Oracle 1Z0-879 Online Practice Questions and Exam Preparation

Oracle 1Z0-879 Online Questions & Answers

• Question 341:

  Given the following entry in /etc/nsswitch.conf:

  hosts: nis [NOTFOUND=return] files Which two statements are true? (Choose two.)

  A. If the local files cannot be found, the system will search the NIS map for the host.
  B. If the NIS map gives a "no such entry" response, the system will stop searching for the host.
  C. If the NIS map gives a "no such entry" response, the system will search local files for the host.
  D. If the NIS map does NOT respond or is unavailable, the system will stop searching for the host.
  E. If the NIS map does NOT respond or is unavailable, the system will search local files for the host.
  B. If the NIS map gives a "no such entry" response, the system will stop searching for the host.
  E. If the NIS map does NOT respond or is unavailable, the system will search local files for the host.

• Question 342:

  Click the Exhibit button.

  

  Given the system logging messages, which two statements are true? (Choose two.)

  A. The SSH server is not running after booting.
  B. The SSH service tried to start just one time.
  C. The SSH service encountered errors while starting.
  D. The LP print service is running successfully after booting.
  E. The SSH and LP services have the same reason for not starting.
  A. The SSH server is not running after booting.
  C. The SSH service encountered errors while starting.

• Question 343:

  Which two entries are valid for the contents of the /etc/hostname.ce0 file? (Choose two.)

  A. corprouter1
  B. 192.168.10.1
  C. ce0 192.168.10.1
  D. ifconfig ce0 inet 192.168.10.1
  A. corprouter1
  B. 192.168.10.1

• Question 344:

  The SPARC-based workstation systems in your accounts department need their PROMs upgraded. Some of the systems fail to upgrade. What is the cause?

  A. The write protect jumper has not been set correctly.
  B. The systems do not have enough memory.
  C. The system is running an earlier version of Solaris OS.
  D. The patch is corrupt.
  A. The write protect jumper has not been set correctly.

• Question 345:

  A SPARC-based system is rebooted, but no one can gain access to it. When investigating, the console shows this message:

  Rebooting with command: boot

  Boot device: /sbus@1f, 0/SUNW, fas@e, 8800000/sd@0, 0 File and args:

  SunOS Release 5.10 Version Generic 64-bit

  Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved.

  Use is subject to license terms.

  Cannot open '/etc/path_to_inst'

  Program terminated

  Which two actions can you take to get the system working again? (Choose two.)

  A. boot -s
  B. boot -r
  C. boot -ars
  D. boot /etc/path_to_inst
  B. boot -r
  C. boot -ars

• Question 346:

  Given the add_install_client script executed with the options:

  # ./add_install_client -d -b "input-device=ttya" -b "output-device=ttya" SUNW.i86pc i86pc

  Which two statements are true? (Choose two.)

  A. The console is directed to a serial port.
  B. The console is directed to the video port.
  C. This applies to all x86-based systems being network installed using PXE.
  D. This applies only to the system with a host name of SUNW.i86pc being network installed using PXE.
  E. The system to be installed using PXE must be booted using a diskette before it accesses the network.
  A. The console is directed to a serial port.
  C. This applies to all x86-based systems being network installed using PXE.

• Question 347:

  Which three FORTH Monitor commands allow you to boot a SPARC-based system? (Choose three.)

  A. ok boot net
  B. ok reboot
  C. ok boot net:rarp
  D. ok boot -as cdrom
  E. ok boot ip=192.168.1.1
  A. ok boot net
  C. ok boot net:rarp
  D. ok boot -as cdrom

• Question 348:

  Given: online

  

  Which two statements are true? (Choose two.)

  A. The processes required for the telnet service are running.
  B. Running svcs -p network/ssh will return the PID of sshd.
  C. Running svcs -x will return the process IDs for the telnet service.
  D. Running kill /network/telnet will shut down the telnet service.
  E. Running svcadm clear ssh will try to restart the ssh service.
  A. The processes required for the telnet service are running.
  E. Running svcadm clear ssh will try to restart the ssh service.

• Question 349:

  You have an x86-based server with two SATA drives. Each drive has an installation of x86 Solaris and both drives are identical. The system currently boots from the first SATA disk drive, but, after modifying the /etc/vfstab file on the boot drive, the first SATA drive will not boot. You want to boot the system from the second SATA disk drive, but it won boot. want to boot the system from the second SATA disk drive, but it won boot. What do you need to do to get the system booted?

  A. Select the second SATA drive in the GRUB menu during bootup; boot to the second drive; once booted to the second drive, mount and copy the /etc/vfstab file to the boot disk.
  B. Edit the boot string in the GRUB menu to boot from the second SATA drive; once booted to the second drive, mount and fix the /etc/vfstab file on the boot disk.
  C. Install a bootblock onto the second SATA drive; select the second drive during bootup; once booted to the second drive, mount and fix the/etc/vfstab file on the boot disk.
  D. Boot from DVD to get into a single user shell; mount and fix the /etc/vfstab file on the boot drive.
  D. Boot from DVD to get into a single user shell; mount and fix the /etc/vfstab file on the boot drive.

• Question 350:

  You are preparing to install several UltraSPARC machines that will function as servers using JumpStart. Since these machines are servers, you want to disable the power management feature of Solaris 10 OS during installation. What JumpStart configuration technique must you use to disable power management during a JumpStart installation?

  A. add the line powermanagement=FALSE to the sysidcfg file
  B. add the line powermanagement FALSE to the profile file
  C. create a finish script containing the line touch /a/noautoshutdown
  D. There is no way to disable power management if you are using JumpStart.
  D. There is no way to disable power management if you are using JumpStart.