Cisco 648-238 Online Practice Questions and Exam Preparation

Cisco 648-238 Online Questions & Answers

• Question 21:

  Refer to the exhibit.

  

  You are the system administrator for a newly deployed Cisco Video Surveillance solution. To save time by not adding each camera individually, you decide to import Cisco IP cameras to the system using the Discover New Cameras method. However, cameras from the 192.168.1.x network are not showing up after the discovery process.

  What is causing the issue?

  A. The medianet is misconfigured.
  B. Discover New Cameras must be rerun for each network.
  C. A media server must be set up on the 192.168.1.x network prior to running Discover New Cameras.
  D. Discover New Cameras is working correctly. The cameras are in the Cameras Pending Approval list and must be enabled.
  C. A media server must be set up on the 192.168.1.x network prior to running Discover New Cameras.

• Question 22:

  Which option must be considered when calculating storage and retention on a Cisco Physical Security MSP server?

  A. number of cameras, frame rates, camera distances, record on motion requirements
  B. number of cameras, frame rates, server locations
  C. number of cameras, frame rates, compression types, record on motion requirements
  D. number of cameras, camera distances, server locations, compression types
  C. number of cameras, frame rates, compression types, record on motion requirements

• Question 23:

  Which of the following resources can provide a real-time view into the media server activity and state of operation?

  A. support-report
  B. httpd.access
  C. ims.log
  D. vsom_health.log
  C. ims.log

• Question 24:

  Which statement best describes the physical and virtualized Cisco VSM 7 platforms that Cisco recommends?

  A. Operations Manager must be deployed on a physical MSP server, media server can be deployed on physical MSP servers and/or as virtual machines on Cisco UCS.
  B. Media server must be deployed on physical MSP server(s), Operations Manager can be deployed on physical MSP or as a virtual machine on Cisco UCS servers.
  C. Cisco VSM deployments should be either on dedicated physical MSP servers or virtualized UCS servers, but not both.
  D. Cisco VSM is interchangeable and interoperable across physical MSP and virtualized Cisco UCS deployments and can be mixed without additional configurations.
  D. Cisco VSM is interchangeable and interoperable across physical MSP and virtualized Cisco UCS deployments and can be mixed without additional configurations.

• Question 25:

  Which switch port capability is recommended for an MSP server?

  A. Server switch ports should have 10/100 Mb capability
  B. Server switch ports should have 1000 Mb capability
  C. Server switch ports should have 10 Gb capability
  D. Servers should be connected to PoE-capable switches
  B. Server switch ports should have 1000 Mb capability

• Question 26:

  How are SNMP traps configured?

  A. SNMP traps can be added in the SNMP Trap Destinations section of VSMC
  B. SNMP traps are configured directly on the operating system
  C. SNMP traps are configured through VSOM, on the server network traps setup pages
  D. SNMP traps cannot be configured directly on the system, and a third-party application is needed
  A. SNMP traps can be added in the SNMP Trap Destinations section of VSMC

• Question 27:

  In a brand new Cisco VSM7 physical appliance, in which two instances should you need to use the Linux CLI? (Choose two.)

  A. Very rarely, or never
  B. Only when you need to upgrade the Cisco VSM server using RPM commands
  C. During initial setup of network settings
  D. Rarely; use YaST instead
  E. Only as needed when working with Cisco TAC
  A. Very rarely, or never
  E. Only as needed when working with Cisco TAC

• Question 28:

  The Cisco Physical Security CPS-MSP-1RU-K9 platform can support which configuration of option cards?

  A. 1 x CIVS-FC-1P
  B. 2 x CIVS-ENC-8P
  C. 2 x CIVS-ENC-16P
  D. 1 x CIVS-FC-1P and 1 x CIVS-ENC-8P
  A. 1 x CIVS-FC-1P

• Question 29:

  In VSM 6.3.2, what is the maximum number of video panes that can be displayed at any given time in the VSOM Operators View?

  A. 4
  B. 8
  C. 16
  D. 32
  C. 16

• Question 30:

  In Cisco VSM 7.0.1 (or higher), what is the maximum number of video panes that can be displayed at any given time in the VSOM Monitor Video tab?

  A. 1
  B. 4
  C. 16
  D. 32
  C. 16