1. Home
  2. Cisco
  3. 351-001

Cisco 351-001 Online Practice Questions and Exam Preparation

351-001 Exam Details

  • Exam Code
    :351-001
  • Exam Name
    :CCIE Routing and Switching Written
  • Certification
    :Cisco Certifications
  • Vendor
    :Cisco
  • Total Questions
    :996 Q&As
  • Last Updated
    :Dec 06, 2021

Cisco 351-001 Online Questions & Answers

  • Question 371:

    Refer to the exhibit.

    The VLAN-to-MST mapping is shown. (Assume SW1 acts as root for all possible MST instances.) spanning-tree mst configuration name MST revision 2 instance 0 vlan 1-200,301-4094 instance 1 vlan 201-300 ! If this topology is deployed, which action is required for traffic to flow on VLAN 200 and 300?

    A. Map VLAN 300 to instance 0.
    B. Map VLAN 200 to instance 2.
    C. Move instance 0 root to SW2.
    D. Move instance 1 root to SW2.
    E. Map both VLANs to instance 2.

  • Question 372:

    Which two statements about the metric-style wide statement as it applies to route redistribution are true? (Choose two.)

    A. It is used in IS-IS.
    B. It is used in OSPF.
    C. It is used in EIGRP.
    D. It is used for accepting TLV.
    E. It is used in PIM for accepting mroutes.
    F. It is used for accepting external routes.

  • Question 373:

    Where must the spanning-tree timers be configured if they are not using the default timers?

    A. They must be on the root bridge.
    B. They must be on any non-root bridge.
    C. Changing the default timers is not allowed.
    D. Timers must be modified manually on each switch.

  • Question 374:

    Refer to the exhibit.

    Switch DSW1 should share the same MST region with switch DSW2. Which statement is true?

    A. Configure DSW1 with the same version number, and VLAN-to-instance mapping as shown on DSW2.
    B. Configure DSW1 with the same region name, number, and VLAN-to-instance mapping as shown on DSW2.
    C. DSW2 uses the VTP server mode to automatically propagate the MST configuration to DSW1.
    D. DSW1 is in VTP client mode with a lower configuration revision number, therefore, it automatically inherits MST configuration from DSW2.
    E. DSW1 automatically inherits MST configuration from DSW2 because they have the same domain name.

  • Question 375:

    DRAG DROP

    Drag and drop each DHCP term on the left to the corresponding definition on the right.

    Select and Place:

  • Question 376:

    Refer to the exhibit.

    Which option explains why the forwarding address is set to 0.0.0.0 instead of 110.100.1.1?

    A. The interface Ethernet0/1 is in down state.
    B. The next-hop ip address 110.100.1.1 is not directly attached to the redistributing router.
    C. The next-hop interface (Ethernet0/1) is specified as part of the static route command; therefore, the forwarding address is always set to 0.0.0.0.
    D. OSPF is not enabled on the interface Ethernet0/1.

  • Question 377:

    Refer to the exhibit.

    Which option is the result of this configuration?

    A. All SNMP traffic coming into the router is redirected to interface GigabitEthernet1/0.
    B. All SNMP traffic generated from the router is redirected to interface GigabitEthernet1/0.
    C. All SMTP traffic generated from the router is redirected to interface GigabitEthernet1/0.
    D. All POP3 traffic coming into the router is redirected to interface GigabitEthernet1/0.
    E. All SMTP traffic coming into the router is redirected to interface GigabitEthernet1/0.

  • Question 378:

    Refer to the exhibit.

    R1, R2, and R3 in different satellite offices of the same organization, which sources multicast video streams from R1. R3 frequently receives video streams intended for R2. These streams saturate the available bandwidth of R3. Which configuration change can alleviate the congestion on R3?

    A. Enable IGMP snooping on all switches that connect to R1,R2 and R3
    B. Place a PIM filter on the switch and interface that connect to R1 only
    C. Configure IGMP snooping on R1, R2 and R3
    D. Place a PIM filter on the switches and interfaces that connect to R1, R2 and R3
    E. Configure R3 to send an immediate-leave message when necessary to stop receiving unwanted traffic
    F. Enable PIM snooping on all switches that connect to R1, R2 and R3

  • Question 379:

    Which configuration sets a minimum quality of service on a Layer 2 access switch?

    A. mls qos cos override mls qos cos 2
    B. mls qos cos 2
    C. mls qos trust cos mls qos cos 2
    D. mls qos trust cos
    E. mls qos trust dscp

  • Question 380:

    DRAG DROP

    Drag and drop the OSPFv3 LSA type on the left to the functionality it provides on the right.

    Select and Place:

Related Exams:

Tips on How to Prepare for the Exams

Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Cisco exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your 351-001 exam preparations and Cisco certification application, do not hesitate to visit our Vcedump.com to find your solutions here.