CompTIA 220-901 Online Practice Questions and Exam Preparation

CompTIA 220-901 Online Questions & Answers

• Question 291:

  Which of the following BEST describes the reason a network administrator would task a technician with replacing a hub with a switch?

  A. The hub did not provide PoE
  B. The hub had too many collisions
  C. The hub was out of ports
  D. The hub had a bad port
  B. The hub had too many collisions

• Question 292:

  A technician is trying to install a full-size PCI card into a slim line desktop PC. Which of the following would MOST likely be required to facilitate installation?

  A. RAID card
  B. CNR card
  C. Riser card
  D. MCA card
  C. Riser card

• Question 293:

  A network administrator has noticed some lag in between two buildings connected by underground cabling The administrator wants to make sure the network traffic is using the newer fiber connection Instead of the older backup CAT5 Ethernet connection Which of the following tools can be used to ensure that traffic is taking the desired path?

  A. ipconfig
  B. tracert
  C. nslookup
  D. netstat
  B. tracert

• Question 294:

  Which of the following is used to facilitate communications with a user's smartphone in order to make purchases and payments by proximity?

  A. Bluetooth
  B. IR
  C. NFC
  D. WPS
  C. NFC

• Question 295:

  A network printer is online and ready. The accounting group is unable to print to this network printer, but other departments can. Which of the following would the technician use to resolve the problem?

  A. Replace the printer's network cable
  B. Modify the security setting of the print spooler
  C. Restart the TCP/IP print spooler service
  D. Use the manufacturer's maintenance kit
  B. Modify the security setting of the print spooler

• Question 296:

  A customer brings in a PC that recently stopped working. The technician begins diagnosis and finds the following symptoms:

  The PC turns on and all fans spin normally

  No display output is given either from onboard video or a PCle video card.

  There are no POST beep codes at boot even with the CPU and RAM fully removed.

  Which of the following is the MOST accurate conclusion based on these findings?

  A. The PSU wattage is rated too low for the components.
  B. The CMOS battery is dead and needs replacement.
  C. The PSU has its voltage switch set to 240V.
  D. The motherboard has failed and needs replacement.
  A. The PSU wattage is rated too low for the components.

• Question 297:

  When upgrading RAM in a laptop, which of the following would a technician need to check FIRST in the manufacturer's specification?

  A. Compatibility between CPU and memory module
  B. Maximum capacity and speed for the motherboard
  C. Number of slots in use on the motherboard
  D. Maximum capacity of each RAM module
  C. Number of slots in use on the motherboard

• Question 298:

  A user reports that every time a document is printed to a laser printer, the document lettering smudges making it unreadable which of the following is the cause?

  A. The print server is receiving error codes.
  B. The toner cartridge is leaking
  C. The fuser is not functioning property
  D. The Ink has not fully dried
  C. The fuser is not functioning property

• Question 299:

  A technician needs to run a cable for a new computer and the requirement is CAT6. Which of the following wiring connectors should the technician use when terminating the cable?

  A. BNC
  B. RJ-12
  C. RJ-45
  D. ST
  E. F-connector
  C. RJ-45

• Question 300:

  A company asks a technician to recommend a solution to conserve paper without degrading the print quality. Which of the following printer settings would BEST enable the technician to accomplish this request?

  A. Density
  B. Collate
  C. Duplex
  D. Color management
  C. Duplex