Microsoft 70-662 Online Practice Questions and Exam Preparation

Microsoft 70-662 Online Questions & Answers

• Question 31:

  You work as the Enterprise Exchange Administrator at ABC.com. The ABC.com network consists of a domain named ABC.com. The ABC.com network has a client computer named ABC-WS662 that has Microsoft Windows 7 installed.

  How can you proceed with the deployment of management tools for Exchange 2010 on ABC- WS662?

  A. You should run the Test-ServiceHealth cmdlet.
  B. You should deploy Microsoft .NET Framework 3.5.1.
  C. You should run the ACLDIAG and the scanforfeature command.
  D. You should deploy Internet Information Services (IIS) 6.0 Management console.
  E. You should run the wuauclt.exe /detectnow command.
  B. You should deploy Microsoft .NET Framework 3.5.1.
  D. You should deploy Internet Information Services (IIS) 6.0 Management console.

• Question 32:

  You work as the Enterprise Exchange Administrator at ABC.com. ABC.com is using Microsoft Exchange Server 2003 as their messaging solution.

  You have added a new server to the network and deployed Exchange Server 2010 on it with the default settings.

  What command must be used to change the default email address policy?

  A. You must use setup /NewProvisionedServer.
  B. You must use lpsetupui.exe.
  C. You must use Set-EmailAddressPolicy.
  D. You must use Setup.com /AnswerFile:Exchange-All.xml.
  C. You must use Set-EmailAddressPolicy.

• Question 33:

  You have an Exchange Server 201O Service Pack 1 (SP1) organization named contoso.com. The organization contains two Client Access servers named CAS1 and CAS2. CAS1 and CAS2 are members of a Client Access array named

  casarray1.contoso.com.

  The hardware on CAS1 fails.

  You need to restore CAS1.

  You install Windows Server 2008 R2 on a new server named CAS1.

  What should you do next? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

  Select and Place:

  

  

  ---

  1. Reset the computer account of CAS1.

  2. Join CAS1 to contoso.com.

  3. From the Exchange Server 2010 SP1 installation files, run setup /m:recoverserver.

  Reference: http://technet.microsoft.com/en-us/library/dd876880.aspx

• Question 34:

  You have an Exchange organization. All servers in the organization have Exchange Server 2010 Service Pack 1 (SP1) installed. You need to ensure that each user who sends a meeting request to a room mailbox receives a custom message from the mailbox. What should you do from the properties of the mailbox?

  A. Enable the Resource Booking Attendant.
  B. Configure the Account settings.
  C. Configure the Mail Flow settings.
  D. Configure the Resource Policy settings.
  E. Configure the Mailbox Features settings.
  F. Configure the Resource Information settings.
  G. Configure the Resource In-Policy Requests settings.
  H. Configure the Resource Out-of-Policy Requests settings.
  F. Configure the Resource Information settings.

  ---

  Custom messages are configured in the Resource Information settings.

  

• Question 35:

  You have a hosted Exchange organization. All servers in the organization have Exchange Server 2010 Service Pack 1 (SP1) installed. You have a 3 mailbox servers in DAG, which command do you use to enable Datacenter Activation Coordination on exiting DAG. Which cmdlet should you use?

  A. Set-DatabaseAvailabilityGroup
  B. Get-DatabaseAvailabilityGroup
  C. New-DatabaseAvailabilityGroup
  D. Add-MailboxDatabaseCopy
  A. Set-DatabaseAvailabilityGroup

  ---

  Ans: Set-DatabaseAvailabilityGroup -Identity DAG2 -DatacenterActivationMode DagOnly

• Question 36:

  Your network contains an Exchange Server 2010 Service Pack 1 (SP1) Edge Transport server named Server1.

  You install a new Exchange Server 2010 SP1 Edge Transport server named Server2. You need to copy all of the Edge Transport configurations from Server1 to Server2.

  Which two actions should you perform on Server1? (Each correct answer presents part of the solution. Choose two.)

  A. Back up the system state.
  B. Run the ExportEdgeConfig.PS1 script.
  C. Run the Export-ExchangeCertificate cmdlet.
  D. Run the New-EdgeSyncServiceConfig cmdlet.
  E. Run the Export-TransportRuleCollection cmdlet.
  B. Run the ExportEdgeConfig.PS1 script.
  E. Run the Export-TransportRuleCollection cmdlet.

  ---

  ExportEdgeConfig.PS1

  You can use the provided Shell scripts to duplicate the configuration of a computer that has the Microsoft Exchange Server 2010 Edge Transport server role installed. This process is referred to as cloned configuration.

  Cloned configuration is the practice of deploying new Edge Transport servers based on the configuration information from a previously configured source server. The configuration information from the previously configured source server is

  copied and exported to an XML file, which is then imported to the target server.

  Edge Transport server configuration information is stored in Active Directory Lightweight Directory Services (AD LDS) and isn't replicated among multiple Edge Transport servers. By using cloned configuration, you can make sure that every

  Edge Transport server that's deployed in the perimeter network is operating by using the same configuration.

  Export-TransportRuleCollection

  Use the Export-TransportRuleCollection cmdlet to export a transport rule collection used by the Transport Rules agent on a computer running Microsoft Exchange Server 2010 that has the Hub Transport server role or the Edge Transport

  server role installed.

• Question 37:

  You install a new Exchange organization. All servers in the organization have Exchange Server 2010 Service Pack 1 (SP1) installed.

  Users report that they receive a large number of unsolicited commercial e-mail (UCE) messages.

  You need to reduce the amount of UCE messages that the users in the organization receive.

  What should you do?

  A. Run the set-transportserver -antispamagentsenabled $true command.
  B. Run the set-contentfilterconfig Enabled $true command.
  C. Run the Install-AntispamAgents.ps1 script.
  D. Run the AntispamCommon.ps1 script.
  C. Run the Install-AntispamAgents.ps1 script.

• Question 38:

  You have an Exchange organization named contoso.com. All servers in the organization have Exchange Server 2010 Service Pack 1 (SP1) installed. The organization contains a mail-enabled Domain Local group named Group1.

  Users from outside the organization report that all e-mail messages sent to [email protected] generate a non-delivery report (NDR).

  You need to ensure that users from outside the organization can successfully send e-mail to [email protected].

  What should you modify for Group1?

  A. the group type
  B. the mail flow settings
  C. the advanced settings
  D. the group scope
  B. the mail flow settings

  ---

  

• Question 39:

  You have an Exchange Server 2010 organization. Your network contains two Active Directory sites named Site1 and Site2. Each site contains five Mailbox servers.

  A Mailbox server named Server1 is in Site1. A Mailbox server named Server2 is in Site2.

  You have a public folder named Folder1 that is replicated to Server1 and Server2.

  Users in Site1 report that they cannot access Folder1 when Server1 is offline.

  You need to ensure that all users can access Folder1 if Server1 is offline.

  What should you do?

  A. Add Server1 to the public folder referrals for Site2.
  B. Add Server2 to the public folder referrals for Site1.
  C. Add Server1 and Server2 to a Client Access server array.
  D. Add Server1 and Server2 to a database availability group (DAG).
  B. Add Server2 to the public folder referrals for Site1.

• Question 40:

  You have an Exchange organization. All servers in the organization have Exchange Server 2010 SP1 installed.

  The organization contains a database availability group (DAG) named DAG1. DAG1 contains two Mailbox server named Server1 and Server2. Five databases are replicated in DAG1. You need to install Exchange rollup updates on Server1. The solution must not prevent users from accessing their mailboxes.

  What should you do first?

  A. run the Set-DatabaseAvailabilityGroup cmdlet, and then enable Datacenter Activation Coordination for DAG1.
  B. run the Set-MailboxDatabase cmdlet, and then configure all mailbox database copies as lagged copies.
  C. Run the Suspend-MailboxDatabaseCopy cmdlet, and then switch over all mailbox databases to Server2.
  D. run the Update-MailboxDatabaseCopy cmdlet, and then modify the mailbox database Activation preference.
  C. Run the Suspend-MailboxDatabaseCopy cmdlet, and then switch over all mailbox databases to Server2.

  ---

  In situations where you have a planned outage/maintenance window or if you perhaps need to seed a database, the first step is to suspend replication for the involved database(s). This can be done both via the Exchange Management

  Console (EMC) and the Exchange Management Shell (EMS). To do so via the EMC, you simply right-click on the respective database copy/copies and select suspend in the context menu.

  To do the same via the EMS, you can use the following command:

  Suspend-MailboxDatabaseCopy Identity MDB02\E14EX02

  http://www.msexchange.org/articles_tutorials/exchange-server-2010/high-availability- recovery/ uncoveringexchange-2010-database-availability-groups-dags-part4.html