VMware 5V0-22.21 Online Practice Questions and Exam Preparation

VMware 5V0-22.21 Online Questions & Answers

• Question 1:

  During yesterday's business hours, a cache drive failed on one of the vSAN nodes. The administrator reached out to the manufacturer and received a replacement drive the following day. When the drive failed, vSAN started a resync to ensure the health of data, and all objects are showing a healthy and compliant state. The vSAN administrator needs to replace the failed cache drive.

  Which set of steps should the vSAN administrator take?

  A. Remove the existing vSAN disk group, and physically replace the device. Then, check to verify that the ESXi host automatically detects the new device. Afterwards, manually recreate the Disk Group.
  B. Physically replace the failed cache device, and vSAN will automatically create a new disk group. Then, remove the disk group with the failed device.
  C. Physically replace the failed cache device, and vSAN will automatically allocate the storage. Then, rebalance the cache layer.
  D. Place the disk group into maintenance mode, and select Full Data Migration. Then, physically replace the failed cache device. Afterwards, vSAN will rebuild the disk group automatically.
  B. Physically replace the failed cache device, and vSAN will automatically create a new disk group. Then, remove the disk group with the failed device.

• Question 2:

  A remote location was configured with Cloud Native Storage. When the administrator put the host in maintenance mode to perform monthly patching, the File Server Health check was triggered. Which action, if any, should the administrator take to resolve the issue?

  A. Click the Repair Objects Immediately button in the VMware Skyline Health Checks.
  B. Remove the host from maintenance mode, and put it back with Full Data Migration.
  C. It will resolve after 60 seconds, so no action is necessary.
  D. Modify the repair delay timer to 75.
  A. Click the Repair Objects Immediately button in the VMware Skyline Health Checks.

• Question 3:

  After a recent data loss event, the IT department plans to deploy a DR site using vSphere Replication with vSAN providing the storage backend.

  The architect would like to know how many components will be created based on the following configuration:

  2x 100 GB VMDK

  RAID 1 vSAN Storage Policy

  4x Point in Time snapshots

  How many components will be created?

  A. 32
  B. 24
  C. 16
  D. 8
  B. 24

• Question 4:

  A business unit requires proprietary data to be protected against a site failure while using the least amount of storage and the least amount of nodes. AN administrator plans to implement a vSAN Stretched Cluster with a RAID-5 policy. What is the minimum number of data nodes across all sites in this vSAN Stretched Cluster configuration?

  A. 4
  B. 8
  C. 12
  D. 6
  B. 8

• Question 5:

  Which solution can automate the deployment of a vSAN cluster as part of a full Software-Defined Datacenter?

  A. VMware Cloud Foundation
  B. vSphere Replication
  C. vRealize Suite Lifecycle Manager
  D. VMware Cloud Director
  A. VMware Cloud Foundation

• Question 6:

  A site administrator has determined that the site needs to upgrade all vSAN clusters to 7.0 U1. The vSAN administrator wishes to complete the update in the shortest amount of time possible. All virtual machines are assigned a storage policy where the "Failures to tolerate" is set to one or higher.

  Which strategy should be used to achieve this goal?

  A. Disable de-duplication and compression prior to the upgrade.
  B. Perform a complete update, omitting the on-disk format update.
  C. Select the "No data migration" maintenance mode option.
  D. Update only select, mission-critical clusters.
  D. Update only select, mission-critical clusters.

• Question 7:

  A vSAN administrator was presented with 30 additional vSAN ReadyNodes to add to an existing vSAN cluster. There is only one administrator to complete this task. What is the fastest approach?

  A. Use a Host Profile that was extracted from an existing host.
  B. Clone the ESXi boot partition to all new hosts, since the hardware is identical.
  C. Run vim-cmd to capture, and apply the configuration from an existing host.
  D. Launch Quickstart to Add Hosts to a vSAN Cluster
  D. Launch Quickstart to Add Hosts to a vSAN Cluster

• Question 8:

  What is the purpose of host rebuild reserve in vSAN?

  A. Reserves space in case of single host failure
  B. Allocated capacity for vCLS
  C. Reconfigures data components
  D. Stores vSphere HA heartbeats
  A. Reserves space in case of single host failure

• Question 9:

  Which tool should be used to identify vSAN unassociated objects?

  A. vSphere Host Client
  B. vSphere CLI
  C. vsantop
  D. PowerCLI
  B. vSphere CLI

• Question 10:

  Skyline Health vSAN HCL DB up-to-date health check is alerting in red in a newly deployed vCenter Server. Which two options are the possible solutions for this problem? (Choose two.)

  A. Obtain the HCL DB offline bundle from vmware.com, and manually update it.
  B. Upgrade to the latest version of vCenter.
  C. Upgrade the HCL DB from the hardware vendor website.
  D. Obtain the HCL DB from the hardware vendor, and manually update it.
  E. Update the HCL DB online from vmware.com.
  A. Obtain the HCL DB offline bundle from vmware.com, and manually update it.
  B. Upgrade to the latest version of vCenter.