Aruba Aruba Certifications ACMP_6.4 Questions & Answers

• Question 81:

  A controller is provisioned in L3 Mode for Wireless Users. What must be configured on the controller to enable DHCP requests to an external DHCP server?

  A. an IP helper command

  B. the IP address of the DNS server

  C. the IP address of the APs

  D. the subnet address of the DHCP server

  E. the DHCP server IPSEC Key

  Correct Answer: A

• Question 82:

  

  Referring to the diagram provided for this question, in which locations must you define the new data VLANs for wirelessclienttraffic?(Choosetwo)

  A. in all L2 switches where an Aruba AP is physically connected

  B. in all APs and the L2 switches to which they are connected

  C. in the Aruba controller and the router it's connected to in an L2 deployment

  D. in the routers and switches where the APs are physically connected

  E. only on the Aruba controller in an L3 deployment

  Correct Answer: CE

• Question 83:

  An Aruba Controller is configured with VLAN 1, 5, 200, and 4095. All VLANs have IP addresses assigned. Which is the default management VLAN on the Aruba controller?

  A. VLAN 5

  B. VLAN 1

  C. VLAN 200

  D. None, it must be defined

  E. VLAN 4095

  Correct Answer: B

• Question 84:

  What is the total number of charts you can simultaneously monitor in a spectrum dashboard?

  A. 3

  B. 4

  C. 8

  D. 9

  E. 12

  Correct Answer: E

• Question 85:

  What is true about an AP in Hybrid Spectrum mode?

  A. Scan home channel and services client traffic on home channel

  B. Scans all channels and services clients on home channel

  C. Puts the selected band in spectrum mode and services clients on other band

  D. Makes the AP a spectrum monitor, but does not affect other APs in the AP-group

  E. All APs in AP-group scan home channel and service clients

  Correct Answer: A

• Question 86:

  A customer has a remote AP deployment, where each remote AP has an IPSEC VPN tunnel with L2TP to the controller. 1 of the remote APs is stuck in the user table and hasn't yet transitioned to the AP active table in the controller. The customer suspects that the AP is not setting up its VPN connection successfully. Which of the following commands might be useful in troubleshooting this? (Choose three.)

  A. Logging level debugging security process localdb

  B. Logging level debugging security process l2tp

  C. Logging level debugging security process dot1x

  D. Logging level debugging security process crypto

  E. Logging level debugging security process vpn

  Correct Answer: ABD

• Question 87:

  Which profiles are required in an AP Group to enable an SSID with VLAN 1, WPA2 and LMSIP?(Choose three)

  A. Virtual-AP profile

  B. WLAN profile

  C. 802.1x authentication profile

  D. AP System Profile

  E. SSID Profile

  Correct Answer: ADE

• Question 88:

  A user connected to a Captive Portal VAP successfully. When the user opens their browser and tries to access their homepage, they get redirected as expected to another URL on the Aruba Controller. However, they see an error message that web authentication has been disabled. What might be a cause of this?

  A. Captive Portal has not been assigned in the SSID profile.

  B. The Captive portal profile has not been assigned to the AAA profile.

  C. A server group has not been assigned to the captive portal profile.

  D. An initial role has not been assigned to the AAA profile.

  E. The Captive portal profile has not been assigned to the initial role.

  Correct Answer: E

• Question 89:

  A Server Group has been configured with three Radius servers. Load balancing has been enabled. Choose the correct statement?

  A. All Radius request are sent round robin continuously

  B. 10 request are sent to first server then 10 to the next server

  C. Only the first two servers are used and the third is a backup server

  D. Runs average response times and balances the load accordingly

  E. To use Load Balancing EAP Termination must be enabled

  Correct Answer: D

• Question 90:

  

  ,

  

  View the Server group and User Roles screen shots above.

  A user associated to an SSID with 802.1x using this server group. RadiusNY returned a standard radius

  attribute of filter-Id with a value of "employee". The user was placed in the guest Role. What statements

  below are correct?(Choose two)

  A. The user was placed in the 802.1x authentication default Role guest

  B. The user was placed in the initial Role guest

  C. Role derivation failed because roles are case sensitive

  D. Role derivation failed because the incorrect operation "value-of" was used

  E. 802.1x authentication failed so the user was automatically placed in the guest Role

  Correct Answer: AC