H12-722 Web TestEngine demo

[USG] interface G0/0/1
[USG] ip urpf loose allow-default-route acl 3000

Select all that apply.

• A

  For loose inspection: if the source address of the packet exists in the FIB of the firewall, the packet passes the inspection directly.

• B

  In the case where the default route is configured but the parameter allow-default-route is not configured, if the source address of the packet does not exist in the FIB table of the firewall, the packet will be rejected.

• C

  When the default route is configured and the parameter allow-default-route is also configured, if the source address of the packet does not exist in the FIB table of the firewall under loose check mode, all packets will pass the URPF check and be forwarded normally.

• D

  When the default route is configured and the parameter allow-default-route is also configured, if the source address of the packet does not exist in the FIB table of the firewall under loose check mode, the packet cannot pass the URPF check.