Simulation
Guidelines
This is a lab item in which tasks will be performed on virtual devices.
1. Refer to the Tasks tab to view the tasks for this lab item.
2. Refer to the Topology tab to access the device console(s) and perform the tasks.
3. Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window.
4. All necessary pre-configurations have been applied.
5. Do not remove any existing configurations from the devices, only those necessary to make the appropriate changes required to fulfill the listed tasks.
6. Do not change the enable password or hostname for any device.
7. Save your configurations to NVRAM before moving to the next item.
8. Click Next at the bottom of the screen to submit this lab and move to the next question.
9. When Next is clicked, the lab closes and cannot be reopened.
Topology
Tasks
Task 1
1. Configure a host route on R5 for the destination of 10.200.220.6.
2. Configure a static default route on R1 preferring the path through R3 towards R6.
3. From R5, use traceroute and ping to verify the path towards and reachability of R6.
Task 2
1. Configure a floating static default route on R1, preferring the path through R2 towards R6 if the link to R3 should fail.
2. Configure the administrative distance for 225.
3. Configure a static route on R2 to forward the return traffic towards 10.100.110.0/25.
4. After shutting interface e0/1 on R1, use traceroute and ping from R5 to verify path towards and reachability of R6.
Not auto-scored - compare your configuration against the model answer.