Cisco 400-351 Online Practice Questions and Exam Preparation

Cisco 400-351 Online Questions & Answers

• Question 21:

  Which feature intersection of a Cisco 5760 Wireless LAN Controller with HA AP SSO is not true?

  A. Switchover during AP preimage download causes the Aps to start image download all over again from the new active controller.
  B. Upon guest anchor controller switchover, mobility tunnels stay active, Aps remain connected, clients rejoin at MA or MC, and clients are anchored on the new active controller.
  C. WIPS information is synced to the standby unit. The standby unit does not have to relean wIPS information upon switchover.
  D. Roamed clients that have their data path going through the mobility tunnel endpoint "becomed Local" in case of Layer 2 with sticky anchoring and Layer 3 roam. Layer 2 roamed clients are not affected except when roaming occurs between Cisco Unified Wireless Network and CA controller.
  C. WIPS information is synced to the standby unit. The standby unit does not have to relean wIPS information upon switchover.

• Question 22:

  Which option in the Cisco Identity Services Engine checks that the user authentication comes from a domain computer?

  A. It is not possible to validate the computer domain membership through ISE.
  B. Machine Access Restriction
  C. Machine Access Restriction
  D. Active Directory Attributes.
  E. An identity source sequence can be used to perform this check.
  C. Machine Access Restriction

• Question 23:

  Which two AP join process are supported by the cisco 5760 WLC ?(choose Two)

  A. Layer 2 CAPWAP discovery
  B. Remotely stored controller IP address discovery
  C. DNS discovery
  D. Layer 3 CAPWAP discovery
  C. DNS discovery
  D. Layer 3 CAPWAP discovery

• Question 24:

  In Cisco Prime, if managing software images for inventory devices, which two software image management processes are available for Cisco Unified WLCs? (Choose two.)

  A. image upgrade/distribution
  B. image upgrade analysis
  C. image import from protocol
  D. image import from device
  E. image recommendation
  A. image upgrade/distribution
  C. image import from protocol

• Question 25:

  You have added your Active Directory server to the Cisco ISE and see the status as operational. However, when you try to add Active Directory groups to your authorization policy conditions in the Cisco ISE, no Active Directory groups appear. What is the most likely reason?

  A. You did not add any attributes in the Active Directory join point under the External Identity Sources.
  B. A firewall is blocking TCP port 389 between the Cisco ISE and Active Directory.
  C. You did not add any groups in the Active Directory join point under the External Identity Sources.
  D. The credentials used to join the Cisco ISE to Active Directory do not have sufficient privileges to query Active Directory.
  C. You did not add any groups in the Active Directory join point under the External Identity Sources.

• Question 26:

  Which two statement are true about adding identity services engines 1.3 to prime infrastructure 2.2 ?(choose two)

  A. You need to use super user credential on ISE for PI integration to work.
  B. A maximum of three ISEs can be added to Pl.
  C. )lf you add two ISEs one should be primary and the other should be standby.
  D. configuration templates within PIcan be used to set up ISE.
  A. You need to use super user credential on ISE for PI integration to work.
  C. )lf you add two ISEs one should be primary and the other should be standby.

• Question 27:

  You are conducting a site survey for a customer that is about to deploy Cisco wireless phones.

  Which three recommendations apply? (Choose three.)

  A. Minimum SNR should be 15 dB.
  B. The minimum recommended wireless signal strength for voice applications is -71 dBm.
  C. Minimum SNR should be 25 dB.
  D. Wireless cell overlap should be 20 percent.
  E. Minimum SNR should be 35 dB.
  F. The minimum recommended wireless signal strength for voice applications is -57 dBm.
  G. Wireless cell overlap should be 10 percent.
  H. The minimum recommended wireless signal strength for voice applications is -67 dBm.
  A. Minimum SNR should be 15 dB.
  D. Wireless cell overlap should be 20 percent.
  F. The minimum recommended wireless signal strength for voice applications is -57 dBm.

• Question 28:

  RX-SOP is configured for the -80 dBm for 2 4 GHz radio with the value set as Low Threshold. Which two values represent the threshold values for each band? (Choose two)

  A. -82 dBm for 2 4 GHz
  B. -85 dBm for 2 4 GHz
  C. -80 dBm for 5 GHz
  D. -82 dBm for 5 GHz
  E. -85 dBm for 5 GHz
  B. -85 dBm for 2 4 GHz
  C. -80 dBm for 5 GHz

• Question 29:

  DRAG DROP

  Drag and drop the Cisco MSE context-aware solution problem on the left to the possible reason for the failure on the right.

  Select and Place:

  

  

• Question 30:

  You have configured VideoStream on a Cisco WLC and users are now viewing the company video broadcast over the wireless network. How can you verify you have VideoStream configured and working in the Cisco WLC GUI?

  A. The Multicast Status shows "Normal Multicast" in the Multicast Group Details.
  B. The Multicast Status shows "MediaStream Ongoing" in the Client detail page.
  C. The Multicast Status shows "Multicast-direct Allowed" in the Multicast Group Details.
  D. The Multicast Status shows "MediaStream Allowed" in the Multicast Group Details.
  C. The Multicast Status shows "Multicast-direct Allowed" in the Multicast Group Details.