Microsoft 70-412 Online Practice Questions and Exam Preparation

Microsoft 70-412 Online Questions & Answers

• Question 341:

  Your network contains an Active Directory forest named adatum.com. The forest contains a single domain. The domain contains four servers. The servers are configured as shown in the following table.

  

  You need to update the schema to support a domain controller that will run Windows Server 2012 R2. On which server should you run adprep.exe?

  A. Server1
  B. DC3
  C. DC2
  D. DC1
  B. DC3

  ---

  We must use the Windows Server 2008 R2 Server. Upgrade Domain Controllers to Windows Server 2012 R2 and Windows Server 2012 You can use adprep.exe on domain controllers that run 64-bit versions of Windows Server 2008 or Windows Server 2008 R2 to upgrade to Windows Server 2012. You cannot upgrade domain controllers that run Windows Server 2003 or 32

  bit versions of Windows Server 2008. To replace them, install domain controllers that run a later version of Windows Server in the domain, and then remove the domain controllers that Windows Server 2003.

  Reference:

  Upgrade Domain Controllers to Windows Server 2012 R2 and Windows Server 2012, Supported in-place upgrade paths.

  http://technet.microsoft.com/en-us/library/hh994618.aspx#BKMK_UpgradePaths

• Question 342:

  HOTSPOT

  You run Get-FSRMClassificationule and you receive the following output

  

  You have a file named file1 that is stored on drive D and has the following content "111000000000111111"

  You run the classification with all of the rules.

  Use the drop-down menus to select the answer choice that completes each statement.

  Hot Area:

  

  

• Question 343:

  HOTSPOT

  You have the following Microsoft Azure backup policy.

  

  Hot Area:

  

  

• Question 344:

  HOTSPOT

  Your network contains one Active Directory forest named contoso.com and one Active Directory forest named adatum.com. Each forest contains a single domain. You have the domain controllers configured as shown in the following table.

  

  You perform the following three actions:

  

  Create a user named User1 on DC3.

  

  Create a file named File1.txt in the SYSVOL folder on DC1.

  

  Create a Group Policy object (GPO) named GPO1 on DC1 and link GPO1 to Site2.

  You need to identify on which domain controller or controllers each object is stored. What should you identify? To answer, select the appropriate options in the answer area.

  Hot Area:

  

  

  ---

  * SYSVOL is simply a folder which resides on each and every domain controller within the domain. It contains the domains public files that need to be accessed by clients and kept synchronised between domain controllers. Here File1.text will be stored on both domain controllers in contoso.com (DC1 and DC2).

  * User1 will be stored on both domain controllers in adatum.com (DC3 and DC4), and on the global catalog server in contoso.com (DC1).

  * The global catalog is the set of all objects in an Active Directory Domain Services (AD DS) forest. A global catalog server is a domain controller that stores a full copy of all objects in the directory for its host domain and a partial, read-only copy of all objects for all other domains in the forest. Global catalog servers respond to global catalog queries. GPO1 will be stored on the global catalog servers in the forest (Dc1 and DC3)

  Reference: Understanding the Global Catalog https://technet.microsoft.com/en-us/library/cc730749.aspx

• Question 345:

  You have a server named Server1 that runs Windows Server 2012 R2.

  Server1 has 2 dual-core processors and 16 GB of RAM.

  You install the Hyper-V server role in Server1.

  You plan to create two virtual machines on Server1.

  You need to ensure that both virtual machines can use up to 8 GB of memory.

  The solution must ensure that both virtual machines can be started simultaneously.

  What should you configure on each virtual machine?

  A. Dynamic Memory
  B. NUMA topology
  C. Memory weight
  D. Resource Control
  A. Dynamic Memory

• Question 346:

  You have two servers named Server1 and Server2 that run Windows Server 2012 R2.

  You have a Microsoft Azure subscription that has two backup vaults named Vault1 and Vault2.

  Server1 is backed up to Vault1. The backup of Server1 contains a file named Data.db. Server2 is backed up to Vault2. You download vault credential files for Vault1 and Vault2.

  Server1 experiences a severe hardware failure and will not start.

  You need to recover a copy of Data.db to Server2.

  What should you do?

  A. From the Azure Management Portal, modify the policies of Vault1. On Server2, run the Recover Data Wizard.
  B. From Server2, modify the logon settings for the Microsoft Azure Recovery Services Agent service, and then run the Recover Data Wizard.
  C. From the Azure Management Portal, allow the re-registration of Server1. On Server2, modify the Microsoft Azure Backup properties, and then run the Recover Data Wizard.
  D. From Server2, copy the Vault1 credentials and the passphrase. Run the Recover data Wizard.
  E. From the Azure Management Portal, add the certificate of Server2 as a management certificate. On Server2, run the Recover Data Wizard.
  F. From Server1, run the Recover Data Wizard, and then click Another server. When the wizard completes, copy the files.
  G. From Server1, run the Recover Data Wizard, and then click This server. When the wizard completes, copy the files.
  H. From the Azure Management Portal, modify the configuration of Vault1. On Server2, run the Recover Data Wizard.
  D. From Server2, copy the Vault1 credentials and the passphrase. Run the Recover data Wizard.

  ---

  We need the Vault1 credentials to be able to access the data in Vault1.

  We need the passphrase of Server1 to access the backup that was made on Server1.

  References: Microsoft Azure - Cloud Backup and Recovery

  http://blogs.technet.com/b/rmurphy/archive/2014/12/02/microsoft-azure-backup.aspx

• Question 347:

  You have a server named Server1 that runs Windows Server 2012 R2.

  You start Server1 by using Windows RE.

  You need to repair the Boot Configuration Data (BCD) store on Server1.

  Which tool should you use?

  A. Bootim
  B. Bootsect
  C. Bootrec
  D. Bootcfg
  C. Bootrec

  ---

  How To Rebuild the BCD in Windows

  1.

  Start Advanced Startup Options if you're using Windows 8.

  2.

  Open Command Prompt from Advanced Startup Options or System Recovery Options menu.

  3.

  At the prompt, type the bootrec command as shown below and then press Enter:

  bootrec /rebuildbcd.

  The bootrec command will search for Windows installations not included in the Boot Configuration Data and then ask you if you'd like to add one or more to it.

  Incorrect Answers:

  B. Bootsect.exe updates the master boot code for hard disk partitions to switch between BOOTMGR and NTLDR. You can use this tool to restore the boot sector on your computer. This tool replaces FixFAT and FixNTFS.

  D. The bootcfg command is a Microsoft Windows Server 2003 utility that modifies the Boot.ini file.

  References: How to Rebuild the BCD in Windows

  http://pcsupport.about.com/od/fixtheproblem/ht/rebuild-bcd-store-windows.htm

• Question 348:

  HOTSPOT

  Your company has a main office and a branch office. An Active Directory site exists for each office. The network contains an Active Directory forest named contoso.com.

  The contoso.com domain contains three member servers named Server1, Server2, and Server3. All servers run Windows Server 2012 R2.

  n the main office, you configure Server1 as a file server that uses BranchCache. In the branch office, you configure Server2 and Server3 as BranchCache hosted cache servers.

  You are creating a Group Policy for the branch office site. In the branch office, you need to configure the client computers that run Windows B to use Server2 and Server3 as BranchCache.

  Hot Area:

  

  

  ---

  

  References: https://technet.microsoft.com/en-us/library/ee649153(v=ws.10).aspx http://blogs.technet.com/b/wsnetdoc/archive/2012/06/01/highlighting-branchcache-hosted-cache-mode-in-windows-server-2012.aspx

• Question 349:

  Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Active Directory Rights Management Services server role installed.

  The domain contains a domain local group named Group1.

  You create a rights policy template named Template1.

  You need to ensure that all the members of Group1 can use Template1.

  What should you do?

  A. Configure the email address attribute of Group1 and configure the email address attribute of all the users who are members of Group1.
  B. Convert the scope of Group1 to global and configure the email address attribute of Group1.
  C. Convert the scope of Group1 to universal and assign Group1 the rights to Template1.
  D. Configure the email address attribute of all the users who are members of Group1 and assign Group1 the rights to Template1.
  D. Configure the email address attribute of all the users who are members of Group1 and assign Group1 the rights to Template1.

  ---

  References: http://social.technet.microsoft.com/wiki/contents/articles/13130.ad-rms-troubleshooting-guide.aspx

• Question 350:

  Your network contains one Active Directory domain named contoso.com. The domain contains an IP Address Management (IPAM) server named Server1. Server1 manages several DHCP and DNS servers.

  From Server Manager on Server1, you create a custom role for IPAM.

  You need to assign the role to a group named IP_Admins.

  What should you do?

  A. From Windows PowerShell, run the Add-Member cmdlet.
  B. From Server Manager, create an access policy.
  C. From Windows PowerShell, run the Set-IpamConfiguration cmdlet.
  D. From Server Manager, create an access scope.
  B. From Server Manager, create an access policy.

  ---

  A role is a collection of IPAM operations. You can associate a role with a user or group in Windows using an access policy. Several built-in roles are provided, but you can also create customized roles to meet your business requirements.

  Reference: Manage IPAM, Access Control https://technet.microsoft.com/en-us/library/dn741281.aspx