Cisco 400-351 Online Practice Questions and Exam Preparation

Cisco 400-351 Online Questions & Answers

• Question 471:

  When configuration an autonoumous access point, which configuration broadcasts two SSIDs?

  A. dot11 ssid data1 vlan 10 authentication open authentication key-managerment wpa version 1 wpa-psk ascii cisco123 end ! dot11 ssid data2 vlan 11 authentication open authentication key-management wpa version 2 wps-psk accii Cisco12345 end
  B. dot11 ssid data1 vlan 10 authentication open authentication key-management wpa version 1 wpa-psk ascii cisco123 mbssid guest-mode end ! dot11 ssid data2 vlan 11 authentication open authentication key-management wpa version 2 wpa-psk accii Cisco12345 mbssid guest-mode end
  C. mbssid ! dot11 ssid data1 vlan 10 authentication open authentication key-management wpa version 1 wpa-psk ascii cisco123 end ! dot11 ssid data2 vlan 11 authentication open authentication key-management wpa version 2 wpa-psk accii Cisco12345 end
  D. dot11 ssid data1 vlan 10 authentication open authentication key-management wpa version 1 wpa-psk ascii cisco123 guest-mode end ! dot11 ssid data2 vlan 11 authentication open authentication key-management wpa version 2 wpa-psk ascii cisco12345 guest-mode end
  E. dot11 ssid data1 vlan 10 authentication open authentication key-management wpa version 1 wpa-psk ascii cisco123 mbssid end ! dot11 ssid data2 vlan 11 authentication open authentication key-management wpa version 2 wpa-psk accii Cisco12345 mbssid end
  B. dot11 ssid data1 vlan 10 authentication open authentication key-management wpa version 1 wpa-psk ascii cisco123 mbssid guest-mode end ! dot11 ssid data2 vlan 11 authentication open authentication key-management wpa version 2 wpa-psk accii Cisco12345 mbssid guest-mode end

• Question 472:

  DRAG DROP

  Drag and drop the descriptions from the left onto the correct MSE services or features on the right.

  Select and Place:

  

  

• Question 473:

  

  Refer to the exhibit, which is a configuration snippet of a Cisco 5760 controller code IOS XE 3.6.3. Which statement about wlan 11 is true?

  A. This configuration is for custom WebAuth with an external RADIUS server
  B. This configuration is for custom WebAuth with local authenticationC. This configuration is for WebAuth with an external RADIUS server
  C. This configuration is for WebAuth with local authentication
  D. This configuration is for external WebAuth with an external RADIUS server
  C. This configuration is for WebAuth with local authentication

• Question 474:

  You have been called onsite to troubleshoot a voice over wireless issue. Roaming within the indoor premises is working fine. However, when the customer roaming to the outdoor area, the call drops and the phone has to reauthenticate to the network. All indoor APs are model 3700, and the outdoor APs are 1500 series.

  Which two options are possible causes of this problem? (Choose two.)

  A. The phone gets the initial roaming channel list based on 802.11ax from the first connection, which includes only indoor channels 36 to 64. The outdoor channels are from 100 to 140.
  B. Deployment is in ETSI domain.
  C. The phone gets the initial roaming channel list based on 802.11d from the first connection, which includes only indoor channels 36 to 64. The outdoor channels are from 100 to 140.
  D. The SSID is operating on 2.4 Ghz.
  E. The phone gets the initial roaming channel list based on 802.11c from the first connection, which includes only indoor channels 36 to 64. The outdoor channels are from 100 to 140.
  A. The phone gets the initial roaming channel list based on 802.11ax from the first connection, which includes only indoor channels 36 to 64. The outdoor channels are from 100 to 140.
  D. The SSID is operating on 2.4 Ghz.

• Question 475:

  While configuring the root access point for WGB connectivity, the IT admin issues the no infrastructure client command. Which impact of this command is true?

  A. This command enables multi-VLAN support for the clients behind WGB.
  B. This command allows more than 20 WGBs to associate with the same access point.
  C. This command adds reliability to the multicast packet delivery from the access point to WGB.
  D. The SSID must be marked as infrastructure SSID when this command is in use or the WGB cannot connect.
  B. This command allows more than 20 WGBs to associate with the same access point.

• Question 476:

  Which command stops all CMX Services?

  A. service msed stop
  B. cmxctl stop
  C. stop service msed
  D. stop service cmxctl
  B. cmxctl stop

• Question 477:

  Which data rate mode allows the transmission of both unicast and multicast packets on a Cisco AP?

  A. disabled mode
  B. enabled mode
  C. mandatory mode
  D. multicast mode
  E. supported mode
  B. enabled mode

• Question 478:

  Which two statements about accessing the GUIand CLI of Cisco WlC are true? (choose two)

  A. The feature " Management using dynamic interface" can be configures in CLI only.
  B. The wireless client can access the Cisco WLC only when the option "Enable controller wireless Management to be accessible from Wireless clients is checked".
  C. Wired clients can have only eli access with the dynamic interface of the Cisco WLC while wireless clients have both CLI and GUI access with the dynamic interface when the feature management using dynamic interface is enabled .
  D. The feature management using dynamic interface can be applied to one of the dynamic interface only.
  B. The wireless client can access the Cisco WLC only when the option "Enable controller wireless Management to be accessible from Wireless clients is checked".
  D. The feature management using dynamic interface can be applied to one of the dynamic interface only.

• Question 479:

  You have just configured a test SSID for 802.1X authentication using EAP-PEAP on your wireless network. While checking the RADIUS server logs, you notice that a Windows 10 laptop using valid AD credentials fails to authenticate through the test WLAN.

  Which option is the issue?

  A. The Windows credentials are incorrect.
  B. The supplicant in the Windows 10 machine is configured to validate the server certificate, but the RootCA Certificate has not been installed on the laptop.
  C. The Windows 10 wireless supplicant does not support PEAP authentication. You must change the authentication to a method supported by the Windows 10 supplicant and the RADIUS server.
  D. The authentication packets are not reaching the RADIUS server, an inbound ACL on the firewall is blocking them.
  B. The supplicant in the Windows 10 machine is configured to validate the server certificate, but the RootCA Certificate has not been installed on the laptop.

• Question 480:

  Which option do you use to segment administrator rights by devices when using Cisco Prime Infrastructure?

  A. user roles
  B. user accounts
  C. virtual domains
  D. user groups
  D. user groups