You have several users who dial in to a remote access server using multilink connections, combining two modems into a single link. Although this provides a higher bandwidth to the users, you find the server runs out of modem lines frequently, and most users are not using their connections to their full potential. Which of the following is a solution to this issue?
A. Disable multilink connections.
B. Set the maximum number of multilink ports to one.
C. Use VPN instead of dial-in access.
D. Enable Bandwidth Allocation Protocol (BAP).
You have configured a VPN server running Windows Server 200 and RRAS. Most clients are able to access the server, but clients running Windows 98 are reporting that they are unable to connect. Which of the following is most likely the cause of this problem?
A. Computer certificates are not installed.
B. L2TP is not enabled on the server.
C. PPTP is not enabled on the server.
D. Windows 98 does not support VPN client access.
You have configured a WAP using the EAP-TLS protocol. The WAP is connected to a LAN with a Windows Server server. Which of the following additional tasks may be necessary to ensure that wireless clients can connect? (Choose all that apply.)
A. Enable PPP authentication.
B. Issue computer certificates to clients.
C. Issue user certificates or smart cards to users.
D. Install and configure IAS.
You have recently purchased a new single-CPU, Intel Xeon-based server. This hardware will be used to run a multithreaded CPU-intensive application. How can you ensure that the application performs at its best on the hardware provided?
A. Turn on hyperthreading.
B. Add a second CPU.
C. Boost the processing priority of the applications threads.
D. Disable hyperthreading.
You are working on an existing server. The NIC manufacturer has notified you of an updated driver for your card that will greatly improve performance. You download and install the new driver. Before you reboot the system, you perform an ASR backup. When you reboot the system, it reaches the graphical portion of the boot process and presents a STOP message. What is the proper process for recovering from this problem?
A. Perform an ASR restore from the ASR backup set you created before the reboot.
B. Reboot the system, press F8 when prompted during the boot process, select Last Known Good Configuration, and press Enter.
C. Reinstall the operating system and do a restore of the system from tape backup.
D. Reboot the system, press F8 when prompted during the boot process, select Safe Mode, and press Enter.
You are a consultant. You have been called in to troubleshoot a malfunctioning NLB cluster that is supposed to serve Web pages with IIS. The cluster contains four hosts, but only one host at a time will successfully form the cluster. Clients appear to have no problems connecting to any of the single-host cluster configurations. What is the most likely cause of the problem?
A. The hosts are configured with duplicate priorities.
B. The hosts are configured with different port rules.
C. The hosts are configured with different cluster IP addresses.
D. The hosts are configured with duplicate cluster IP addresses.
One of your hosts in multiple-host NLB cluster requires maintenance. The cluster is heavily used and central to the profitability of your company. You want to bring the node down for service in the least disruptive way. How should you accomplish this goal?
A. Use the drainstop option on the host needing maintenance.
B. Use the drainstop option on all the hosts in the cluster not needing maintenance.
C. Use the suspend option on the host needing maintenance.
D. Use the suspend option on all the hosts in the cluster not needing maintenance.
You have been hired as a consultant to help deploy IPSec for the network of a mediumsize manufacturing firm that is developing a number of new products and must share sensitive data about its products over the network. As part of the planning process, you must determine the best authentication method to use with IPSec. What are the authentication methods that can be used with IPSec? (Select all that apply.)
A. Kerberos v5
B. Perfect Forward Secrecy (PFS)
C. Shared secret
D. Diffie-Hellman groups
You want to use the RSoP tool in logging mode to build some reports on the existing policy settings of one of your client computers. You have used RSoP before in planning mode, but never in logging mode. You open the RSoP Wizard from the Active Directory Users and Computers console, as you’ve done before, but you notice that there is no mechanism for selecting the mode, and only planning mode seems to be available. What is the problem?
A. The RSoP Wizard runs only in planning mode.
B. You should open the RSoP Wizard from Active Directory Sites and Services instead.
C. You should open the RSoP Wizard from the RSoP MMC instead.
D. You can select logging mode when you open the RSoP in Active Directory Users and Computers. You must have overlooked the option.
You have recently hired a new junior administrator to assist you in running the network for a medium-sized manufacturing company. You are explaining to your new assistant that AD objects are assigned security descriptors to allow you to implement access control. You tell your assistant that the security descriptor contains several different components. Which of the following are contained in the security descriptor for an object? (Select all that apply.)
A. Discretionary access control list
B. System access control list
C. Dynamic access control list
D. Ownership information
Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Juniper exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your JPR-934 exam preparations and Juniper certification application, do not hesitate to visit our Vcedump.com to find your solutions here.