Riverbed 101-01 Online Practice Questions and Exam Preparation

Riverbed 101-01 Online Questions & Answers

• Question 141:

  You need to purchase a Steelhead appliance model for one of your engineering branch offices. Below are the requirements that need to be met:

  200 users with 15 TCP connections each 15 Mbps WAN link Will be sending across the WAN about 20 GB of new data daily A Windows 2003 Server and video streaming Riverbed Services Platform (RSP) will be used

  Which of the following models will be the most appropriate for this branch office?

  A. Steelhead 2050-M
  B. Steelhead 5050-M
  C. Steelhead 550-M
  D. Steelhead 550-H
  E. Steelhead 250-H
  A. Steelhead 2050-M

• Question 142:

  Datastore synchronization can be used in which of the following deployments?

  A. Serial in-path
  B. Logical in-path
  C. Server-side out-of-path
  D. Parallel in-path
  E. All of the above
  E. All of the above

• Question 143:

  In a network where QoS classification and enforcement is being performed by the customer's carrier-managed WAN routers and QoS traffic classification is based on IP address and/or destination TCP port, what WAN visibility mode should be employed for TCP sessions optimized by the Steelhead appliances to maintain interoperability with the existing QoS strategy?

  A. Full Transparency
  B. Correct Addressing
  C. Port Transparency
  D. Port Mapping
  A. Full Transparency

• Question 144:

  What does "Branch managed" mean when adding a SteelHead to the SteelCentral Controller for SteelHead (SCC) inventory?

  A. This SteelHead is fully managed by the SCC.
  B. This SteelHead has SteelFusion capability.
  C. Another SCC as well as this one manages this SteelHead.
  D. This SteelHead supports DNS caching and/or RSP or VSP policies.
  E. The SteelHead is not under control of the SCC. Only reports and status information are available.
  E. The SteelHead is not under control of the SCC. Only reports and status information are available.

• Question 145:

  What is the purpose of Simplified Routing?

  A. Simplified routing will properly report netflow to the profiler in an out-of-path deployment allowing for the use of a "Fake interface ID".
  B. Simplified routing will allow for redundant gateways such as HSRP and VRRP and GLBP.
  C. Simplified routing enables an out-of-path SteelHead to understand the LAN and WAN side subnets.
  D. Simplified routing will prevent packets traversing the SteelHead more than once when the SteelHead is deployed on a transit subnet (AKA `Packet Richohel').
  E. Simplified routing will prevent VLAN leakage between Layer two domains when optimizing more than one VLAN.
  D. Simplified routing will prevent packets traversing the SteelHead more than once when the SteelHead is deployed on a transit subnet (AKA `Packet Richohel').

• Question 146:

  With RiOS v9.0 and later, what does a 'topology' consist of? (Choose three.)

  A. Uplinks
  B. Networks
  C. Services
  D. Applications
  E. Sites
  A. Uplinks
  B. Networks
  E. Sites

• Question 147:

  How can Steelhead Mobile client software be distributed directly from the Steelhead Mobile Controller (SMC)? (Select 2)

  A. HTTPS
  B. HTTP
  C. FTP
  D. TFTP
  E. NFS
  A. HTTPS
  B. HTTP

• Question 148:

  A service provider would like to implement multi-tenanting on a SteelCentral Controller for SteelHead (SCC) such that the customers would be able to run their own reports. Which of the following are true?

  A. SCC does not support multi-tenancy. A virtual or physical SCC would need to be provisioned for each customer.
  B. The SSL certificate for SCC management would need to be distributed to the customers.
  C. RADIUS or TACACS+ would need to be used to offload the authentication to achieve the privileges required.
  D. HTTP server should be disabled for the web UI and only SSL used.
  E. Each customer would have to be configured with privileges for their own SteelHeads and no others.
  A. SCC does not support multi-tenancy. A virtual or physical SCC would need to be provisioned for each customer.

• Question 149:

  What are valid WAN visibility modes of the Steelhead appliance? (Select 3)

  A. Correct Addressing
  B. Port Transparency
  C. Full Addressing
  D. Full Transparency
  E. Transparency
  A. Correct Addressing
  B. Port Transparency
  D. Full Transparency

• Question 150:

  What is the definition of an `endpoint' in a SteelHead Mobile deployment?

  A. A network interface on a SteelHead Mobile client computer
  B. The data store on a SteelHead Mobile client computer
  C. A SteelHead client computer
  D. SteelCentral Controller for SteelHead Mobile
  C. A SteelHead client computer