Free JN0-102 Web TestEngine Demo

Q58 Single choice

Referring to the exhibit, you are asked to rate-limit traffic from Web-Server to the subnet where Mal-User is located. All other traffic should be permitted.

Which firewall filter configuration do you use?

A
[edit firewall]user@router# showpolicer LIMIT-MAL-USER {if-exceeding {bandwidth-limit 400k;burst-
size-limit 100k;}then discard;}familyinet {filter STOP-MAL-USER {term one {from {source-address
{100.100.100.10/32;}destination-address {200.200.200.0/24;}}thenpolicer LIMIT-MAL-USER;}term two
{then accept;}}}
B
[edit firewall]user@router# showpolicer LIMIT-BAD-USER {if-exceeding {bandwidth-limit 400k;burst-
size-limit 100k;}then discard;}familyinet {filter STOP-MAL-USER {term one {from {source-address
{100.100.100.10/32;}destination-address {200.200.200.0/24;}}thenpolicer LIMIT-MAL-USER;}term two
{then accept;}}}
C
[edit firewall]user@router# showpolicer LIMIT-MAL-USER {if-exceeding {bandwidth-limit 400k;burst-
size-limit 100k;}then discard;}familyinet {filter STOP-MAL-USER {term one {from {source-address
{100.100.100.10/32;}destination-address {200.200.200.0/24;}}thenpolicer LIMIT-MAL-USER;}term two
{then reject;}}}
D
[edit firewall]user@router# showpolicer LIMIT-MAL-USER {if-exceeding {bandwidth-limit 400k;burst-
size-limit 100k;}then discard;}familyinet {filter STOP-MAL-USER {term one {from {source-address
{200.200.200.0/24;}destination-address {100.100.100.10/32;}}thenpolicer LIMIT-MAL-USER;}term two
{then accept;}}}

JN0-102 Web TestEngine demo