Microsoft 70-662 Online Practice Questions and Exam Preparation

Microsoft 70-662 Online Questions & Answers

• Question 71:

  Your company has offices in New York, Tokyo, and London. Each office is configured as an Active Directory site. Each site contains one Hub Transport server.

  You need to apply a disclaimer to all of the email messages sent by all of the users.

  What is the minimum number of Hub Transport rules you should create?

  A. 1
  B. 2
  C. 3
  D. 9
  A. 1

  ---

  Transport Rule Replication

  Transport rules configured on Hub Transport servers are applied to all messages handled by the Hub Transport servers in the Exchange 2010 organization. When a transport rule is created or an existing transport rule is modified or deleted on one Hub Transport server, the change is replicated to all Active Directory domain controllers in the organization. All the Hub Transport servers in the organization then read the new configuration from the Active Directory servers and apply the new or modified transport rules. By replicating transport rules across the organization, Exchange 2010 enables you to apply a consistent set of rules across the organization.

  Reference: Understanding How Transport Rules Are Applied

• Question 72:

  Your network contains an Active Directory domain named contoso.com.

  The network contains a server named Server1 that runs Exchange Server 2010 Service Pack 1 (SP1).

  The Exchange organization contains 500 mailboxes. All of the mailboxes are stored on a mailbox database named DBI.

  You need to add an administrator named Admin1 to the Recipient Management role group. Admin1 must only be able to manage the Exchange recipients in an organizational unit named OU1.

  Which PowerShell cmdlet should you use first?

  A. Set-DistributionGroup
  B. New-ManagementScope
  C. New-ManagementRole
  D. Add-MailboxPermission
  E. New-RoleGroup
  F. New-EmailAddressPolicy
  G. New-RoleAssignmentPolicy
  H. New-MailboxAuditSearchUg
  I. Add-ADPermission
  J. Add-ManagementRoleEntry
  E. New-RoleGroup

  ---

  To add a mailbox to the Recipient Management role group, you actually have to start off with:

  Add-RoleGroupMember "Recipient Management" -Member Admin1 However, as mentioned in the question, this needs to be scoped to a single OU, and you wouldn't want to scope the default Receipient Management role group to one OU as

  it would affect all other mailboxes in that group. So, you would have to create a new role group that is scoped to a single OU and has all the same roles that are assigned to the Recipient Management role group, then put in Admin1 as the

  only Role Group Member.

  You can accomplish this as follows:

  New-RoleGroup -Name "Admin Recipient Management" -Roles "Distribution Groups", "Mail Enabled Public Folders", "Mail Recipient Creation", "Mail Recipients", "Message Tracking", "Migration", "Move Mailboxes", "Recipient Policies" Members Admin1 -RecipientOrganizationalUnitScope OU1

  Reference:

  http://technet.microsoft.com/en-us/library/dd638209.aspx (Use the Shell to create a role group with an OU scope)

  http://technet.microsoft.com/en-us/library/dd638181.aspx (EXAMPLE 2)

• Question 73:

  Your company has a main office and five branch offices. Each office is configured as a separate Active Directory site.

  You have an Exchange organization. All servers in the organization have Exchange Server 2010 Service Pack 1 (SP1) installed. The organization contains one Hub Transport server in each site and an Edge Transport server in the main office site.

  You add a disclaimer to all internal and external e-mail messages sent by users in the company. You discover that the e-mail messages sent from one of the branch offices do not include the disclaimer.

  You need to ensure that all e-mail messages include the disclaimer.

  What should you do?

  A. Force Active Directory replication on the branch office domain controllers
  B. Restart the Microsoft Exchange System Attendant.
  C. Modify the cache settings of the branch office Hub Transport servers.
  D. Export all transport rules from the Hub Transport server in the main office. Import the transport rules in the branch office Hub Transport server.
  A. Force Active Directory replication on the branch office domain controllers

  ---

  Replication of transport rules across an organization depends on Active Directory replication. Replication time between Active Directory domain controllers varies depending on the number of sites in the organization, slow links, and other factors outside the control of Exchange. When you configure transport rules in your organization, make sure that you consider replication delays. http://technet.microsoft.com/en-us/library/bb124703.aspx#TRR

• Question 74:

  Your network contains an Active Directory domain. The domain contains one site.

  You have an Exchange Server 2010 Service Pack 1 (SP1) organization that contains two Client Access servers, two Hub Transport servers, and three Mailbox servers. The mailbox servers are members of a database availability group (DAG) named DAG1.

  Some users report that they cannot access their mailbox by using Outlook Anywhere.

  You verify that the issue only occurs when the users connect to one of the Client Access servers. You need to identify the configuration error on the Client Access server.

  What should you run from the Exchange Management Shell?

  A. Get- SenderIDConfig
  B. Test- SenderId
  C. Get- MailboxDatabase
  D. Test- SmtpConnectivity
  E. Test- SystemHealth
  F. Test- AvailabilityService
  G. Retry-Queue
  H. Test- MailFlow
  I. Test- ReplicationHealth
  J. Test- WebServicesConnectivity
  J. Test- WebServicesConnectivity

• Question 75:

  You have an Exchange Server 2010 organization.

  You need to ensure that a user named User1 can access his mailbox by using only Outlook Web App.

  What should you do?

  A. Modify the mailbox features for User1.
  B. Enable and configure Outlook Anywhere.
  C. Create an Outlook Web App Mailbox policy.
  D. Remove the Autodiscover record from the DNS zone.
  A. Modify the mailbox features for User1.

• Question 76:

  Your network contains an Active Directory domain. The domain contains one site.

  You have an Exchange Server 2010 Service Pack 1 (SP1) organization that contains two Client Access servers, two Hub Transport servers, and three Mailbox servers. The mailbox servers are members of a database availability group (DAG) named DAG1.

  An administrator adds a sender policy framework (SPF) record for your company. You need to verify that the SPF record is configured correctly.

  What should you run from the Exchange Management Shell?

  A. Test-MailFlow
  B. Test-SenderId
  C. Test-ReplicationHealth
  D. checkdatabaseredundancy.psl
  E. Get-MailboxDataboxCopyStatus
  F. Get-SenderldConfig
  G. Test-SystemHealth
  H. Get-MailboxDatabase
  I. Test-SmtpConnectivity
  J. Test-MapiConnectivity
  B. Test-SenderId

• Question 77:

  You have an Exchange Server 2010 server that has a single mailbox database named DB1.

  You need to move the transaction log files of DB1.

  Which cmdlet should you run?

  A. Move-DatabasePath
  B. Move-Mailbox
  C. Set-ExchangeServer
  D. Set-MailboxDatabase
  A. Move-DatabasePath

  ---

  Reference:

  http://technet.microsoft.com/en-us/library/dd351168.aspx http://technet.microsoft.com/en-us/library/ bb124742.aspx

• Question 78:

  You have an Active Directory forest that contains a single Active Directory site. Your organization contains the Exchange Server 2010 servers shown in the following table:

  Server1 has the Hub Transport and Client Access server roles installed. Server2 has the Mailbox, Hub Transport and Client Access server roles installed. All clients connect to Server1 and Server2 from the Internet using IMAP4. You need to

  prevent some users from using IMAP4 to connect to their mailboxes on Server2.

  What should you do?

  A. Modify the IMAP4 retrieval settings on Server2.
  B. Disable the IMAP4 mailbox feature for the mailboxes on Server2.
  C. On Server1, configure Windows Firewall to block TCP port 25 and TCP port 110.
  D. On Server2, configure Windows Firewall to block TCP port 110 and TCP port 995.
  B. Disable the IMAP4 mailbox feature for the mailboxes on Server2.

• Question 79:

  You have an Exchange Server 2010 organization. You need to prevent users in the organization from changing passwords by using Outlook Web App. The solution must not prevent users from changing passwords by using Windows. What should you do?

  A. From the properties of the user accounts, configure the settings on the Account tab.
  B. From the properties of the mailboxes, configure the settings on the Mailbox Features tab.
  C. From the properties of the OWA virtual directory, configure the settings on the Segmentation tab.
  D. From the properties of the OWA virtual directory, configure the settings on the Authentication tab.
  C. From the properties of the OWA virtual directory, configure the settings on the Segmentation tab.

• Question 80:

  Your network contains an Exchange Server 2010 Service Pack 1 (SP1) organization named contoso.com. The organization contains two Edge Transport servers, two Hub Transport servers, two Client Access servers, and three Mailbox servers.

  You need to prevent users from sending a single email message to more than 500 recipients.

  What should you do?

  A. From the Exchange Management Shell, run the Set-TransportConfig cmdlet.
  B. From the Exchange Management Console (EMC), create a Hub Transport rule.
  C. From the Exchange Management Console (EMC), create an Edge Transport rule.
  D. From the Exchange Management Shell, run the Set-TransportServer cmdlet.
  A. From the Exchange Management Shell, run the Set-TransportConfig cmdlet.