Cisco 210-060 Online Practice Questions and Exam Preparation

Cisco 210-060 Online Questions & Answers

• Question 261:

  Which three methods can remotely force a Cisco Unified Communications Manager Express phone to reset? (Choose three.)

  A. Issue a shutdown, no shutdown command on a switch port that provides PoE to a Cisco phone.
  B. Issue the restart command under the ephone-dn configuration of the phone.
  C. Issue the reset command under the ephone configuration of the phone.
  D. Issue the reset command under the ephone-dn configuration of the phone.
  E. Issue the reset H.H.H (mac-address) command telephony-service configuration.
  F. Issue the reset H.H.H (mac-address) command under global configuration.
  A. Issue a shutdown, no shutdown command on a switch port that provides PoE to a Cisco phone.
  C. Issue the reset command under the ephone configuration of the phone.
  E. Issue the reset H.H.H (mac-address) command telephony-service configuration.

• Question 262:

  Several users in the same Call Manager group reported that they receive a fast busy tone when they go off hook. They reported that the issue went away after a few minutes. Where should the voice systems administrator begin troubleshooting?

  A. SIP gateway
  B. Cisco Unified Communications Manager subscriber
  C. network cable
  D. 7945 IP phone
  B. Cisco Unified Communications Manager subscriber

• Question 263:

  Which describes how to provide a third directory number button and a BLF speed dial for twelve of the Cisco Unified IP Phone 7965?

  A. Modify the Standard User softkey template.
  B. Copy the Standard User softkey template, name it, and add the requested features.
  C. Copy the Standard 7965 SCCP phone button template, rename it, and add the requested features.
  D. It is not possible to add a third DN and a BLF speed dial to the IP Phone 7965 IP.
  C. Copy the Standard 7965 SCCP phone button template, rename it, and add the requested features.

• Question 264:

  An administrator has determined that an end user is experiencing jitter. Which symptom is the end user experiencing?

  A. choppy
  B. crosstalk
  C. static
  D. screeching
  A. choppy

• Question 265:

  IP WAN failure has occurred. Which two configurations must be made to allow calls to or from an IP phone at a branch location to complete to a destination outside of that branch? (Choose two.)

  A. Survivable Remote Site Telephony is configured on the branch router.
  B. LAN failover configuration is set to Survivable Remote Site Telephony.
  C. Call Forward UnRegistered option is configured on each branch phone profile.
  D. POTS WAN failover is set to Survivable Remote Site Telephony.
  E. An ISDN is configured as a primary survivable backup site
  C. Call Forward UnRegistered option is configured on each branch phone profile.
  E. An ISDN is configured as a primary survivable backup site

• Question 266:

  Which three choices are required for the boot process for a Cisco IP phone? (Choose three.)

  A. TFTP services
  B. DHCP services
  C. Voice VLAN
  D. Routing protocol
  E. TCP/IP
  F. PortFast
  A. TFTP services
  B. DHCP services
  C. Voice VLAN

• Question 267:

  Which three items are required to provision core telephony service on the Cisco Unified Communications Manager Express router? (Choose three.)

  A. MAC address
  B. IP source address
  C. dial peer
  D. ephone
  E. max-dn
  F. max-ephone
  B. IP source address
  E. max-dn
  F. max-ephone

• Question 268:

  A voicemail user reports that he cannot access Cisco Unity Connection from the IP phone message button. Which option must you perform to resolve the problem?

  A. In Cisco Unified Communications Manager, navigate to Advanced Features > Voicemail to confirm that the user has the correct voicemail profile
  B. In Cisco Unified Communications Manager, navigate to Device > Phone to confirm that the device has the correct voicemail profile
  C. In Cisco Unified Communications Manager, navigate to Device > Phone to confirm that the directory number has the correct voicemail profile
  D. In Cisco Unified Communications Manager, navigate to User Management > End User to confirm that the user has the correct voicemail profile
  E. In Cisco Unity Connection, navigate to Users > Users to confirm that the user web password is correct.
  C. In Cisco Unified Communications Manager, navigate to Device > Phone to confirm that the directory number has the correct voicemail profile

• Question 269:

  You are a network administrator tasked with configuring the device security mode for a single device. What is the result of your configuring the new device security mode in the phone configuration window of Cisco Unified Communications Manager?

  A. a rebuild of the device configuration .xml file
  B. an automatic reboot of the entire cluster
  C. an automatic connection to the security mode database
  D. a rebuild of the device configuration .exe file
  A. a rebuild of the device configuration .xml file

• Question 270:

  Which type of user in Cisco Unified Communications Manager has an interactive login?

  A. Administrator
  B. End user
  C. Application user
  D. Phone user
  B. End user