Cisco 300-085 Online Practice Questions and Exam Preparation

Cisco 300-085 Online Questions & Answers

• Question 251:

  You notice that a Cisco Unity Connection server is running low on disk space. You discover that users are not deleting their voicemail messages, causing mailboxes to become very large. Which two solutions can help to alleviate the storage issues? (Choose two.)

  A. quotas
  B. compression
  C. aging
  D. handlers
  A. quotas
  C. aging

• Question 252:

  You configure a Cisco Unity Express module to integrate with Cisco Unified Communications Manager Express. You can use the following command to connect to the module from the Cisco Unified Communications Manager Express CLI:

  ABC_CORP#service-module integrated-Service-Engine 0/0 session

  Trying 10.1.10.2, 2002 ...

  Open se-10-1-10-1#

  However, you cannot pint the module from Cisco Unified Communications Manager Express and cannot use a web browser to connect the module. You see this message:

  ABC_CORP#ping 10.1.10.1

  Type escape sequence to abort.

  Sending 5, 100-byte ICMP Echos to 10.1.10.1, timeout is 2 seconds:

  Success rate is 0 percent (0/5)

  How can you fix this problem?

  A. Enable ICMP and web service on the Cisco Unity Express module.
  B. Enable the ISM interface on Cisco Unified Communications Manager Express.
  C. Add an IP address to the ISM interface in the same subnet as Cisco Unified Communications Manager Express.
  D. Add a host route from Cisco Unified Communications Manager Express to Cisco Unity via the ISM interface.
  C. Add an IP address to the ISM interface in the same subnet as Cisco Unified Communications Manager Express.

• Question 253:

  Which two statements about search spaces and partitions in Cisco Unity Connection are true? (Choose two.)

  A. A search space can contain extensions, partitions, and dial-in numbers of routing rules.
  B. They are used to define a reachable call route pattern for call transfer to operators or back to Cisco Unified Communications Manager on caller input during a greeting.
  C. They are used to set limits for a search of a directory call handler
  D. A search space can contain only partitions.
  E. A partition can contain call handler extensions and extensions for routing rules.
  B. They are used to define a reachable call route pattern for call transfer to operators or back to Cisco Unified Communications Manager on caller input during a greeting.
  D. A search space can contain only partitions.

• Question 254:

  The system administrator has successfully integrated Cisco Unity Connection over a WAN with Cisco Unified Communication Manager using SIP. When a call to a subscriber is forwarded to voicemail, the caller correctly hears the subscriber greeting. During a recent WAN oversubscription event, instead of routing the calls via SIP directly to Unity Connection, the AAR feature was used to route the calls via the PSTN to Unity Connection. This worked, however on forwarded calls, the caller no longer heard the subscriber's greeting, but rather an auto attendant message that asked them to enter the extension of a party they want to reach. Which cause of callers not hearing the correct subscriber greeting is most likely true?

  A. The telephone carrier is not preserving RDNIS across the network.
  B. AAR System Setting is not enabled in Unity Connection.
  C. Unity Connection Restriction Tables is not permitting calls via the PSTN.
  D. DTMF is not negotiated properly on this call.
  A. The telephone carrier is not preserving RDNIS across the network.

• Question 255:

  To properly configure the _cisco-uds._tcp. DNS SRV record, the administrator needs to know which servers are running the Cisco User Data Services service. By default, which servers run this service?

  A. Only the publisher node.
  B. The service is disabled by default and then enabled as required on a per-node basis.
  C. All servers in a Cisco Unified Communications Manager cluster.
  D. All call processing nodes in a cluster.
  C. All servers in a Cisco Unified Communications Manager cluster.

• Question 256:

  A customer's user tests voicemail functionality on a newly installed Cisco Unity Connection cluster and notices that the MWI function is not working properly. The user hears the greeting and can leave messages, but the MWI lamp on the phone is still switched off. Which two should a systems engineer check, in order to find the MWI configuration errors? (Choose two.)

  A. Review the MWI extensions of the created port group on the newly installed Cisco Unity Connection server, and check whether the extensions match the Ciso Unified Communications Manager configuration for MWI when integrating Cisco Unity Connection with the SCCP protocol.
  B. Check whether the MWI service is activated and running in the Service Management section on the Cisco Unity Connection Serviceability page.
  C. Check whether the search space of the created port group contains the route pattern for MWI extensions on the Cisco Unity Connection server.
  D. Check whether the voicemail ports on Cisco Unified Communications Manager are properly registered when integrating Cisco Unity Connection with the SCCP protocol.
  E. Review the port group configuration, and check whether the option "Enable Message Waiting Indicators" is checked when integrating Cisco Unity Connection with the SIP or SCCP protocol.
  A. Review the MWI extensions of the created port group on the newly installed Cisco Unity Connection server, and check whether the extensions match the Ciso Unified Communications Manager configuration for MWI when integrating Cisco Unity Connection with the SCCP protocol.
  E. Review the port group configuration, and check whether the option "Enable Message Waiting Indicators" is checked when integrating Cisco Unity Connection with the SIP or SCCP protocol.

• Question 257:

  In which three of the following cases can VPIM Networking be used for messaging? (Choose three.)

  A. Cisco Unity systems where the partner Microsoft Exchange Servers are in different Active Directory forests
  B. Cisco Unity with Microsoft Exchange 2000 or Microsoft Exchange 2003, and Cisco Unity with Lotus Domino
  C. Cisco Unity and Cisco Unity Express
  D. Cisco Unity and the Cisco Presence Server
  E. Cisco Unity and Cisco Unified Communication Manager
  F. Cisco Unity and Cisco Unified Contact Center Express
  A. Cisco Unity systems where the partner Microsoft Exchange Servers are in different Active Directory forests
  B. Cisco Unity with Microsoft Exchange 2000 or Microsoft Exchange 2003, and Cisco Unity with Lotus Domino
  C. Cisco Unity and Cisco Unity Express

• Question 258:

  Which VCS feature is used to group endpoints in logical scheduling groups?

  A. zones
  B. partitions
  C. calling search spaces
  D. areas
  A. zones

• Question 259:

  Where must an engineer navigate to configure a service profile for Cisco Jabber in Cisco Unified Communications Manager?

  A. User Management > User Settings > Service Profile
  B. User Management > End User
  C. User Management > User Settings > Role
  D. User Management > User Settings > UC Service
  A. User Management > User Settings > Service Profile

• Question 260:

  Which parameter must be set for the end user for Jabber for Windows or Mac to register successfully with Cisco Unified Communications Manager in softphone mode?

  A. primary extension
  B. group membership
  C. subscribe calling search space
  D. remote destination profiles
  E. device association
  A. primary extension