Cisco 300-206 Online Practice Questions and Exam Preparation

Cisco 300-206 Online Questions & Answers

• Question 391:

  Which two statements about the utilization of IPv4 and IPv6 addresses in the Cisco ASA 9.x firewall access list configuration are true? (Choose two.)

  A. Mixed IPv4 and IPv6 addresses cannot be used in the same access list entry
  B. Mixed IPv4 and IPv6 addresses can be used in the same access list entry
  C. Mixed IPv4 and IPv6 addresses can be used in the same access list for network object group
  D. Mixed IPv4 and IPv6 addresses cannot be used in the same access list
  E. Mixed IPv4 and IPv6 addresses cannot be used in the same access list for network object group
  B. Mixed IPv4 and IPv6 addresses can be used in the same access list entry
  C. Mixed IPv4 and IPv6 addresses can be used in the same access list for network object group

• Question 392:

  An engineer is configuring MACsec encryption. Which two components does Cisco TrustSec NDAC MACsec support? (Choose two.)

  A. user-facing downlink port
  B. switch-to-switch connection
  C. switch-to-host connection
  D. host-facing links
  E. switch ports connected to other switches
  A. user-facing downlink port
  D. host-facing links

• Question 393:

  Which command enables uRPF on router's interface?

  A. ip protection source
  B. ip source guard enable
  C. ip reverse-path verify reachable-via any
  D. ip verify unicast source reachable-via interface_name
  E. ip verify reverse-path interface interface_name
  D. ip verify unicast source reachable-via interface_name

• Question 394:

  Which two voice protocols can the Cisco ASA inspect? (Choose two.)

  A. MGCP
  B. IAX
  C. Skype
  D. CTIQBE
  A. MGCP
  D. CTIQBE

• Question 395:

  A network engineer is troubleshooting and configures the ASA logging level to debugging. The logging-buffer is dominated by %ASA-6-305009 log messages. Which command suppresses those syslog messages while maintaining ability to troubleshoot?

  A. no logging buffered 305009
  B. message 305009 disable
  C. no message 305009 logging
  D. no logging message 305009
  D. no logging message 305009

• Question 396:

  You are network engineer at some company. There are issues with Internet access. Which capture ACL must be used to capture only return web traffic?

  A. access-list CAPT-ACL line 1 permit tcp any eq 80 10.10.1.0 255.255.255.0
  B. access-list CAPT-ACL line 1 permit tcp any 10.10.1.0 255.255.255.0 eq 80
  C. access-list CAPT-ACL line 1 permit tcp any 10.10.1.0 255.255.255.0 eq 80
  D. capture access-list CAPT-ACL line 1 permit tcp any eq 80 10.10.1.0 255.255.255
  A. access-list CAPT-ACL line 1 permit tcp any eq 80 10.10.1.0 255.255.255.0

• Question 397:

  If you encounter problems logging in to the Cisco Security Manager 4.4 web server or client or backing up its databases, which account has most likely been improperly modified?

  A. admin (the default administrator account)
  B. casuser (the default service account)
  C. guest (the default guest account)
  D. user (the default user account)
  B. casuser (the default service account)

• Question 398:

  Which two voice and video protocols does the Cisco ASA 5500 Series support with Cisco Unified Communications Application Inspection? (Chose two)

  A. SCTP
  B. SDP
  C. H.323
  D. H248
  E. SCCP
  F. SRTP
  C. H.323
  E. SCCP

• Question 399:

  Refer to the exhibit.

  

  Which two descriptions of the output are true? (Choose two.)

  A. Phase 2 shows that there is a route to the destination subnet
  B. All packets are permitted
  C. This output is from running the show capture command on the firewall
  D. This output is output from running the packet–tracer command
  E. The firewall uses the default route to reach the source IP address
  A. Phase 2 shows that there is a route to the destination subnet
  D. This output is output from running the packet–tracer command

• Question 400:

  Which two options are available with cisco security manager (more of benefits of using cisco security manager?

  A. Open simultaneous connections to each FW
  B. Upgrade operating system
  C. Upgrade IPS signatures
  D. Automatic software upgrade
  C. Upgrade IPS signatures
  D. Automatic software upgrade