Cisco 642-999 Online Practice Questions and Exam Preparation

Cisco 642-999 Online Questions & Answers

• Question 11:

  After an admin configures a service profile template and associates it to the blade, the admin notices that changes to the template are not automatically pushed to profiles that are inheriting that template. The service profile template and vNIC templates are set to "initial". Which two actions resolve this issue? (Choose two.)

  A. Delete the service profile template and re-create it as an updating template.
  B. Change the type of the service profile template from "initial" to "updating".
  C. Delete the vNIC template and re-create it as an updating template.
  D. Change the type of the vNIC template from "initial" to "updating".
  E. Delete and recreate all templates.
  A. Delete the service profile template and re-create it as an updating template.
  D. Change the type of the vNIC template from "initial" to "updating".

• Question 12:

  In the Create Dynamic vNIC Connection Policy dialog box, there is a configurable field titled Protection. What is the significance of the three choices for Protection?

  A. allows reserve vNICs to be allocated out of the spares pool
  B. enables hardware-based failover
  C. enables static binding of the VM port profile to dynamic vNICs
  D. selects the primary fabric association for dynamic vNICs
  E. allows dynamic vNICs to be reserved for fabric failover
  D. selects the primary fabric association for dynamic vNICs

• Question 13:

  Which four physical connections on a fabric interconnect are needed to perform the initial system setup for a cluster configuration? (Choose four.)

  A. Ethernet uplink ports connected to upstream switch
  B. console port connected to a computer terminal or console server.
  C. Layer 1 ports on both fabric interconnects connected to each other
  D. Layer 1 port of the first fabric interconnect connected to Layer 2 port of the second fabric interconnect
  E. Layer 2 ports on both fabric interconnects connected to each other
  F. Fibre Channel uplink ports connected to upstream fabric switch
  G. management Ethernet port (mgmt0) connected to external switch or router
  H. port channel to each fabric interconnect
  B. console port connected to a computer terminal or console server.
  C. Layer 1 ports on both fabric interconnects connected to each other
  E. Layer 2 ports on both fabric interconnects connected to each other
  G. management Ethernet port (mgmt0) connected to external switch or router

• Question 14:

  Refer to the exhibit.

  

  An admin is configuring VLANs on a Cisco UCS B-Series vNIC. Which two statements about the traffic coming from the operating system with this configuration are true? (Choose two.)

  A. The VLAN must be configured with ID 832 within the operating system.
  B. No VLAN tag should be added in the operating system.
  C. If traffic comes in untagged on this vNIC, it is placed in VLAN 832.
  D. This configuration is not supported when hypervisors are used.
  E. The uplink ports of the fabric interconnect have the native VLAN set to ID 832.
  B. No VLAN tag should be added in the operating system.
  C. If traffic comes in untagged on this vNIC, it is placed in VLAN 832.

• Question 15:

  Which four Cisco UCS components use the Cisco NX-OS syslog services to generate syslog entries for system information and alerts? (Choose four.)

  A. I/O module
  B. fabric interconnect
  C. chassis
  D. Cisco Integrated Management Controller
  E. Cisco UCS Manager
  F. adapter
  G. Ethernet uplink
  H. storage module
  A. I/O module
  D. Cisco Integrated Management Controller
  E. Cisco UCS Manager
  F. adapter

• Question 16:

  Which component is unsupported by the UEFI boot device in the Cisco UCS C-series standalone?

  A. FlexFlash card
  B. RAID array
  C. FCoE
  D. iSCSI
  E. USB
  F. PXE
  G. PCI SSD
  G. PCI SSD

• Question 17:

  Which network driver is required on a VMware ESXi 5.0 host for a vNIC to enter Cisco VM- FEX universal passthrough mode?

  A. VMXNET3
  B. Vlance
  C. Flexible
  D. E1000e
  E. VMXNET5
  A. VMXNET3

• Question 18:

  Which options are valid port types when configuring fixed 10-Gb LAN interfaces on the Cisco UCS 6200 Series Fabric Interconnects? (Choose three.)

  A. monitoring port
  B. server port
  C. uplink Ethernet port
  D. FEX port
  E. Fibre Channel storage port
  A. monitoring port
  B. server port
  C. uplink Ethernet port

• Question 19:

  

  Hot Area:

  

  

• Question 20:

  Which statement about high-availability clusters for Cisco UCS Fabric Interconnects is true?

  A. Peers in a cluster must connect to each other by using two 10-Gbps links.
  B. The cluster requires a minimum of two IP addresses.
  C. The management plane is active/standby.
  D. The data plane is active/standby.
  C. The management plane is active/standby.