Cisco 300-075 Online Practice Questions and Exam Preparation

Cisco 300-075 Online Questions & Answers

• Question 381:

  Which option describes the meaning of a call termination cause code of 1 in a Cisco Unified Communications Manager call detail record?

  A. call rejected
  B. unallocated (unassigned) number
  C. resource unavailable, unspecified
  D. normal call clearing
  B. unallocated (unassigned) number

• Question 382:

  Which action configures AAR to route the calls that have been rejected by the gatekeeper CAC through the PSTN?

  A. Configure Cisco IP Phones for AAR.
  B. Configure AAR to work with SRST.
  C. Configure AAR to work with CTI route points.
  D. This configuration is not possible using AAR.
  D. This configuration is not possible using AAR.

• Question 383:

  Which two statements about Cisco Unified Survivable Remote Site Telephony are correct? (Choose two.)

  A. Cisco SRST on a router registers all phones to that remote site router if link to the central Cisco Unified CM cluster is lost.
  B. Cisco SRST is to get SIP trunk failover capability for Cisco Unified CM.
  C. Using a Cisco router, Cisco SRST can provide failover between these routers to ensure remote site operations.
  D. Cisco SRST enables failover between two or more Cisco Unified Communications Manager servers in a cluster if one server is placed at a remote site.
  E. Cisco SRST can allow users to make calls with the same dial-plan as if connected to Cisco Unified CM cluster.
  A. Cisco SRST on a router registers all phones to that remote site router if link to the central Cisco Unified CM cluster is lost.
  C. Using a Cisco router, Cisco SRST can provide failover between these routers to ensure remote site operations.

• Question 384:

  Company X has a Cisco Unified Communications Manager cluster and a VCS Control server with video endpoints registered on both systems. Users find that video endpoints registered on Call manager can call each other and likewise for the endpoints registered on the VCS server. The administrator for Company X realizes he needs a SIP trunk between the two systems for any video endpoint to call any other video endpoint. Which two steps must the administrator take to add the SIP trunk? (Choose two.)

  A. Set up a SIP trunk on Cisco UCM with the option Device-Trunk with destination address of the VCS server.
  B. Set up a subzone on Cisco UCM with the peer address to the VCS cluster.
  C. Set up a neighbor zone on the VCS server with the location of Cisco UCM using the menu option VCS Configuration > Zones > zone.
  D. Set up a SIP trunk on the VCS server with the destination address of the Cisco UCM and Transport set to TCP.
  E. Set up a traversal subzone on the VCS server to allow endpoints that are registered on Cisco UCM to communicate.
  A. Set up a SIP trunk on Cisco UCM with the option Device-Trunk with destination address of the VCS server.
  C. Set up a neighbor zone on the VCS server with the location of Cisco UCM using the menu option VCS Configuration > Zones > zone.

• Question 385:

  On which Cisco Unified Communications Manager configuration parameter does the CODEC that a Cisco IP Phone uses for a call depend?

  A. media resources
  B. region
  C. physical location
  D. enterprise parameters
  E. location
  B. region

• Question 386:

  Which device must be accessible from the public Internet in a Collaboration Edge environment?

  A. Expressway-C
  B. Cisco Unified Communications Manager
  C. Cisco IM and P
  D. Expressway-E
  E. VCS Control
  D. Expressway-E

• Question 387:

  If you want to delete a SAF-enabled trunk from Cisco Unified Communications Manager Administration, what must you do first?

  A. Disassociate the trunk from the CCD advertising service or CCD requesting service.
  B. Delete the trunk from the CCD requesting service node.
  C. Place the Cisco Unified Communications Manager node in standby mode.
  D. Redirect CCD advertising and requesting services to another Cisco Unified Communications Manager.
  A. Disassociate the trunk from the CCD advertising service or CCD requesting service.

• Question 388:

  An engineer is configuring a SIP profile for Cisco VCS SIP trunk on Cisco Unified Communications Manager and enables the option "Use Fully Qualified Domain Name" in SIP Requests. Which result is achieved by enabling this option?

  A. Resolve FQDN using DNS type SRV record.
  B. Resolve FQDN using DNS type A record.
  C. Ensure FQDN is used in SIP Identity header.
  D. Ensure FQDN is used in SIP Request header.
  D. Ensure FQDN is used in SIP Request header.

• Question 389:

  Where do you specify the device mobility group and physical location after they have been configured?

  A. phones
  B. DMI
  C. device mobility CSS
  D. device pool
  E. MRGL
  F. locale
  D. device pool

• Question 390:

  In which two locations can you verify that a phone has a standby Cisco Unified Communications Manager? (Choose two.)

  A. RTMT
  B. phone menu
  C. Cisco Unified Serviceability
  D. phone webpage
  B. phone menu
  D. phone webpage