CompTIA 220-1001 Online Practice Questions and Exam Preparation

CompTIA 220-1001 Online Questions & Answers

• Question 551:

  Which of the following cloud computing concepts allows scalable services to be provided to the client?

  A. On-demand
  B. Metered
  C. Rapid elasticity
  D. Resource pooling
  C. Rapid elasticity

• Question 552:

  A technician would like to install an internal storage drive for a computer. Which of the following cable connectors would MOST likely be used to transfer data? (Select TWO).

  A. USB-C
  B. IDE
  C. SATA
  D. USB-A
  E. Motex
  F. Lightning
  B. IDE
  C. SATA

• Question 553:

  A user connects to a wireless network but cannot access the Internet. A technician investigates the issue and gathers the following data from a mobile device:

  SSID: Wireless1 Type: Infrastructure k Frequency: 5GHz Mode: 802.11 n Security: WPA2 Password: 843000261 Signal strength: -48dB SNR: 38dB IP address: 169.254.1.12 Subnet mask: 255255.00

  Which of the following is the MOST likely cause of the issue?

  A. WPA2 passwords require characters, of which a minimum of ten is needed.
  B. The mobile device is not receiving an IP address from DHCP.
  C. The SNR is too low for a high-quality connection.
  D. The signal strength is too low for a high-quality connection.
  E. The frequency is not correct for 802.11n
  B. The mobile device is not receiving an IP address from DHCP.

• Question 554:

  A user reports a complete loss of data. A technician determines the data was stored on an external drive, and the drive light is working properly. Which of the following steps should the technician perform NEXT?

  A. Configure a temporary drive and install backup software.
  B. Reseat the memory, reboot the computer, and check the logs.
  C. Replace the drive cable and run diagnostics on the drive.
  D. Boot into BIOS and verify the onboard drive size and settings.
  C. Replace the drive cable and run diagnostics on the drive.

• Question 555:

  Users in a print room have a new high-end laser printer. They set the printer to print on both sides of the paper by default. They initiated several print jobs, but none of the jobs printed. Which of the following settings should a technician check to resume printing?

  A. Spooler
  B. Draft
  C. Duplex
  D. Collate
  A. Spooler

• Question 556:

  A technician has received a PC with a faulty motherboard, and has been asked to recover data from the 128GB SSD hard drive. Which of the following would be the EASIEST method to gain access to the data?

  A. Reinstall Windows and use the File Recovery Tool.
  B. Send the drive to a data recovery specialist.
  C. Attach the drive to a SAN device.
  D. Attach the drive to an external enclosure
  C. Attach the drive to a SAN device.

• Question 557:

  A virtual environment in which an application uses memory and a processor from a provider based on a leased rate that depends on the amount of resources used per month is referred to as:

  A. virtual application streaming service.
  B. metered service.
  C. resource pooling.
  D. SaaS.
  B. metered service.

• Question 558:

  DRAG DROP(1)

  A customer, Ann, has requested two custom PCs, one to be used for gaming and the other to be used as a virtualization workstation for her business.

  The gaming PC should support the latest games and gaming peripherals.

  The virtualization workstation should be able to host several production virtual machines as part of Ann's home business.

  INSTRUCTIONS

  Use the tabs at the top to switch between the PCs.

  Objects should be placed on the appropriate slot/display areas and can only be used once.

  All slot/display areas should be filled.

  If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.

  Select and Place:

  

  

• Question 559:

  A user, who recently switched offices, calls the help desk regarding the speed of network applications. A technician determines the user is only connected at 100Mb, but a 1Gb network card is already present. Which of the following is the MOST likely reason why the user is unable to connect beyond 100Mb speeds?

  A. The PC is assigned a static IP address that is in the wrong VLAN.
  B. The user is connected via wired and wireless connections, but the PC is using the wireless connection.
  C. The user's patch cord Is a Cat 5 cable and needs to be replaced with a Cat 5e cable.
  D. The PC is connected through a UPS line conditioner and needs to be connected directly.
  C. The user's patch cord Is a Cat 5 cable and needs to be replaced with a Cat 5e cable.

• Question 560:

  A technician is troubleshooting a network connectivity issue. The technician reviews the output of the following commands:

  

  and

  

  Given the above information, which of the following is the root cause of the problem?

  A. The network adapter is disabled
  B. The DHCP server is not available
  C. The DNS server is not responding
  D. The network cable is not connected
  B. The DHCP server is not available