CompTIA 220-1001 Online Practice Questions and Exam Preparation

CompTIA 220-1001 Online Questions & Answers

• Question 161:

  A technician is troubleshooting an aging system that reboots randomly, loses its BIOS settings intermittently, and operates very slowly when it boots up. After checking the BIOS battery and finding it at a good voltage, which of the following should the technician check NEXT?

  A. RAID battery
  B. Processor seating
  C. Distended capacitors
  D. RAM seating
  C. Distended capacitors

• Question 162:

  A technician is building out a small retail shop. The owner wants all the cash registers to remote into a server in the back of the shop rather than running an OS locally. Which of the following should the technician install for the registers?

  A. Thin clients
  B. Portable mobile devices
  C. Touch screen kiosks
  D. Laptops with docking stations
  A. Thin clients

• Question 163:

  A small business owner purchased an MFP and would like customers to be able to print from their mobile devices. However, customers should not be granted access to the wireless network. Which of the following should the business owner enable? (Select TWO).

  A. AirPrint
  B. Parallel
  C. NFC
  D. Serial
  E. USB
  F. Bluetooth
  B. Parallel
  E. USB

• Question 164:

  A multimedia workstation has an existing SATA hard drive that is approaching full capacity. A technician wants to add additional hard drives into this workstation to store additional data. These drives will be used purely for file storage, and hardware redundancy is required to be in place to prevent data loss. The technician plans to add a PCle storage adapter to help fulfill these requirements. Which of the following actions should the technician take when installing this new hardware? (Select TWO).

  A. The driver for the storage adapter must be installed into the OS.
  B. The storage adapter should be places highest in the boot order.
  C. The storage adapter should use RAID 0.
  D. The additional hard drives must also use the SATA interface.
  E. The storage adapter should be configured for mirroring.
  D. The additional hard drives must also use the SATA interface.
  E. The storage adapter should be configured for mirroring.

• Question 165:

  A printer stops working in the billing department and cannot be repaired. A new printer has been ordered and a technician is tasked with allowing other users to print to the billing manager's printer until the new printer arrives. The manager's printer is currently used via USB connection, and there are no network jacks available for use.

  Which of the following is the BEST way for the technician to allow access to the printer?

  A. Create a share on the manager's computer and give the users rights to the share.
  B. Install the printer on the users' desktops and point it to the IP address of the manager's computer.
  C. Purchase a wireless printer so the users can access the printer via network.
  D. Provide flash drives to the users so they can transfer data to the manager's computer for printing.
  C. Purchase a wireless printer so the users can access the printer via network.

• Question 166:

  Which of the following is a type of reversible connector?

  A. RJ45
  B. Molex
  C. eSATA
  D. USB-C
  D. USB-C

• Question 167:

  A technician is replacing the monitor on a PC. The new monitor has the same screen resolution as the previous one, but it is a different model. When the new monitor is turned on, the icons are displayed very largely. Which of the following should the technician do FIRST to troubleshoot issue.?

  A. Restart the desktop.
  B. Replace the VGA cable
  C. Replace the video card.
  D. Update the video drivers
  D. Update the video drivers

• Question 168:

  SIMULATION

  Laura, a customer, has instructed you to configure her home office wireless access point.

  She plans to use the wireless network for finances and has requested that the network be setup with the highest encryption possible.

  Additionally, Laura knows that her neighbors have wireless networks and wants to ensure that her network is not being interfered with by the other networks.

  She requests that the default settings be changed to the following.

  Wireless Name: HomeWiFi Shared Key: CompTIA Router Password: Secure$1

  Finally, Laura wants to ensure that only her laptop and SmartPhone can connect to the network.

  Laptop: IP Address 192.168.1.100 Hardware Address: 00:0A:BF:03:C4:54 SmartPhone: IP Address 192.168.1.101 Hardware Address: 09:2C:D0:22:3F:11

  INSTRUCTIONS

  Configure Laura's wireless network using the network adapter window.

  If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.

  

  

  A. Check the answer in explanation.
  A. Check the answer in explanation.

• Question 169:

  A user states the department laser printer continues to display a paper jam error message despite the jam being cleared. Which of the following should a technician do to troubleshoot this problem?

  A. Check the paper path for blocked sensors
  B. Replace the duplex assembly
  C. Run the printer's internal diagnostics
  D. Verify the pickup rollers are in working order
  A. Check the paper path for blocked sensors

• Question 170:

  Joe, an Android smartphone user Installs a 64GB microSD card because he has been receiving messages about low storage space Despite the additional storage showing as available, the messages persist Which ol the following actions should Joe take NEXT to resolve the issue? (Select TWO)

  A. Move photos, videos, music and other personal files from the built-in storage to the microSD card
  B. Enable automatic cloud synchronization of all data on the smartphone
  C. Uninstall infrequently used applications from the smartphone
  D. Configure installed applications to run from the microSD card instead of built-in storage
  E. Check for and install updates to both the smartphone OS and applications.
  F. Restore the smartphone to its original factory settings
  A. Move photos, videos, music and other personal files from the built-in storage to the microSD card
  F. Restore the smartphone to its original factory settings