CompTIA 220-1001 Online Practice Questions and Exam Preparation

CompTIA 220-1001 Online Questions & Answers

• Question 341:

  A technician is repairing a computer mat has been falling 10 POST. When the technician presses the power button, the LED lights turn on. the tans rotate, and the hard drive spins up. However, nothing displays on the known-good monitor, and the computer does not boot up. Which of the following will MOST likely provide diagnostic information?

  A. Pressing the F8 key
  B. Motherboard lights
  C. System specifications
  D. BIOS information screen
  A. Pressing the F8 key

• Question 342:

  DRAG DROP (2)

  A customer, Ann, has requested two custom PCs, one to be used for gaming and the other to be used as a virtualization workstation for her business.

  The gaming PC should support the latest games and gaming peripherals.

  The virtualization workstation should be able to host several production virtual machines as part of Ann's home business.

  INSTRUCTIONS

  Use the tabs at the top to switch between the PCs.

  Objects should be placed on the appropriate slot/display areas and can only be used once.

  All slot/display areas should be filled.

  If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.

  Select and Place:

  

  

• Question 343:

  Ann, a user, realizes she forgot to pack her laptop's AC adapter when she was preparing for a business trip. She calls the help desk to ask how to maximize her battery life until she returns to the office. Which of the following are the BEST solutions? (Choose two.)

  A. Disable the speakers.
  B. Dim the screen's brightness.
  C. Turn on wireless.
  D. Turn off Bluetooth.
  E. Turn on GPS.
  F. Mute the microphone.
  B. Dim the screen's brightness.
  D. Turn off Bluetooth.

• Question 344:

  A technician has assembled an ITX system with a modern processor, but the machine does not POST. The processor fan spins up, and the LEDs on the motherboard light up, but no beeps are emitted by the system.

  Which of the following is the MOST likely cause of this issue?

  A. An incompatible NVMe SSD is installed.
  B. An incompatible memory type is installed.
  C. The wrong generation CPU is installed.
  D. A faulty hard drive is installed.
  D. A faulty hard drive is installed.

• Question 345:

  737 - (Topic 4)

  Which of the following wireless technologies only requires one of the devices to be connected to a power source?

  A. RFID
  B. NFC
  C. Bluetooth
  D. Z-wave
  C. Bluetooth

• Question 346:

  A technician is replacing an older video card with a new high-end video card in a workstation. The installation was successful, the new card seated properly, and power is connected. However, upon booting, the computer now emits several beeps and will not boot, but shows no error messages. Which of the following is MOST likely the cause of this issue?

  A. The BIOS is out-of-date
  B. The is not enough PSU output
  C. There is an onboard RAM mismatch
  D. GPU is overlocked
  E. The firmware is out-of-date
  B. The is not enough PSU output

• Question 347:

  Joe, a user, cannot access the network shared drive after network maintenance was performed. A technician verifies there is a valid IP address; however, the device is not on the correct subnet. The device must continue to be accessible by a third party. Which of the following actions should the technician take to BEST resolve the issue?

  A. Remove and replace the NIC.
  B. Release and renew the computers DHCP assignment
  C. Change the mask on the computer and reboot.
  D. Assign a new port on the switch to the user
  B. Release and renew the computers DHCP assignment

• Question 348:

  A technician received a call that the network printer was printing garbled text. The technician printed a test page from several users' workstations and received the same result The technician then ran a diagnostic on the printer, and everything passed After uninstalling the printer from a user's workstation and then reinstalling it. the printer is now working properly Which of the following was the cause of this issue?

  A. The font was changed by the user in the printing preferences.
  B. There were several print jobs hung in the queue
  C. The toner level in the printer was extremely low.
  D. Drivers on the users' workstations were out of date
  E. The print server spooler file was corrupt
  D. Drivers on the users' workstations were out of date

• Question 349:

  Multiple users report that the network printer, which is connected through the print server, is not printing. Which of the following should a technician do FIRST to remedy this situation?

  A. Replace the USB cable.
  B. Reinstall the drivers on users' PCs.
  C. have users restart their PCs.
  D. Clear the print queue.
  D. Clear the print queue.

• Question 350:

  A small company rents rack space in a colocation center, which was designed for high availability, for its servers that run critical busin ess applications. This Is an example of a:

  A. private cloud.
  B. public cloud.
  C. hybrid cloud.
  D. community cloud.
  A. private cloud.