Oracle 1Z0-1066-22 Online Practice Questions and Exam Preparation

Oracle 1Z0-1066-22 Online Questions & Answers

• Question 101:

  When duplicating a supply plan, which parameters can you modify if Copy Type is "copy plan options only"?

  A. Name, Access. Owner, and Notes
  B. Name, Description. Access (but if the original plan was private, you can't edit the Users list), and Notes
  C. Name, Description. Access. Supply Planning Mode, and Owner
  D. Name, Description. Access. Owner. Include Archive, and Notes
  A. Name, Access. Owner, and Notes

• Question 102:

  Your client has made a change to item costs. What type of collection do they need to run to only pick up this change?

  A. Run targeted collection for item costs.
  B. Must run full data collection. It is not possible to update just item costs.
  C. Run net change collection for item costs.
  D. Item costs cannot be updated via a data collection processes.
  E. Item costs is automatically updated. No data collection is necessary.
  A. Run targeted collection for item costs.

• Question 103:

  How does the Demand Fulfillment view prioritize at-risk demands?

  A. Based on the order value per customer weighted by the number of associated recommendations required to make the demand no longer at risk
  B. Based on order value weighted by the number of compression days required to make the demand no longer at risk
  C. Based on order value weighted by the number of associated recommendations required to make the demand no longer at risk
  D. Based on the number of associated recommendations required to make the demand no longer at risk
  C. Based on order value weighted by the number of associated recommendations required to make the demand no longer at risk

  ---

  Explanation/Reference:

  Review and Improve Your Demand Fulfillment

  To improve the demand fulfillment of your plan, use the Demand Fulfillment table to review the at-risk demands in your plan and their related recommendations. You can take actions to accept recommendations from this page.

  In the Demand Fulfillment UI, you can:

  View prioritized at-risk demands based on order values weighted by the number of associated recommendations.

  Take actions to accept or mark recommendations as complete. Review summary information provided for the current demand fulfillment position of your plan to analyze the potential for improvement based on selected at-risk demands. The

  information also provides an understanding of the expected demand fulfillment position based on accepted and completed recommendations.

  To review and improve your demand fulfillment:

  In a Supply Planning, Planning Central, or Demand and Supply work area, select the Manage Plans task.

  On the Manage Plans page, search for and open your plan.

  In the Page Layout list, select Plan Summary.

  Note that the tiles in the Plan Summary layout include a Demand at Risk in thousands tile. In the Demand at Risk in thousands tile, click the Select Tile bar to review the Demand at Risk Summary data.

  You can review the demand at risk data through a treemap view or a table view, the treemap view is the default. To switch to the table view, click the Show Table icon.

  To review the demand at risk data:

  The Demand Fulfillment UI shows the individual orders that are at-risk and their related recommendations.

  Tip: You can open the Demand Fulfillment table directly without drilling from the Plan Summary. After you open a plan, click the Open button at the page level. In the Open Table, Graph, or Tile Set dialog box, search for and select the

  Demand Fulfillment table. In the Demand Fulfillment UI, you can search for at-risk demands by using the filter fields in the search panel.

• Question 104:

  Which two statements are true when using Measure catalogs? (Choose two.)

  A. The predefined measure catalog is not the system default.
  B. The measure catalog has a collection of measures that you can enable for use in a single plan in the Planning Central work area.
  C. You can restrict access to Measure Catalogs using Administer Data Security.
  D. You can add or remove measures from a measure catalog.
  E. Measure catalogs are defined in the system to improve the performance of the plan.
  F. You navigate to Configure Measure Catalogs to edit the Catalog.
  B. The measure catalog has a collection of measures that you can enable for use in a single plan in the Planning Central work area.
  D. You can add or remove measures from a measure catalog.

  ---

  

  Explanation/Reference:

• Question 105:

  Which KPIs are available to measure forecasting accuracy and specify how these measures aggregated from item-organization level to higher levels.

  A. MAPE, MAD, and Bias are used to measure forecast accuracy. MAD and Bias are aggregated using sum. MAPE is aggregated using weighted average.
  B. MAPE, MAD, and Bias are used to measure forecast accuracy. MAPE and Bias are aggregated using weighted average. MAD is aggregated using sum.
  C. MAPE, MFE, and Bias are used to measure forecast accuracy. MAPE and Bias are aggregated using weighted average. MFE is aggregated using sum.
  D. MAPE, MFE, and Bias are used to measure forecast accuracy. MAPE and MFE are aggregated using weighted average. Bias is aggregated using sum.
  A. MAPE, MAD, and Bias are used to measure forecast accuracy. MAD and Bias are aggregated using sum. MAPE is aggregated using weighted average.

• Question 106:

  Which disaggregation methods are used for each of these measures: adjusted shipments forecast, target service level, and shipments forecast?

  A. Adjusted shipments forecast uses measure, target service level uses same value, and shipments forecast uses self.
  B. Adjusted shipments forecast uses proportional, target service level uses same value, and shipments forecast uses measure.
  C. Adjusted shipments forecast uses measure, target service level uses same value, and shipments forecast doesn't have any disaggregation method.
  D. Adjusted shipments forecast uses measure, target service level uses equal, and shipments forecast doesn't have any disaggregation method.
  E. Adjusted shipments forecast uses equal, target service level uses same value, and shipments forecast uses measure.
  A. Adjusted shipments forecast uses measure, target service level uses same value, and shipments forecast uses self.

• Question 107:

  Your client wants to exclude all of the inventory from the 'Reject' subinventory from only one of their supply plans. What action must be taken to meet this requirement?

  A. Manage Plans > Search and select supply plans > 'Organizations and Schedules' tab > 'Organizations' > 'Subinventory Netting' > Deselect 'Reject' subinventory for each organization
  B. Manage Subinventories > Search and select subinventory > Deselect 'Nettable'
  C. It is not possible to exclude one subinventory from a particular supply plan.
  D. Manage Plans > Search and select supply plans > 'Organizations and Schedules' tab > 'Supply Schedules' > 'Subinventory Netting' > Deselect 'Reject' subinventory for each organization
  E. Manage Subinventories > Choose a material status in which 'Nettable' is unchecked
  A. Manage Plans > Search and select supply plans > 'Organizations and Schedules' tab > 'Organizations' > 'Subinventory Netting' > Deselect 'Reject' subinventory for each organization

• Question 108:

  Where do you view the collected data for Organizations, Customers, Suppliers, Carriers, and Interlocation Shipping Networks?

  A. View Simulation Sets
  B. Review Plan Inputs
  C. Maintain Supply Network Model
  D. View Collected Data
  E. Planning Analytics
  C. Maintain Supply Network Model

• Question 109:

  A supply plan has just been run that contains a configured item. You notice that the sourcing rules of the base model were used instead of sourcing rules for the configured item. Why did this happen?

  A. No sourcing rules have been defined for the configured item.
  B. The sourcing rules of the base model overrode the sourcing rules of the configured item.
  C. It is not possible to create sourcing rules for the configured item; all configured items always use the same sourcing rules as the base model.
  D. The sourcing rules of the base model had a priority of 1, while the sourcing rules of the configured item had a priority of 2.
  E. No planning percentages were defined at the operation level within the work definition.
  A. No sourcing rules have been defined for the configured item.