Microsoft 70-743 Online Practice Questions and Exam Preparation

Microsoft 70-743 Online Questions & Answers

• Question 201:

  HOTSPOT

  You have a Hyper-V host named Server1 that runs Windows Server 2016 Datacenter. Server1 is activated.

  On Server1, you deploy a virtual machine named VM1 that has a Server Core installation of Windows Server 2016 Standard.

  You need to activate VM1 by using Automatic Virtual Machine Activation (AVMA).

  Which command should you run? To answer, select the appropriate options in the answer area.

  NOTE: Each correct selection is worth one point.

  Hot Area:

  

  

  ---

  Reference: https://docs.microsoft.com/en-us/windows-server/get-started-19/vm-activation-19

• Question 202:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.

  After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server 2016. All domain controllers run Windows Server 2012 R2.

  Contoso.com has the following configuration:

  

  You plan to deploy an Active Directory Federation Services (AD FS) farm on Server1 and to configure device registration.

  You need to configure Active Directory to support the planned deployment.

  Solution: You raise the forest functional level to Windows Server 2012 R2.

  Does this meet the goal?

  A. Yes
  B. No
  B. No

  ---

  For a Windows Server 2012 R2 AD FS server, this solution would work. However, new installations of AD FS 2016 require the Active Directory 2016 schema (minimum version 85).

  References: https://technet.microsoft.com/en-us/windows-server-docs/identity/ad-fs/operations/configure-device-based-conditional-access-on-premises https://docs.microsoft.com/en-gb/windows-server/identity/ad-fs/overview/ad-fs-requirements

• Question 203:

  Your network contains an Active Directory domain named contoso.com. The domain contains a Hyper-V host named Server1 that runs Windows Server 2016. Server1 hosts four virtual machines that are members of the domain. The virtual machines are configured as shown in the following table.

  

  Which virtual machine can you manage by using PowerShell Direct?

  A. only VM4
  B. only VM2
  C. VM1, VM2, and VM3
  D. VM1, VM2, and VM4
  D. VM1, VM2, and VM4

  ---

  Reference: https://docs.microsoft.com/en-us/windows-server/virtualization/hyper-v/manage/manage-windows-virtual-machines-with-powershell-direct

• Question 204:

  You have an Active Directory domain named contoso.com.

  The computers in contoso.com are installed by using Windows Deployment Services.

  You have a server named Server1 that runs Windows Server 2016. Server1 is a member of contoso.com. Server1 has the Hyper-V role installed. Virtual machines on Server1 are connected to an external switch named Switch1.

  You create a virtual machine named VM1 on Server1 by running the following cmdlets.

  

  You need to ensure that you can install the operating system on VM1 by using Windows Deployment Services. What should you do?

  A. Add a legacy network adapter to VM1.
  B. Modify the SwitchType parameter of Switch1.
  C. Modify the DefaultFlowMinimumBandwidthWeigth parameter of Switch1.
  D. Add a SCSI controller to VM1.
  A. Add a legacy network adapter to VM1.

  ---

  A legacy network adapter is required for PXE boot. Incorrect Answers:

  B: The switch is an External switch which is what is required.

• Question 205:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solution,

  while others might not have a correct solution.

  After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  You are a server administrator at a company named Contoso, Ltd.

  Contoso has a Windows Server 2016 Hyper-V environment configured as shown in the following table.

  

  All of the virtual switches are of the external type.

  You need to ensure that you can move virtual machines between the hosts without causing the virtual machines to disconnect from the network.

  Solution: You implement live migration by using Host1 and Host3.

  Does this meet the goal?

  A. Yes
  B. No
  A. Yes

  ---

  Live migration is a Hyper-V feature that allows you to transparently move running Virtual Machines from one Hyper-V host to another without perceived downtime.

  Common requirements for any form of live migration: Two (or more) servers running Hyper-V that:

  -Support hardware virtualization.

  -

  Use processors from the same manufacturer. For example, all AMD or all Intel.

  -

  Belong to either the same Active Directory domain, or to domains that trust each other.

  Virtual machines must be configured to use virtual hard disks or virtual Fibre Channel disks (no physical disks).

  Use of an isolated network, physically or through another networking technology such as VLANs, is recommended for live migration network traffic.

  References:

  https://docs.microsoft.com/en-us/previous-versions/windows/it-pro/windows-server-2012-R2-and-2012/hh831435(v=ws.11)

• Question 206:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions,

  while others might not have a correct solution.

  After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  Your network contains an Active Directory domain named contoso.com. The domain contains two domain controllers named DC1 and DC2.

  DC1 holds the RID master operations role.

  DC1 fails and cannot be repaired.

  You need to move the RID role to DC2.

  Solution: On DC2, you open the command prompt, run dsmgmt.exe, connect to DC2, and use the Seize RID master option.

  Does this meet the goal?

  A. Yes
  B. No
  B. No

  ---

  There are 3 ways of transferring FSMO roles:

  Using graphical user interface available on a DC or any server/workstation with Administrative Tools / Remote Server Administration Tools installed.

  Using the command-line tool called ntdsutil.

  Using the PowerShell cmdlet Move-ADDirectoryServerOperationMasterRole.

  References:

  http://kpytko.pl/active-directory-domain-services/transferring-fsmo-roles-from-gui/

  http://kpytko.pl/active-directory-domain-services/transferring-fsmo-roles-with-powershell/

  http://kpytko.pl/active-directory-domain-services/transferring-fsmo-roles-from-command-line/

• Question 207:

  You have a DNS server named Server1 that runs Windows Server 2016. Server1 has an Active Directory-integrated zone named adatum.com.

  All client computers run Windows 10.

  You recently encountered unexpected responses to DNS client queries in the adatum.com zone.

  You need to log all the records written to the zone.

  Which cmdlet should you run?

  A. Set-DnsServerDsSetting
  B. Add-DnsServerQueryResolutionPolicy
  C. Set-DnsServer
  D. Set-DnsServerDiagnostics
  D. Set-DnsServerDiagnostics

  ---

  Reference: https://docs.microsoft.com/en-us/powershell/module/dnsserver/set-dnsserverdiagnostics?view=win10-ps

• Question 208:

  You have a server named Server1 that runs Windows Server 2016.

  You need to install the DNS Server role on Server1.

  What should you run?

  A. the dnscmd.exe command
  B. the dns.exe command
  C. the Install-Package cmdlet
  D. the Enable-WindowsOptionalFeature cmdlet
  E. the setup.exe command
  F. the Add-WindowsPackage cmdlet
  D. the Enable-WindowsOptionalFeature cmdlet

  ---

  Enable-WindowsOptionalFeature -Online -FeatureName DNS-Server-Full-Role

  References: https://docs.microsoft.com/en-us/powershell/module/dism/enable-windowsoptionalfeature?view=win10-ps https://blogs.technet.microsoft.com/teamdhcp/2015/12/04/how-to-deploy-windows-dns-server-on-nano-server/

• Question 209:

  HOTSPOT

  You have a server named Server1 that runs Windows Server 2016. Server1 has the Web Application Proxy role service installed.

  You need to publish Microsoft Exchange Server 2013 services through the Web Application Proxy. The solution must use preauthentication whenever possible.

  How should you configure the preauthentication method for each service? To answer, select the appropriate options in the answer area.

  Hot Area:

  

  

  ---

  

  The following table describes the Exchange services that you can publish through Web Application Proxy and the supported preauthentication for these services: References: https://technet.microsoft.com/en-us/library/dn528827(v=ws.11).aspx

• Question 210:

  DRAG DROP

  You have a server named Server1 that runs Windows Server 2016.

  You need to deploy the first cluster node of a Network Controller cluster.

  Which four cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.

  Select and Place:

  

  

  ---

  Deploy Network Controller using Windows PowerShell 1.Install-WindowsFeature Install the Network Controller server role To install Network Controller by using Windows PowerShell, type the following commands at a Windows PowerShell prompt, and then press ENTER. Install-WindowsFeature -Name NetworkController –IncludeManagementTools 2.New-NetworkControllerNodeObject You can create a Network Controller cluster by creating a node object and then configuring the cluster. You need to create a node object for each computer or VM that is a member of the Network Controller cluster. To create a node object, type the following command at the Windows PowerShell command prompt, and then press ENTER. Ensure that you add values for each parameter that are appropriate for your deployment. New-NetworkControllerNodeObject –Name -Server -FaultDomain -RestInte 3.Install-NetworkControllerCluster To configure the cluster, type the following command at the Windows PowerShell command prompt, and then press ENTER. Ensure that you add values for each parameter that are appropriate for your deployment. Install-NetworkControllerCluster –Node –ClusterAuthentication … 4.Install-NetworkController To configure the Network Controller application, type the following command at the Windows PowerShell command prompt, and then press ENTER. Ensure that you add values for each parameter that are appropriate for your deployment. Install-NetworkController –Node –ClientAuthentication References: https://technet.microsoft.com/en-us/library/mt282165.aspx