Microsoft 70-662 Online Practice Questions and Exam Preparation

Microsoft 70-662 Online Questions & Answers

• Question 351:

  You have an Exchange Server 2010 Service Pack 1 (SP1) organization. The organization contains five servers. The servers are configured as shown in the following table.

  

  All users access their mailbox by using Microsoft Outlook 2010. You enable a litigation hold for a user named Used1.

  You need to identify the number of email messages in litigation hold for User1.

  Which cmdlet should you run?

  A. Test-MRSHealth
  B. Get-TransportServer
  C. Get-Message
  D. Test-ServiceHeaith
  E. Get-MailboxDatabase
  F. Get-MailboxStatJstics
  G. Get-MailboxFolderStatistics
  H. Test-MailFlow
  I. Test-OutlookWebServices
  J. Test-SmtpConnectivity
  G. Get-MailboxFolderStatistics

  ---

  Get-MailboxFolderStatistics -Identity "Soumya Singhi" -FolderScope RecoverableItems | Format-List http:// technet.microsoft.com/en-us/library/ff714343.aspx

• Question 352:

  You work as the Enterprise Exchange Administrator at ABC.com. ABC.com is using Microsoft Exchange Server 2010 as their messaging solution. How can you configure Outlook Web App (OWA) to block ABC.com employees changing passwords?

  A. You must use IP Block list.
  B. You must change the properties of the OWA virtual directory.
  C. You must use an Outlook Web App mailbox policy.
  D. You must set up recipient filtering.
  B. You must change the properties of the OWA virtual directory.

  ---

  This question is confusing as two answers are correct. If you wish to disable the changing of passwords through OWA for all domain users, then you would use the following command:

  Set-OwaVirtualDirectory -Identity -ChangePasswordEnabled $false However, if you wish to prevent certain users from changing their passwords through OWA, then you use the Segmentation tab of the OWA mailbox policy in the EMC. Or, alternatively, you could use the following command:

  New-OWAMailboxPolicy -Name 'OWA Mailbox Policy Name' | Set-OWAMailboxPolicy - ChangePasswordEnabled $false

  I have gone for the former answer as it does not specify that it should only be configured for certain individual users.

• Question 353:

  You have an Exchange Server 2010 organization. Your network contains an Edge Transport server named Edge1 and a Hub Transport server named Hub1. You configure EdgeSync synchronization between Hub1 and Edge1.

  A month later, you install a second Hub Transport server named Hub2 in the same Active Directory site.

  You need to ensure that Edge1 synchronizes information from Hub1 and Hub2.

  What should you do?

  A. Create a new subscription file and then import the new subscription file to Hub1 and Hub2.
  B. Remove the Edge Subscription from Edge1 and then run the ImportEdgeConfig.ps1 script on Hub2.
  C. Copy the subscription file from Hub1 to Hub2 and then run the New-EdgeSubscription cmdlet on Hub2.
  D. Move Hub2 to a separate Active Directory site. Create a new subscription file on Edge1 and then run the New-EdgeSubscription cmdlet on Hub2.
  A. Create a new subscription file and then import the new subscription file to Hub1 and Hub2.

  ---

  B is incorrect as the ImportEdgeConfig.ps1 script creates a clone of the Edge Transport server. C is incorrect as we need to create a new subscription file before we can copy it to Hub2. (If we use the old file, it won't work. There is a TTL of 24

  hours that would have expired by now). D is incorrect because Edge Transport servers can only be associated with one AD site at a time.

  Reference:

  http://technet.microsoft.com/en-us/library/aa997438 (there is a note about 3/4 down the article that mentions this as the correct step).

• Question 354:

  You have an Exchange Server 2010 Service Pack 1 (SP1) organization.

  You need to ensure that only a user named User1 can approve meeting requests sent to a resource mailbox named Meeting Room 1.

  Which property tab should you modify? To answer, select the appropriate tab in the answer area.

  Hot Area:

  

  

• Question 355:

  Your network contains an Active Directory domain named contoso.com. The network contains a server named Server1 that runs Exchange Server 2010 Service Pack 1 (SP1).

  The Exchange organization contains 500 mailboxes. All of the mailboxes are stored on a mailbox database named DB1.

  You need to provide an administrator named Admin1 with the ability to search for mailbox content in multiple mailboxes. Which Windows PowerShell cmdlet should you use?

  A. New-EmailAddressPolicy
  B. Set-Mailbox
  C. Add-ManagementRoleEntry
  D. New-ManagementScope
  E. New-ManagementRole
  F. Add-AOPermission
  G. New-ManagementRoleEntry
  H. Set-OistributionGroup
  I. Add-MailboxPermission
  J. New-RoleGroup
  K

  ---

  http://www.1ask2.com/Exchange2010/RBAC2/RBAC3.html

• Question 356:

  You have an Exchange Server 2010 Service Pack 1 (SP1) organization. The organization contains a Hub Transport server named Server1 and an Edge Transport server named Server2.

  All servers are configured to use an internal DNS server named DNS1 for host name resolution. You configure an Edge Subscription from Server1 to Server2.

  You need to ensure that the DNS server at the company's Internet service provider (ISP) is used to resolve the SMTP domains of the email messages sent to the Internet.

  What should you do?

  A. From the Exchange Management Shell, run the Set-TransportConfig cmdlet,
  B. From the Exchange Management Console (EMC), create a transport rule.
  C. From the Exchange Management Shell, run the Set-TransportServer cmdlet.
  D. From the Exchange Management Console (EMC), modify the properties of the remote domain.
  E. From the Exchange Management Console (EMC), disable the IP Block List feature.
  F. From the Exchange Management Console (EMC), modify the properties of the accepted domain.
  G. From the Exchange Management Shell, run the Set-TransportAgent cmdlet.
  H. From the Exchange Management Shell, run the Set-ReceiveConnector cmdlet.
  C. From the Exchange Management Shell, run the Set-TransportServer cmdlet.

• Question 357:

  You have a Hub Transport server named Server1 that runs Exchange Server 2010. All Exchange users use IMAP4 to retrieve email.

  You need to ensure that all users can send email using SMTP. Your solution must not require any modifications to the default connectors.

  What should you do?

  A. Configure IMAP4 clients to send email using TCP port 25.
  B. Configure IMAP4 clients to send email using TCP port 587.
  C. Create a new Send connector and configure the connector to use port 110.
  D. Create a new Send connector and configure the connector to use port 143
  B. Configure IMAP4 clients to send email using TCP port 587.

• Question 358:

  You have an Exchange organization named contoso.com. All servers in the organization have Exchange Server 2010 Service Pack 1 (SP1) installed. The organization contains a mail-enabled Domain Local group named Group1.

  Users from outside the organization report that all e-mail messages sent to [email protected] generate a non-delivery report (NDR).

  You need to ensure to [email protected].

  What should you modify for Group1?

  A. The Advanced settings
  B. The Group scope
  C. The Group type
  D. The mail flow settings
  D. The mail flow settings

• Question 359:

  You are the Exchange Administrator of the ABC Corporation's Exchange 2010 organization. You are concerned about the total size of items that are stored in a public folder named ExpenseReport. Which of the following techniques should you use to determine the size of items and the attachments in the public folder?

  

  A. Run the following script: Get-PublicFolderItemStatistics -Identity "\ExpenseReport\2009".
  B. Click on the Statistics tab in the properties of the public folder with the Public Folder Management Console.
  C. Use the MSExchangeIS Public object in System Monitor.
  D. Use the MSExchangeIS object in System Monitor.
  A. Run the following script: Get-PublicFolderItemStatistics -Identity "\ExpenseReport\2009".

• Question 360:

  An Organization 2010 has Servers 1 and 2 in a DAG with CAS, HT and Mailbox Server roles. All Microsoft Outlook users automatically connect to an available CAS if a single server or service fails. What should you do?

  A. Create a CAS array. Create a new DNS record and IP addresses of
  B. Deploy a Hardware Load Balancer. Create a DNS record for Virtual IP address of Load Balancer. Create and configure a CAS array.
  C. Install a Load Balancer feature on both servers
  D. Remove Server2 for the DAG.
  B. Deploy a Hardware Load Balancer. Create a DNS record for Virtual IP address of Load Balancer. Create and configure a CAS array.