data disks.

• Question 232:

  HOTSPOT

  Your network is configured as shown in the network diagram.

  

  Hot Area:

  

  

• Question 233:

  HOTSPOT

  You have a network policy server (NPS) server named NPS1. One network policy is enabled on NPS1. The policy is configured as shown in the following exhibit.

  

  Use the drop-down menus to select the answer choice that completes each statement based on the information in the graphic.

  Hot Area:

  

  

• Question 234:

  Server1 download update from Microsoft update.

  You have Server2 that must synchronize update from Server1.

  Have firewall separate between Server1 and Server2.

  Which port should to open on Server2 to synchronize?

  A. 80
  B. 443
  C. 3389
  D. 8530
  D. 8530

• Question 235:

  You have a Scale-Out File Server that has a share named Share1. Share1 contains a virtual disk file named Disk1.vhd.

  You plan to create a guest failover cluster.

  You need to ensure that you can use the virtual disk as a shared virtual disk for the guest failover cluster.

  Which cmdlet should you use?

  A. Set-VHD
  B. Optimize-VHDSet
  C. Optimize-VHD
  D. Convert-VHD
  D. Convert-VHD

• Question 236:

  DRAG DROP

  Your network contains an Active Directory forest. The forest contains an Active Directory Federation Services (AD FS) deployment.

  The AD FS deployment contains the following:

  An AD FS server named server1.contoso.com that runs Windows Server 2016

  1. A Web Application Proxy used to publish AD FS

  2. A UPN that uses the contoso.com suffix

  3. A namespace named adfs.contoso.com

  You create a Microsoft Office 365 tenant named contoso.onmicrosoft.com. You use Microsoft Azure Active Directory Connect (AD Connect) to synchronize all of the users and the UPNs from the contoso.com forest to Office 365.

  You need to configure federation between Office 365 and the on-premises deployment of Active Directory.

  Which three commands should you run in sequence from Server1? To answer, move the appropriate commands from the list of commands to the answer area and arrange them in the correct order.

  Select and Place:

  

  

• Question 237:

  You have a server named Served that runs Windows Server 2016.

  Server1 will be used as a VPN server.

  You need to configure Server1 to support VPN Reconnect.

  Which VPN protocol should you use?

  A. PPTP
  B. L2TP
  C. SSTP
  D. lKEv2
  D. lKEv2

  ---

  VPN reconnect enables Windows to reestablish a dropped VPN connection without requiring user intervention you must implement an IKEv2 VPN

  References: https://docs.microsoft.com/en-us/previous-versions/windows/it-pro/windows-7/dd637817(v=ws.10)

• Question 238:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions,

  while others might not have a correct solution.

  After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server 2016. All domain controllers run Windows Server 2012 R2.

  Contoso.com has the following configuration:

  

  You plan to deploy an Active Directory Federation Services (AD FS) farm on Server1 and to configure device registration.

  You need to configure Active Directory to support the planned deployment.

  Solution: You run adprep.exe from the Windows Server 2016 installation media.

  Does this meet the goal?

  A. Yes
  B. No
  A. Yes

  ---

  New installations of AD FS 2016 require the Active Directory 2016 schema (minimum version 85). You can upgrade the schema by running adprep.exe.

• Question 239:

  HOTSPOT

  You have a Windows Server 2016 failover cluster that contains two servers named Server1 and Server2.

  You need to apply patches to Server1.

  Which two commands should you run before you apply the patches? To answer, select the appropriate options in the answer area.

  Hot Area:

  

  

  ---

  References: https://support.microsoft.com/en-us/help/174799/how-to-update-windows-server-failover-clusters https://technet.microsoft.com/en-us/library/ee461003.aspx

• Question 240:

  You have a virtual machine named VM1 that runs Windows Server 2016. VM1 hosts a service that requires high network throughput.

  VM1 has a virtual network adapter that connects to a Hyper-V switch named vSwitch1. vSwitch1 has one network adapter. The network adapter supports Remote Direct Memory Access (RMDA), the Single Root I/O Virtualization (SR-IOV) interface, Quality of Service (QoS), and Receive Side Scaling (RSS).

  You need to ensure that the traffic from VM1 can be processed by multiple networking processors.

  Which Windows PowerShell command should you run on the host of VM1?

  A. Set-NetAdapterRss
  B. Set-NetAdapterRdma
  C. Set-NetAdapterSriov
  D. Set-NetAdapterQoS
  A. Set-NetAdapterRss

  ---

  Receive Side Scaling (RSS) helps improve network throughput by distributing the load of network I/O across multiple CPUs rather than using only one.

  The Set-NetAdapterRss cmdlet sets the receive side scaling (RSS) properties on a network adapter. RSS is a scalability technology that distributes the receive network traffic among multiple processors by hashing the header of the incoming packet. Without RSS Windows Server 2012/2016; network traffic is received on the first processor which can quickly reach full utilization limiting receive network throughput. Many properties can be configured using the parameters to optimize the performance of RSS. The selection of the processors to use for RSS is an important aspect of load balancing. Most of the parameters for this cmdlet help to determine the processors used by RSS.