CompTIA 220-1001 Online Practice Questions and Exam Preparation

CompTIA 220-1001 Online Questions & Answers

• Question 691:

  SIMULATION

  Ann, a local librarian, has had a previously used wireless access point donated to her. She has instructed you to configure this new wireless access point for her public library. Ann plans to allow anyone to connect to the access point without having to ask her for configuration information. Additionally, Ann knows that her neighbors have wireless network and wants to ensure that her network has the least likelihood of interfering with the other networks. Ann has provided you with the following information.

  Wireless Name: Library New Router Password: Secure$1

  INSTRUCTIONS

  Instructions: Select the Public Library in the diagram to configure the wireless network. Once the wireless network tabs are configured, select the save button. When you have completed the simulation, please, select the Done button to

  submit.

  Configure Ann's wireless library network using the network adapter window.

  If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.

  

  

  A. Check the answer in explanation.
  A. Check the answer in explanation.

  ---

  

  

• Question 692:

  A user reports the laser printer has stopped printing. When performing a lest print, the page comes out mostly blank with ghosting images. A technician verifies a new toner cartridge was Installed several weeks ago. There are no errors in the system's log. Which of the following is the MOST likely reason for the printer issue?

  A. There is no connectivity between the printer and the computer.
  B. The fuser has failed and requires replacement.
  C. Printer drivers are not installed on the computer.
  D. There is a stuck print job in the print queue.
  B. The fuser has failed and requires replacement.

• Question 693:

  SIMULATION

  The network administrator has changed the IP address of ComputerA from 192.168.1.20 to 10.10.10.20 and now Jane, a user, is unable to connect to file shares on ComputerA from ComputerB using the computer name.

  INSTRUCTIONS

  Using the available tools, resolve the connectivity issues. After troubleshooting the issue, verify a successful connection. If at any time you would like to bring back the initial state of the simulation? please click the Reset All button.

  

  A. Check the answer in explanation.
  A. Check the answer in explanation.

  ---

  Need to flush the DNS cache on Computer B:

  

• Question 694:

  Which of the following resources in the MOST critical when using cloud file-storage synchronization applications?

  A. Disk speed
  B. I/O bandwidth
  C. RAM utilization
  D. CPU utilization
  B. I/O bandwidth

• Question 695:

  A customer's workstation will not boot A technician runs diagnostics on the system and discovers it is set up in a RAID 0 configuration, and a single SATA hard drive failed. The system was set up for Performance. Once repaired the customer request redundancy be built into the system and an increase in performance. Which of the following describes how the technician should set up the new RAID configuration?

  A. RAID 1 configuration that will utilize new SSD.
  B. RAID 2 configuration that will allow the loss of a hard drive without failure.
  C. RAID 6 configuration that will allow the loss of two hard drives without failure.
  D. RAID 10 configuration utilizing HDD
  D. RAID 10 configuration utilizing HDD

• Question 696:

  A technician is selecting a projector for a conference room that always has a significant amount of light due to the building design. Which of the following is the MOST Important property In this case?

  A. Resolution
  B. Lumen output
  C. Keystone
  D. Contrast
  D. Contrast

• Question 697:

  A user contacts the help desk to report the Internet is not working. Which of the following steps should the technician take NEXT?

  A. Document possible reasons why the Internet is no longer working
  B. Have the user perform a hard shutdown and a cold boot
  C. Instruct the user to disconnect the Ethernet cable for 30 seconds
  D. Ask questions and use available tools to clarify the issue
  D. Ask questions and use available tools to clarify the issue

• Question 698:

  Which of the following must be configured to allow two VLANs to communicate with each other?

  A. Common gateway device
  B. Static IP address on a switch
  C. Valid IPv6 link local address
  D. Connection to a VPN service
  A. Common gateway device

• Question 699:

  Which of the following channels would MOST likely be used by a 2.4GHz WAP to reduce the possibility of a channel overlap issue? (Select TWO),

  A. 6
  B. 8
  C. 10
  D. 11
  E. 32
  F. 36
  A. 6
  F. 36

• Question 700:

  A technician recently set up a VM on a client PC to create and test software. The technician has since discovered the virtual environment has no external connectivity. The technician verifies the host has an Internet connection. Which of the following should the technician do NEXT to resolve the issue?

  A. Configure a static IP for the VM and enable bridged networking.
  B. Create a host record with the IP address and hostname of the VM and store it on the host.
  C. Configure a dynamic IP for the host and the VM.
  D. Configure a dynamic IP for the host and disable any host intrusion detection software.
  A. Configure a static IP for the VM and enable bridged networking.