Microsoft 70-412 Online Practice Questions and Exam Preparation

Microsoft 70-412 Online Questions & Answers

• Question 231:

  Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server 2012 R2.

  Server1 and Server2 have the Failover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1. Cluster1 has access to four physical disks. The disks are configured as shown in the following table.

  

  You need to ensure that all of the disks can be added to a Cluster Shared Volume (CSV). Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

  A. Format Disk2 to use NTFS.
  B. Format Disk3 to use NTFS.
  C. Enable BitLocker on Disk4.
  D. Disable BitLocker on Disk1.
  A. Format Disk2 to use NTFS.
  D. Disable BitLocker on Disk1.

  ---

  A. In Windows Server 2012 R2, a disk or storage space for a CSV volume must be a basic disk that is partitioned with NTFS or ReFS, but you cannot use a disk for a CSV that is formatted with FAT or FAT32.

  D. CSV supports bitlocker, but you would have to enable it on all nodes in the cluster. Therefore we need to disable bitlocker on Disk1. Incorrect Answers:

  B. ReFS would work fine. In Windows Server 2012 R2, a disk or storage space for a CSV volume must be a basic disk that is partitioned with NTFS or ReFS.

  C. Bitlocker must be enabled on all disks for it to work for a CSV.

  References: How to Configure BitLocker Encrypted Clustered Disks in Windows Server 2012 http://blogs.msdn.com/b/clustering/archive/2012/07/20/10332169.aspx

• Question 232:

  You have two Hyper A. Create a hidden share named LiveMig$ on Server2.
  B. Configure the Administration account on Server2 to use the same password.
  C. Add Server1 to a domain.
  D. Modify the Integration Services settings of VM1.

  C. Add Server1 to a domain.

  ---

  References: https://docs.microsoft.com/en-us/windows-server/virtualization/hyper-v/deploy/set-up-hosts-for-live-migration-without-failover-clustering

• Question 233:

  HOTSPOT

  You build a test environment. The test environment contains one Active Directory forest.

  The forest contains a single domain named contoso.com. The domain contains the servers configured as shown in the following table.

  

  You run the following commands. New-ADReplicationSite Site1 New-ADReplicationSite Site2 New-ADReplicationSubnet -Name “192.168.1.0/24” -Site Site1 New-ADReplicationSubnet -Name “192.168.2.0/24” -Site Site2 New-ADReplicationSiteLink -Name “SiteLink1” –SitesIncluded Site1,Site2 -Cost 100 - ReplicationFrequencyInMinutes 15 You promote Server3 and Server4 to domain controllers by using the default options. Use the drop-down menus to select the answer choice that completes each statement.

  Hot Area:

  

  

  ---

  * Replication will only occur between Server3 and Server4.

  * Values that can be transferred in one replication cycle (replication of the current set of updates between a source and destination domain controller): no limit.

  Reference: How the Active Directory Replication Model Works https://technet.microsoft.com/en-us/library/cc772726(v=ws.10).aspx#w2k3tr_repup_how_otmw

• Question 234:

  Which group policy item should you configure to enable automatic reenrollment of certificates?

  A. Certificate Path Validation Settings
  B. Certificate Services Client - Certificate Enrollment Policy
  C. Certificate Services Client - Auto-Enrollment
  D. Trusted Root Certification Authorities
  C. Certificate Services Client - Auto-Enrollment

• Question 235:

  You have a server named Server1 that runs Windows Server 2012 R2.

  You create a Data Collector Set (DCS) named DCS1.

  You need to configure DCS1 to log data to D:\logs.

  What should you do?

  A. Right-click DCS1 and click Data Manager...
  B. Right-click DCS1 and click SaveTemplate...
  C. Right-click DCS1 and click Properties.
  D. Right-click DCS1 and click Export list...
  C. Right-click DCS1 and click Properties.

  ---

  It is under the Directory tab from the DCS properties. http://technet.microsoft.com/en-us/library/cc749267.aspx

• Question 236:

  HOTSPOT

  Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. All servers run Windows Server 2012 R2.

  You install the DHCP Server server role on both servers.

  On Server1, you have the DHCP scope configured as shown in the exhibit. (Click the Exhibit button.)

  

  You need to configure the scope to be load-balanced across Server1 and Server2.

  What Windows PowerShell cmdlet should you run on Server1?

  To answer, select the appropriate options in the answer area.

  Hot Area:

  

  

  ---

  Add-DhcpServerv4Failover

  The Add-DhcpServerv4Failover cmdlet adds a new IPv4 failover relationship to a Dynamic Host Configuration Protocol (DHCP) server service.

  -PartnerServer

  Specifies the IPv4 address, or host name, of the partner DHCP server service with which the failover relationship is created.

  -ScopeId

  Specifies the scope identifiers, in IPv4 address format, which are to be added to the failover relationship.

  Example:

  

  Reference: Add-DhcpServerv4Failover

• Question 237:

  Your network contains an Active Directory domain named contoso.com.

  A previous administrator implemented a Proof of Concept installation of Active Directory Rights Management Services (AD RMS).

  After the proof of concept was complete, the Active Directory Rights Management Services server role was removed.

  You attempt to deploy AD RMS.

  During the configuration of AD RMS, you receive an error message indicating that an existing AD RMS Service Connection Point (SCP) was found.

  You need to remove the existing AD RMS SCP.

  Which tool should you use?

  A. Services
  B. Authorization Manager
  C. Active Directory Sites and Services
  D. TMP Management
  E. Active Directory Users and Computers
  F. Active Directory Domains and Trusts
  C. Active Directory Sites and Services

  ---

  References: https://kb.watchfulsoftware.com/pages/viewpage.action?pageId=1999181

• Question 238:

  You are employed as a network administrator at ABC.com Abc.com has an Active directory domain named ABC.com all servers on the ABC.com network have Windows Server 2012 R2.

  The ABC.com domain has two Active Directory sites configured.

  You want to make use of change notification configure replication between these Active Directory Sites.

  You have opened DEFAULTIPSITELINK Properties to configure the necessary attribute.

  Which of the following is the attribute that needs to be configured?

  A. The revision attribute
  B. The Options attribute
  C. The schedule attribute
  D. The proxyAddresses attribute
  B. The Options attribute

• Question 239:

  Your network contains an Active Directory domain named adatum.com. The domain contains a domain controller named DC1 that runs Windows Server 2012 R2. On Dc1, you open DNS Manager as shown in the exhibit. (Click the Exhibit button.)

  

  You need to change the zone type of the contoso.com zone from an Active Directory-integrated zone to a standard primary zone. What should you do before you change the zone type?

  A. Unsign the zone.
  B. Modify the Zone Signing Key (ZSK).
  C. Modify the Key Signing Key (KSK).
  D. Change the Key Master.
  A. Unsign the zone.

  ---

  A. Lock icon indicating that it is currently signed with DNSSEC, zone must be unsigned.

  

  Incorrect Answers:

  B. An authentication key that corresponds to a private key used to sign a zone.

  C. The KSK is an authentication key that corresponds to a private key used to sign one or more other signing keys for a given zone. Typically, the private key corresponding to a KSK will sign a ZSK, which in turn has a corresponding private key that will sign other zone data.

  References: https://technet.microsoft.com/en-us/library/hh831411.aspx https://technet.microsoft.com/en-us/library/ee649132(v=ws.10).aspx

• Question 240:

  Which of the following must you back up or have a copy of to be able to ensure that you can restore an AD RMS cluster in the event that a single server hosting all AD RMS components suffers complete data loss? (Choose three answers.)

  A. Cluster key password
  B. Trusted publishing domain
  C. Trusted user domain
  D. AD RMS databases
  A. Cluster key password
  B. Trusted publishing domain
  D. AD RMS databases