Cisco 500-901 Online Practice Questions and Exam Preparation

Cisco 500-901 Online Questions & Answers

• Question 1:

  Which option is available for virtual switching in a VMware virtual environment?

  A. KVM virtual switch, distributed virtual switch, Cisco Nexus 100v
  B. Advanced virtual switch, distributed virtual switch, Cisco Nexus 100v
  C. Hypervisor virtual switch, distributed virtual switch, Cisco Nexus 100v
  D. Standard virtual switch, distributed virtual switch, Cisco Nexus 100v
  D. Standard virtual switch, distributed virtual switch, Cisco Nexus 100v

• Question 2:

  In the context of Cisco's unified Computing System, which three Cisco best practices are recommended when creating WWN pools? (Choose three.)

  A. All WWN must use "20" for the first octet
  B. Define a standard convention for WWNs agreed upon by all stakeholders for address blocks
  C. Select the default values presented by UCS Central
  D. Use Cisco's OUI (00:25:B5) for the 3rd to 5th octets in WWN
  E. Use the same hex value for 1st and 2nd octets in WWNN and WWPN
  F. Engage the security team to request WWNs
  A. All WWN must use "20" for the first octet
  D. Use Cisco's OUI (00:25:B5) for the 3rd to 5th octets in WWN
  E. Use the same hex value for 1st and 2nd octets in WWNN and WWPN

• Question 3:

  An application is running in a data center as a set of virtual machines running on a single physical host. The host is using an NPIV enabled HBA.

  What capability does this offer?

  A. Only the physical host can logically connect to the SAN fabric, thus enhancing security.
  B. The number of FlOGls is kept at a reasonable level, and therefore cannot saturate the SAN fabric.
  C. Inter VSAN traffic can be switched directly by the HBA.
  D. Each VM initiator can be managed independently, since it will generate its own FLOGl, and have its own pWWN.
  D. Each VM initiator can be managed independently, since it will generate its own FLOGl, and have its own pWWN.

• Question 4:

  A UCS admin needs to use the department Active Directory (AD) server for UCS user authorization. However, the AD administrator is reluctant to modify the AD schema, but is willing to add Group membership for UCS users.

  How is the UCS administrator expected to use AD?

  A. For user authorization but not for authentication.
  B. Use AD Schema User Extensions (AD/SUE) to do an on demand schema modification.
  C. Use the Group membership information to assign the authorization policy with LDAP Group Maps.
  D. Will not be able to use AD, must use the local UCS user database.
  B. Use AD Schema User Extensions (AD/SUE) to do an on demand schema modification.

• Question 5:

  What condition requires Inter VSAN Routing (IVR)?

  A. The targets are in the same Initiator Group.
  B. When the path between source and destination edge VSANs require the traffic to pass through several VSANs before reaching the destination.
  C. When using MDS 9000 series SAN Directors.
  D. Transit VSANs are integral to the IVR architecture and are always required.
  B. When the path between source and destination edge VSANs require the traffic to pass through several VSANs before reaching the destination.

• Question 6:

  Which additional three traffic egress controls may be enabled in Cisco UCS Manager depending upon the network adapter selected? (Choose three.)

  A. Rate
  B. Best Effort
  C. Host Control
  D. Peak
  E. Burst
  F. Smooth
  B. Best Effort
  C. Host Control
  E. Burst

• Question 7:

  Which is a gap of first generation hyperconverged solutions addressed by Cisco HyperFlex?

  A. Integrated networking configuration during deployment
  B. Support for GPUs
  C. Support for multiple hypervisors
  D. Integrated firewall for security monitoring
  A. Integrated networking configuration during deployment

• Question 8:

  Which statement is true regarding the Cisco UCS 6296UP Fabric Interconnect?

  A. Maximum number of Expansion slots: 3
  B. Form Factor: 2RU
  C. Maximum number of Ports: 96
  D. Requires UCS Performance Manager
  E. Supports 100GE
  C. Maximum number of Ports: 96

• Question 9:

  What is contained in Service Profiles?

  A. Management and server configurations
  B. Identity and state information for a logical server
  C. Application specific service requirements
  D. State information for a physical server
  B. Identity and state information for a logical server

• Question 10:

  Which three statements describes Service Profiles?

  A. Service Profiles define a standard convention for WWNs agreed upon by all stakeholders for address blocks
  B. Service Profiles use Cisco's OUI (00:25:B5) for the 3rd to 5th octets in WWN
  C. Service Profiles are only applicable to network configurations
  D. Service Profiles use the same hex value for 1st and 2nd octets in WWNN and WWPN
  E. Service Profiles are a logical view of a server without any tie to physical components
  F. Service Profiles are grouped by virtual machine operating system
  C. Service Profiles are only applicable to network configurations