Cisco 300-075 Online Practice Questions and Exam Preparation

Cisco 300-075 Online Questions & Answers

• Question 481:

  When multiple Cisco Extension Mobility profiles exist, which actions take place when a user tries to log in to Cisco Extension Mobility?

  A. The login will fail because only a single Cisco Extension Mobility profile is allowed.
  B. The user must select the desired profile.
  C. The user must login to both profiles in the order they are presented.
  D. The user may login to both profiles in any order.
  E. Login will only be allowed to multiple profiles if the service parameter Allow Multiple Logins is enabled.
  B. The user must select the desired profile.

• Question 482:

  Which three CLI commands are used when configuring H.323 call survivability for all calls? (Choose three.)

  A. voice service voip
  B. telephony-service
  C. h323
  D. call preserve
  E. call-router h323-annexg
  F. transfer-system
  A. voice service voip
  C. h323
  D. call preserve

• Question 483:

  Which remote-site redundancy technology fails over to POTS dial peers from the Cisco Unified Communications Manager dial plan during a WAN failure?

  A. MGCP fallback
  B. H.323 fallback
  C. SCCP fallback
  D. SIP fallback
  A. MGCP fallback

• Question 484:

  Which action configures phones in site A to use G.711 to site B, but uses G.729 to site C?

  A. Configure Cisco Unified Communications Manager regions.
  B. Configure Cisco Unified Communications Manager locations.
  C. Configure transcoder resources in Cisco Unified Communications Manager.
  D. Configure a gatekeeper.
  A. Configure Cisco Unified Communications Manager regions.

• Question 485:

  Which statement about TEHO is true?

  A. The dial plan is simplified with local route groups.
  B. Local route groups add complexity to the dial plan.
  C. Toll charges can be reduced when TEHO is implemented with CAC.
  D. Toll charges can be reduced when TEHO is implemented with MGCP fallback.
  A. The dial plan is simplified with local route groups.

• Question 486:

  Which two statements are true when considering a Cisco VoIP environment for regional configuration? (Choose two.)

  A. G.711 requires 128K of bandwidth per call.
  B. To deploy a Cisco H.323 gatekeeper, you must configure MTP resources on the gatekeeper and only use G.711 between regions.
  C. G.729 requires 24K of bandwidth per call.
  D. The default codec does not matter if you have defined a hardware MTP in your Cisco Unified Communications Manager environment.
  C. G.729 requires 24K of bandwidth per call.
  D. The default codec does not matter if you have defined a hardware MTP in your Cisco Unified Communications Manager environment.

• Question 487:

  In RTMT, how many concurrent trace collections can you schedule to download the trace files to an SFTP or FTP server on your network?

  A. three
  B. four
  C. five
  D. six
  D. six

• Question 488:

  If your IP telephony administrator asks you to configure a local zone for your dial plan to control the volume of calls between two end points in a centralized multisite environment, which two types of Call Admission Control can be implemented? (Choose two.)

  A. locations based
  B. automated alternate routing
  C. gatekeeper based
  D. SRST
  E. Cisco Unified Communications Manager based
  A. locations based
  B. automated alternate routing

• Question 489:

  Refer to the exhibit.

  

  Which CSS is used at the HQ Cisco Unified Communications Manager to reroute calls via the PSTN when the SAF network is unavailable?

  A. the phone device CSS
  B. the phone line CSS
  C. the phone line/device combined CSS
  D. the SAF CSS configured on the CCD requesting service
  E. the phone AAR CSS configured at the phone device
  F. No special CSS is required. If SAF patterns are accessible, the PSTN reroute is automatic.
  E. the phone AAR CSS configured at the phone device

• Question 490:

  An engineer is configuring URI calling within the same cluster. Which two actions must be taken to accomplish this configuration? (Choose two.)

  A. Configure SIP trunk.
  B. Configure the SIP profile.
  C. Activate the URI service in Cisco Unified Serviceability.
  D. Configure SIP route patterns.
  E. Assign directory URIs to users.
  F. Configure the directory URI partition and calling search space.
  B. Configure the SIP profile.
  E. Assign directory URIs to users.