Cisco CCNP 300-610 Questions & Answers

• Question 61:

  A SAN fabric is built between a pair of Cisco MDS 9000 Series Switches. The requirement is for the ISL to use the VSAN ID to toward traffic from multiple VSANs across the same physical link. Additionally, the Fibre Channel trace feature must be supported.

  Which ISL interface parameters are required to meet these requirements?

  A. switchport mode TE switchport mode trunk vsan

  B. switchport mode TE switchport mode trunk

  C. switchport mode E switchport mode trunk vsan

  D. switchport mode E switchport mode trunk

  Correct Answer: B

• Question 62:

  An engineer must connect a Cisco UCS B-Series based system to an existing large storage area network fabric. The deployment must support hardware-based load balancing, prevent Fibre Channel domain ID exhaustion, and enable all blade servers to be in the same VSAN.

  Which set of actions meets the requirements?

  A. Enable Fibre Channel end-host mode on the fabric interconnect and NPIV mode on the SAN switch. Create an F Port channel that faces the fabric interconnect.

  B. Connect the fabric interconnect to the E Ports on the SAN switch. Create a SAN port channel.

  C. Configure Ethernet end-host automatic load balancing on the fabric interconnect. Set NL port mode on the SAN switch.

  D. Place all interfaces that face the fabric interconnects in the same VSAN. Disable zoning for the VSAN.

  Correct Answer: A

• Question 63:

  Which element is the main functional component of the architecture that separates the internal fabric and the external network that connects sites when VXLAN EVPN is deployed multisite?

  A. border leaf

  B. service leaf

  C. border gateway

  D. service gateway

  Correct Answer: C

  The main functional component of the EVPN Multi-Site architecture is the border gateway, or BGW. BGWs separate the fabric-side (site-internal fabric) from the network that interconnects the sites (site-external DCI) and mask the site-internal VTEPs. link:https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/white-paper-c11-739942.html

• Question 64:

  A network engineer must create a Fibre Channel fabric QoS design for an existing data center. The solution must provide relative bandwidth guarantees to application traffic, control latency, and prioritize application traffic.

  Which mechanism must be deployed to support these requirements?

  A. traffic policing

  B. traffic shaping

  C. traffic remarking

  D. traffic classification

  Correct Answer: B

• Question 65:

  An engineer must implement a WWPN pool for the vHBA template inside the Cisco UCS Manager. The template is used to connect a Cisco UCS B-Series blade to an external storage array.

  Which addressing sequence accomplishes this goal?

  A. from 20:00:00:00:00:00:00:00 to 20:FF:FF:FF:FF:FF:FF:FF

  B. from 192. 168.1.1 to 192.168.1.254

  C. from iqn.2020-c41i4p21y5a165.lab.ucs-00 to iqn.2020-ceiD1pj5y135-8.lab.ucs-FF

  D. from 00:0A:E6:3E:00:00 to 00:0A:E6:3E:00:FF

  Correct Answer: A

• Question 66:

  A company must introduce a scalable network automation tool to deploy, configure, and manage thousands of network device and service. The company servers already have been security-hardened and must not have any additional software installed on team. The security policy mandates the use of a secure communication protocol that support authentication and encryption for managing the servers.

  Which two automation tools must be used to meet these requirements? (Choose two.)

  A. CFEngine

  B. Ansible

  C. Chef

  D. Puppet

  E. Saltstack

  Correct Answer: DE

• Question 67:

  An engineer must interconnect two geographically separated data centers. The service provide offers a Layer 2 metro Ethernet link. The strict security policy requires that the information that is shared between two sites must be sent encrypted. The application deployed between sites requires a line-rate throughput regardless of the packet size and speed. Which solution meets these requirements?

  A. IPsec

  B. MACsec

  C. L2TPv2

  D. L2TPv3

  Correct Answer: B

  https://www.cisco.com/c/dam/en/us/td/docs/solutions/Enterprise/Security/MACsec/WP-High-Speed-WAN-Encrypt-MACsec.pdf

• Question 68:

  Which two configurations are available by using a service profile template in Cisco UCS Manager? (Choose two.)

  A. number of vHBAs

  B. ARP entries

  C. UUID assignment

  D. VXLAN membership

  E. target server

  Correct Answer: AC

  Reference:

  https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/cli/config/guide/2-2/b_UCSM_CLI_Configuration_Guide_2_2/b_UCSM_CLI_Configuration_Guide_2_2_chapter _0100000.html

• Question 69:

  An engineer must design a Cisco UCS environment that will connection to a storage area network. The solution must include support for these conditions:

  1.

  connectivity to the existing 10 Gigabit Ethernet network

  2.

  booting the server infrastructure from the network

  3.

  integration with the existing Fibre Channel storage arrays

  4.

  lossless data transfer

  Which solution should be used to meet these requirements?

  A. FCP

  B. FCoE

  C. CIFS

  D. NFS

  Correct Answer: B

• Question 70:

  A network architect must design a large-scale Cisco SAN topology. The customer has a limited budget, so a design that provides use of resources is required. To support this requirement, the architect to share array ports, ISL, and line card bandwidth. The customer has also presented these additional considerations:

  The customers plans to expand the network by 10% over the next two years. The customer's policy requires physically separated infrastructure to support high availability. Which solution should be used to meet these requirements?

  A. Collapsed-core

  B. Mesh

  C. Core-edge

  D. Edge-core-edge

  Correct Answer: C

  Please review this question.