Cisco 642-737 Online Practice Questions and Exam Preparation

Cisco 642-737 Online Questions & Answers

• Question 181:

  An engineer has found that many PCs on the network are still using Windows XP. What wireless security feature would be missing from the base operating system?

  A. WPA2
  B. WEP
  C. MFP
  D. CCXv5
  A. WPA2

• Question 182:

  When using the Microsoft WLAN AutoConfig feature, which 802.1X authentication method is not supported natively by Windows 7?

  A. EAP-TLS
  B. EAP-FAST
  C. PEAP with MS-CHAPv2 D. PEAP with GTC
  B. EAP-FAST

• Question 183:

  An engineer wants to configure guest access to redirect to a webpage and log in with provided credentials. Which configuration option on the WLAN is selected?

  A. authentication
  B. passthrough
  C. conditional web redirect
  D. splash page web redirect
  E. preauthentication ACL
  A. authentication

• Question 184:

  Which two situations permit the Cisco WCS v7.0 to successfully trace a rogue to a switch port? (Choose two.)

  A. The rogue is broadcasting an infrastructure SSID.
  B. The rogue has a client that is associated.
  C. The wired MAC address of the rogue is equal to or +1/-1 of the wireless MAC address of the rogue.
  D. The rogue is on the same switch as a CAPWAP AP.
  E. The rogue has been identified using RLDP.
  B. The rogue has a client that is associated.
  C. The wired MAC address of the rogue is equal to or +1/-1 of the wireless MAC address of the rogue.

• Question 185:

  Which group provides the complete set of options for user roles in an autonomous AP?

  A. Read-only
  B. Read-only and Read-write
  C. Read-only, Read-write, and Lobby-admin
  D. Read-only, Read-write, and Monitor
  E. Read-only, Read-write, and ALL
  F. Read-only, Read-write, Lobby-admin, and ALL
  B. Read-only and Read-write

• Question 186:

  A client is failing EAP authentication and a debug shows that the server is sending an Access-Reject message. Which action must you take to resolve authentication?

  A. Verify that the Validate server certificate on the client is disabled.
  B. Verify that the client certificates are from the proper CA and server certificate.
  C. Verify that the client server certificate has the proper Windows OIDs.
  D. Verify that the user is using the same password that is on the server.
  E. Verify that the user account is the same in the client certificate.
  D. Verify that the user is using the same password that is on the server.

• Question 187:

  What is the default security level that is used for syslog messages to a Cisco WLC v7.0- buffered log?

  A. Alerts
  B. Errors
  C. Warnings
  D. Notification
  E. Informational
  F. Disabled
  B. Errors

• Question 188:

  A wireless client has finished 802.1X and EAP using WPA2 with a controller-based AP network using a central AAA server. How is unicast encryption implemented on the client?

  A. The client uses the PMK that is sent from the AAA server that is derived from EAP authentication.
  B. The client uses the PTK that is sent from the WLC, which was derived from the PMK that is sent from the AAA server.
  C. The client uses the PTK that is derived from EAP authentication.
  D. The client uses the PMK that is derived from a four-way handshake with the AP.
  E. The client uses the PTK that is derived from a four-way handshake with the AP.
  E. The client uses the PTK that is derived from a four-way handshake with the AP.

• Question 189:

  What is the correct path in the Cisco WLC GUI to set up a lobby ambassador account?

  A. Security > AAA > Local Net Users
  B. Management > Guest Users List Page
  C. Management > Local Management Users
  D. Security > AAA > User Login Policies
  C. Management > Local Management Users

• Question 190:

  An engineer configures Locally Switched FlexConnect APs to perform 802.1x user authentication to a local Cisco ACS providing RADIUS authentication. Each AP is configured with the ACS's IP address, the port number on which the radius service is running, and the shared secret; however, valid users are failing to authenticate. What action will ensure that users can successfully authenticate with the local ACS/RADIUS?

  A. configure the APs for central switching
  B. configure the APs in ACS Authentication
  C. enable FlexConnect standalone mode
  D. configure hybrid reap groups on the WLC
  B. configure the APs in ACS Authentication