Cisco 300-075 Online Practice Questions and Exam Preparation

Cisco 300-075 Online Questions & Answers

• Question 151:

  Which two options should be selected in the SIP trunk security profile that affect the SIP trunk pointing to the VCS? (Choose two.)

  A. Accept Unsolicited Notification
  B. Enable Application Level Authorization
  C. Accept Out-of-Dialog REFER
  D. Accept Replaces Header
  E. Accept Presence Subscription
  A. Accept Unsolicited Notification
  D. Accept Replaces Header

• Question 152:

  Which trunk should you use in an H.323 gatekeeper-controlled network?

  A. H.323
  B. H.225
  C. SIP
  D. Intercluster
  E. MGCP FXO trunk
  F. MGCP T1/E1 trunk
  B. H.225

• Question 153:

  Refer to the exhibit.

  

  Assume that the HQ phones have access to the HQ partition, and BR phones have access to the BR partition. Which set of implementations would best address the overlapping directory number extensions for intersite (WAN) calling between the HQ site and the BR site?

  A. Configure a route pattern 8222.[12]XXX for site HQ, and assign it to partition HQ. Configure the called party DDI of Predot. Configure a route pattern for site BR 8111.[1-3]XXX, and assign it to partition BR. Configure called party DDI Predot. Use the local gateway at each site. Prefix the appropriate site code for the calling number.
  B. Configure a single route pattern for both sites 8[12,12,12].[1-32]XXX. Use a route list that contains the local route group for each site. Prefix the appropriate site code for the calling number.
  C. Configure a translation pattern 8222.[12]XXX for site HQ, and assign it to partition HQ. Use a CSS that contains the partitions for BR phones. Configure a translation pattern 8111.[1-3]XXX for site BR, and assign it to partition BR. Use a CSS that contains the partitions for HQ phones. For both translation patterns, configure the called party DDI of Predot. Prefix the appropriate site code for the calling number.
  D. Configure a translation pattern 8222.[12]XXX for site HQ, and assign it to partition BR. Use a CSS that contains the partitions for HQ phones. Configure a translation pattern 8111.[1-3]XXX for site BR, and assign it to partition HQ. Use a CSS that contains the partitions for BR phones. For both translation patterns, configure the called party DDI of Predot. Prefix the appropriate site code for the calling number.
  C. Configure a translation pattern 8222.[12]XXX for site HQ, and assign it to partition HQ. Use a CSS that contains the partitions for BR phones. Configure a translation pattern 8111.[1-3]XXX for site BR, and assign it to partition BR. Use a CSS that contains the partitions for HQ phones. For both translation patterns, configure the called party DDI of Predot. Prefix the appropriate site code for the calling number.

• Question 154:

  Which route pattern is the best match in Cisco Unified Communications Manager for a dialed number of +1 412 555 1234?

  A. \+1412.XXXXXXX
  B. +1!
  C. ^\+1412.......$
  D. \+1.!
  A. \+1412.XXXXXXX

• Question 155:

  You want to avoid unnecessary interworking in Cisco TelePresence Video Communication Server, such as where a call between two H.323 endpoints is made over SIP, or vice versa. Which setting is recommended?

  A. H.323 - SIP interworking mode. Reject
  B. H.323 - SIP interworking mode. On
  C. H.323 - SIP interworking mode. Registered only
  D. H.323 - SIP interworking mode. Off
  E. H.323 - SIP interworking mode. Variable
  C. H.323 - SIP interworking mode. Registered only

• Question 156:

  Which configuration command disables the secondary dial tone on the branch office ISR for users calling from the PSTN into the branch office during a WAN failure?

  A. direct-inward-dial
  B. voice translation-rule
  C. incoming called-number
  D. application
  A. direct-inward-dial

• Question 157:

  When troubleshooting high CPU utilization withtin the Command Line Interface (CLI) of a Cisco Unified Communications Manager (CUCM), which command will show the process CPU usage for all processes?

  A. show perf query counter Process "% CPU Time"
  B. show network status
  C. show perf query counter Partition "% Used"
  D. show perf query counter Process "Process Status"
  A. show perf query counter Process "% CPU Time"

• Question 158:

  Scenario:

  There are two call control systems in this item.

  The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone.

  The Cisco VCS and TMS control the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows

  DP:

  

  Locations:

  

  CSS:

  

  SRST:

  

  SRST-BR2-Config:

  

  BR2 Config:

  

  SRSTPSTNCall:

  

  Which device configuration option will allow an administrator to control bandwidth between calls placed between branches?

  A. Media Resource Group List
  B. Device Pool
  C. Location
  D. AAR Group
  E. Regions
  C. Location

• Question 159:

  What happens when a user logs in using the Cisco Extension Mobility Service on a device for which the user has no user device profile?

  A. The Extension Mobility log in fails.
  B. The device takes on the default device profile for its type.
  C. The user can log in but does not have access to any features, soft key templates, or button templates.
  D. The device uses the first device profile assigned to the user in Cisco Unified Communications Manager.
  B. The device takes on the default device profile for its type.

• Question 160:

  Which method can be used to address variable-length dial plans?

  A. Overlap sending and receiving.
  B. Add a prefix for all calls that are longer than 10-digits long
  C. Use nested translation patterns to eliminate inter-digit timeout
  D. Use the @macro on the route pattern
  E. Use MGCP gateways, which support variable-length dial plans
  A. Overlap sending and receiving.