Microsoft Microsoft Certifications MB-320 Questions & Answers

• Question 171:

  You are building the Bill of materials (BOM) for a new production item. The new item has a subcomponent.

  Subproduction orders for the subcomponent must be created when estimating production orders.

  You need to configure the BOM line to generate subproduction orders.

  Which BOM line type should you use?

  A. Phantom

  B. Vendor

  C. Item

  D. Pegged supply

  Correct Answer: D

  References:

  https://docs.microsoft.com/en-us/dynamics365/unified-operations/supply-chain/production-control/bill-of- material-bom

• Question 172:

  Note: This question is part of series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while

  others might not have a correct solution.

  After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  A company produces and distributes seafood to supermarkets. During the manufacturing process, raw seafood is purchased, cleaned, and packaged into various-sized boxes. Each box may have a different weight.

  Product is sold by the box and priced by the pound.

  You need to ensure that you can perform transactions at the box level and record the net weight of goods shipped to a customer. Solution: Set up the product as a catch weight item with serial control. Set the catch weight unit to box and the inventory unit to pounds. Does the solution meet the goal?

  A. Yes

  B. No

  Correct Answer: A

  Reference: https://docs.microsoft.com/en-us/dynamicsax-2012/appuser-itpro/about-catch-weight-items

• Question 173:

  A manufacturing plant uses Lean manufacturing. Operators process Kanban consumption manually by using a mobile device.

  The production team must use automatic empty registration for some of the event Kanbans. Registration must occur when the last job of a Kanban is completed.

  You need to update the Kanban rule to meet this requirement.

  What Kanban setting should you update?

  A. Select to register as empty when the source requirement is registered

  B. Select to register as empty when handling units are received

  C. Select to manually register as empty

  D. Set a fixed Kanban quantity

  Correct Answer: B

  References: https://docs.microsoft.com/en-us/dynamics365/supply-chain/cost-management/backflush-costing

• Question 174:

  You are the production planner for a manufacturing company.

  After running operations scheduling for a production order, the following error message displays:

  

  You need to identify the cause of the error.

  Which two actions should you perform? Each correct answer presents part of the solution.

  NOTE: Each correct selection is worth one point.

  A. Navigate to the work calendar and view working times. Validate that there are working days created in the scheduled period.

  B. Review the calendar for the resource to determine if it is expired.

  C. Review the available resources for Operation 10. Navigate to the Resource form and validate whether there is a calendar assigned.

  D. Review the resource group assigned to Operation 10. Check to see if there is a calendar assigned and if the calendar is expired.

  Correct Answer: BC

• Question 175:

  You have a product that can be manufactured on two different production lines in the same warehouse. You create resources and then create individual input locations for the resources. You create two routes.

  Each route uses different resources.

  Materials are staged for consumption in different locations based on the resources being utilized for production.

  You need to set up the formula to consume the goods from the correct line-side location.

  What should you do?

  A. Select a warehouse and consumption operation for each line.

  B. Select resource consumption and the operation for each line.

  C. Select the plan group and consumption operation for each line.

  D. Specify a site in the formula header.

  Correct Answer: B

• Question 176:

  You are responsible for training the operations staff on production transactions in Dynamics 365 Supply Chain Management. The company uses backflushing for material consumption principles.

  You need to train the operators on how to report unintended scrap.

  What are two possible ways to achieve this goal? Each correct answer presents a complete solution.

  NOTE: Each correct selection is worth one point.

  A. Report additional time in route card journal

  B. Post additional materials in a picking list journal

  C. Report an error quantity at Report as finished

  D. Report an additional good quantity at Report as finished

  Correct Answer: BC

• Question 177:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions,

  while others might not have a correct solution.

  After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  A company implements Dynamics 365 Supply Chain Management for their Lean manufacturing environment.

  There has been an engineering change to a fixed quantity product that is in production. This change will add an additional processing step as the second step. The existing version must be phased out and replaced by the new version.

  You need to ensure that the engineering change takes affect at the end of the month.

  Solution:

  1.) Edit the existing step number two activity to be the new engineering process 2.) Edit the existing production flow. Set the expiration date due to the end of the month 3.) Edit the existing Kanban rule. Set the expiration date to the end of the month 4.) Activate the production flow

  Does the solution meet the goal?

  A. Yes

  B. No

  Correct Answer: B

• Question 178:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions,

  while others might not have a correct solution.

  After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  A company implements Dynamics 365 Supply Chain Management for their Lean manufacturing environment.

  There has been an engineering change to a fixed quantity product that is in production. This change will add an additional processing step as the second step. The existing version must be phased out and replaced by the new version.

  You need to ensure that the engineering change takes affect at the end of the month.

  Solution: 1.) Create an activity for the new process step and add it to the existing production flow. Set the expiration date to the end of the month 2.) Create a Kanban rule that incorporates the new activity with an effective date of end of the month 3.) Edit the existing Kanban rule. Set the expiration date to the end of the month. 4.) Activate the new production flow

  Does the solution meet the goal?

  A. Yes

  B. No

  Correct Answer: B

• Question 179:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions,

  while others might not have a correct solution.

  After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  A company implements Dynamics 365 Supply Chain Management for their Lean manufacturing environment.

  There has been an engineering change to a fixed quantity product that is in production. This change will add an additional processing step as the second step. The existing version must be phased out and replaced by the new version.

  You need to ensure that the engineering change takes affect at the end of the month.

  Solution:

  1.) Add a new version to the existing production flow. Set the expiration date to the end of the month.

  2.) Create an activity for the new process step and add it in the proper sequence 3.) Create a Kanban rule that incorporates the new activity. Set the expiration date to the end of the month. 4.) Edit the existing Kanban rule. Set the expiration date to the end of the month. Specify the new Kanban rules as the replacement rule

  Does the solution meet the goal?

  A. Yes

  B. No

  Correct Answer: B

• Question 180:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions,

  while others might not have a correct solution.

  After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  A manufacturing plant uses Lean process. You plan to outsource a painting operation to a subcontracting vendor. You create a service item named SP-01 to represent the painting service.

  You need to create a subcontracting activity for the painting service.

  Solution: 1.) Create a purchase agreement for the subcontracting vendor that contains the pricing information for SP-01 2.) Create a vendor resource and a work cell for outsourced painting, then add the resource to the work cell 3.) Create a production flow process activity using the painting work cell and the service item as the picking activity 4.) Create a service term on the activity to tie the purchase agreement to the activity

  Does this solution meet the goal?

  A. Yes

  B. No

  Correct Answer: A

  References:

  https://docs.microsoft.com/en-us/dynamics365/unified-operations/supply-chain/production-control/activity- based-subcontracting