Cisco 350-801 Online Practice Questions and Exam Preparation

Cisco 350-801 Online Questions & Answers

• Question 471:

  Which Cisco Unity Connection function allows the system to answer a call, present a menu of options, and route callers based on their selection?

  A. Interview handler
  B. Call handler
  C. Mailbox store
  D. MWI policy
  B. Call handler

  ---

  Explanation

  Call handler is correct because it answers calls and provides menu-driven routing behavior for callers. An interview handler is used to ask questions and record responses, while mailbox store and MWI policy do not provide caller menu routing.

• Question 472:

  Which Cisco Unified CM service is installed by default and authenticates certificates on behalf of IP phones and other endpoints?

  A. Cisco CTL Provider
  B. Cisco Certificate Authority Proxy Function
  C. Cisco Trust Verification
  D. Cisco CallManager
  E. Cisco TFTP
  C. Cisco Trust Verification

• Question 473:

  Refer to the exhibit.

  

  An administrator must replace the T1 card with an E1 card.

  What is the correct configuration if the administrator was asked to configure 12 time slots?

  

  A. Option A
  B. Option B
  C. Option C
  D. Option D
  A. Option A

• Question 474:

  DRAG DROP

  An engineer must configure a SIP integration between cisco UCM and cisco Unity Connection. These components are configured already:

  1. SIP trunk security profile

  2. SIP profile

  3. SIP trunk

  Drag and drop the components from the left into the order they must be configured on the right.

  Select and Place:

  

  

• Question 475:

  An administrator is troubleshooting an issue where an 8845 is not joining the correct voice VLAN configuration from a switch and they believe that LLDP is the issue.

  Which command allows the administrator to see the packets sent from the phone to the switch?

  A. show lldp status <interface>
  B. show lldp traffic
  C. show lldp
  D. show lldp run
  B. show lldp traffic

  ---

  Explanation

  https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/12-2_37_ey/configuration/guide/scg/swlldp.pdf

• Question 476:

  An engineer configures a new phone in Cisco UCM. The phone boots and gets IP address when it connects to the network, however the phone fails to register with CISCO UCM. The engineer observes that the phone has a status Rejected in CISCO UCM.

  What must be verified first when troubleshooting the issue?

  A. whether auto-registration is enabled in Cisco UCM
  B. whether the Initial Trust List and Certificate Trust List files on the phone are correct
  C. whether the phone is in the correct VLAN
  D. whether the phone's MAC address is correct in Cisco UCM
  B. whether the Initial Trust List and Certificate Trust List files on the phone are correct

• Question 477:

  What is a capability of the call forwarding feature in a Cisco Webex dial plan?

  A. It forwards calls when a line is busy by enabling the call waiting feature.
  B. It forwards calls to the voicemail of a mobile phone when there is no answer.
  C. It provides the ability to forward a Webex meeting to another user.
  D. It chooses a tone to be played when forwarding all calls.
  D. It chooses a tone to be played when forwarding all calls.

• Question 478:

  Refer to the exhibit.

  

  A collaboration engineer needs to replace the original, single NTP server that was configured during the initial install of a Cisco UCM server.

  What is the first step to accomplish this task?

  A. Stop the NTP service on Cisco UCM.
  B. Enable NTP authentication for the new NTP server on Cisco UCM.
  C. Restart the NTP service on Cisco UCM.
  D. Delete the original NTP server from Cisco UCM.
  A. Stop the NTP service on Cisco UCM.

  ---

  Explanation

  In Cisco Unified Communications Manager (CUCM), the NTP server configured during installation is critical and cannot be modified while the NTP service is actively running.

  A. Stop the NTP service on Cisco UCM - CORRECT The first required step is to stop the NTP service. CUCM does not allow modification or removal of the configured NTP server while the service is running. Stopping the service unlocks the configuration so changes can be made.

  D. Delete the original NTP server from Cisco UCM - INCORRECT This is a necessary step, but it can only be performed after stopping the NTP service.

  C. Restart the NTP service on Cisco UCM - INCORRECT Restarting occurs after the new NTP server has been configured, not at the beginning.

  B. Enable NTP authentication for the new NTP server on Cisco UCM - INCORRECT This is optional and not required for replacing the NTP server, nor is it the first step. Conclusion: The correct first step is to stop the NTP service before making any changes to the NTP configuration.

• Question 479:

  Refer to the exhibit.

  

  What is the result of applying these two rules to a voice translation-profile for use with an ISDT1 PRI on a Cisco Voice gateway?

  A. The ISDN Type is modified to the administrators defined value.
  B. The ISDN Plan is modified to the administrators defined value.
  C. The leading Plus is stripped from the numeric phone number.
  D. Any Zero is stripped from the numeric phone number.
  A. The ISDN Type is modified to the administrators defined value.

• Question 480:

  Refer to the exhibit.

  

  An engineer verifies the configured of an MGCP gateway. The commands are already configured.

  Which command is necessary to enable MGCP?

  A. Device(config)# mgcp enable
  B. Device(config)# ccm-manager enable
  C. Device (config) # com-manager active
  D. Device (config)# mgcp
  D. Device (config)# mgcp

  ---

  Explanation

  https://www.cisco.com/c/en/us/support/docs/voice/media-gateway-control-protocol-mgcp/214635-configure-and-troubleshoot-mgcp-gateways.html