A server has lost half of its paths to its LUN on a storage system. The help desk determines that one of the two HBAs was just replaced. The SAN administrator has modified the zoning with the new WWPN of the replacement HBA port, but the missing paths have still not recovered.
Which action would you perform next?
A. Rescan disks on the server.
B. Reconfigure persistent binding on the server.
C. Reboot the server.
D. Modify the host definitions for LUN masking on the storage system.
What are two concerns when trying to migrate from one cloud storage provider to another one? (Choose two.)
A. Stability
B. Accessibility
C. Different drive types
D. CAN protocol compatibility
You have two new FC switches from the same vendor and want to connect them together. You have ensured that the domain IDs are unique, switch names are unique, and the firmware levels are identical. When you connect the ISL cables from one switch to the other, the fabric does not merge.
What should be confirmed?
A. Ensure the ISL ports are E_Ports.
B. Ensure the ISL ports are B_Ports.
C. Ensure the ISL ports are F_Ports.
D. Ensure the ISL ports are N_Ports.
You have been asked to secure your FC switches in the data center. Unsecure protocols have already been disabled but you also need to restrict access to the switches only from specific IP addresses located on the production network.
What should be used?
A. Roles
B. VSAN
C. ACL
D. Zone
What is the storage protocol used between initiators and targets connected to an FCoE fabric?
A. SATA
B. SCSI
C. SAS
D. FCoE
The enterprise storage system has the "call home" feature enabled and configured. However, the storage administrator has been told that "call home" is not working.
Which two actions should you perform? (Choose two.)
A. Verify SMTP settings.
B. Verify SNMP thresholds.
C. Verify firewall rules.
D. Verify the SMI-S configuration.
E. Verify VSAN configuration.
After the storage administrator merged two multi-vendor FC SANs, an error indicates that two ports have become isolated causing a segmentation to exist in the fabric.
Which two events would cause this? (Choose two.)
A. Overlapping zones
B. Different port names
C. Unsupported routing protocols
D. Different link speeds
You have completed installing your FC SAN. When everything is powered on, numerous devices are not available. You need to verify that the devices appear within the FC fabric by accessing the appropriate FC service that provides a list of devices and their respective function.
Which server within the Fibre Channel fabric would be used to do this?
A. Fabric Login server
B. Name server
C. Management server
D. Fabric Controller
Your company asks you to increase restore speeds. What should you do?
A. Upgrade existing LTO3 drives to LTO5 drives to take advantage of faster read/write speeds and larger tape cartridge sizes.
B. Add a mirrored disk based backup target that can be used for backups that support point-in- time recovery.
C. Attach the existing tape libraries to a backup server with local drives configured with RAID 5.
D. Attach a JBOD drive array to the backup media server to improve the read performance of the backup catalog.
A storage networking device has experienced a failure that has "phone home" and opened a service request for a part that can be a customer replaceable unit (CRU). Your support vendor has dispatched a replacement part using a secure courier service.
According to SNIA Storage Security Best Current Practices, which statement is correct about the repair process?
A. The support vendor's parts courier should have access to the secure data center to facilitate an unattended part swap-out bringing the fastest resolution to the failure.
B. The data center operations staff should accept the part and place it in a secure staging area awaiting a qualified administrator to perform the installation.
C. Any data center operator on-site should perform the part installation bringing the fastest resolution to the failure.
D. The support vendors parts courier should coordinate with a field service staff person from your support vender; both should have access to the secure data center to facilitate an unattended part swap-out.
Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only SNIA exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your S10-210 exam preparations and SNIA certification application, do not hesitate to visit our Vcedump.com to find your solutions here.